QUMFIXPU 20 Round Flush Mount Ceiling Fan with Lights User Manual

QUMFIXPU 20 Round Flush Mount Ceiling Fan with Lights

Product Information

The product is a ceiling fan with light and a remote control. The package contents include a ceiling fan light, a remote control wall bracket, a remote control, an auxiliary mounting tool, and an accessory pack. The fan blade should be twisted counterclockwise and locked into place for safety. The product can be mounted on wooden or concrete ceilings using screws with flat washers or lock washers, respectively.

Product Usage Instructions

1. Before assembly, ensure that all parts are in place and compare the details with the product display presentation.
2. If you have any questions, contact the seller through Amazon.
3. Use the auxiliary mounting tool S-hook to hang the ceiling fan with light under the ceiling.
4. Wiring:
   • Connect the black live wire marked L on the receiver to the live wire (typically black) on the socket box.
   • Connect the white neutral wire marked N on the receiver to the neutral wire (typically white) on the socket box.
   • Connect the ground wire (bare wire) from the base of the ceiling fan base with the ground wire (bare wire) of the socket box.
5. Remove the S-shaped hook and snap the 7-shaped hole of the ceiling fan light holder onto the cross-hanging plate.
6. Rotate the ceiling fan and snap the screws into the 7-shaped holes.
7. Tighten the 4 screws to complete the installation.
8. If your remote control does not work, replace the battery and try to program it.
9. Install AAA battery for remote control and take it out if not used for a long time to prevent damage to the transmitter.
10. Follow the instructions on the remote control to control the light and fan.
11. Turn off the main power supply that controls the ceiling fan and turn it on again. When turning on the light, press and hold the PAIR CODE button in the middle of the remote control within 5 seconds. If you hear the beep, the code matching is successful. Then try to see if the remote control can control the fan and light.

Important Safety Instructions

Caution:

1. Make sure the power supply of box or circuit breaker is shut off before wiring to avoid possible electric shock.
2. All wiring must be carried out under national and local specifications. Please consult a qualified electrician to ensure that the live, neutral, and ground wires are connected correctly.
3. If you do not have sufficient knowledge of electrical wiring, please have the fan installed by a licensed electrician.

Manual
Important: Please read and understand this manual before any assembly. Before assembling this product, please ensure that all parts are in place. Compare the details with the product display presentation. If you have any questions, don’t hesitate to contact us through Amazon.

Package contents

• A. Ceiling fan light x 1
• B. Remote control wall bracket x 1
• C. Remote control x 1
• D. 1S-hook (auxiliary mounting tool) x 1
• E. Accessory pack x 1

Product assembly

• Twist the bottom of the fan blade counterclockwise and lock it into  place to make it firm and safe. (fig.1)

Mounting options

a: Wooden ceiling

• If you have a wooden ceiling, use wood screws with flat washers. (fig.2)

b: Concrete ceiling

• If you have a concrete ceiling, use screws with lock washers.(fig.3)

Installation

• Step 1: Use the auxiliary mounting tool S-hook to hang the ceiling fan with light under the ceiling.(fig.4)

Step 2: Wiring(fig.5)

• a. Connect the black live wire marked “L” on the receiver to the live wire (typically black) on the socket box.
• b. Connect the white neutral wire marked “N” on the receiver to the neutral wire (typically white) on the socket box.
• c. Connect the ground wire (bare wire) from the base of the ceiling fan base with the ground wire (bare wire) of the socket box.
• Step 3 ：Remove the S-shaped hook and snap the 7-shaped hole of the ceiling fan light holder onto the cross-hanging plate.(fig.6)
• Step 4: Rotate the ceiling fan and snap the screws into the 7-shaped holes.(fig.7)
• Step 5: Tighten the 4 screws to complete the installation.(fig.8)

Warm Tips

• If your remote control does not control the fan and lights, please follow the steps below to undo the fault.
• Step 1 : Replace the battery of the the remote control.
• Step 2: Try to program the remote control.
• Please turn off the main power supply that controls the ceiling fan and turn it on again. When turning on the light, press and hold the PAIR CODE button in the middle of the remote control within 5 seconds. If you hear the beep, the code match-ing is successful. Then try to see if the remote control can control the fan and light.

Remote control operation

• Install the AAA battery. Please take out the battery If not used for a long time to prevent damage to the transmitter.(fig.9)
• The function of each button of the remote control is explained.(fig.10)

Important safety instructions

Caution

1. To acoid possible electric shock, make sure the power supply of box or circuit breaker is shut off before wiring.
2. All wiring must be carried out under national and local specifica-tions. Please consult a qualifise electrician to ensure that the live, neutral, and ground wires are connected correctly.
3. If you do not have sufficient knowledge of electical wiring, please have the fan installed by a licensed electrician.
4. The ceiling fan lignt mounting carrier is solid and can reliably support at least 66 lbs(30kg).
5. Mount the lowest moving parts at least 7.5ft(2.3m) above the floor or ground level.
6. Ensure that all electrical connections are sealed with appropriate connectors and electrical tape in the outlet box.
7. All set screws must be cheked and re-tingtened if necessary before operating the ceiling fan.

Remote control operation

This manual aims to make it as easy as possible for you to assem-ble, install, operate and maintain the ceiling fan. The tools listed below are required for assembly and installation.

Maintenance

Som connections may become loose due to the nayural movement of the fan. Check the support connections,brackets,and blade accseeories twice a year.Please make sure they are safe.

Care and cleaning

1. Dust your fan regularly with a soft, dry cloth. Do not use harsh cleaners or materials as they may damage the device.
2. To prevent bending of the blades during Cleaning, support the blades from pressure.
3. Keep the ceiling fan or fan blades clear of water, or it may cause a fire or electric shock, which leads to property loss.

Specifications

Product Name

| ****

Ceiling Fan Light

| ****

Item Size

| ****

19.7in*5.7in

---|---|---|---

Input Voltage

| ****

120V

| ****

LED

| ****

30-60W

Dimensions

| ****

1010ft-1313ft

| ****

Valid Remote Distance

| ****

10M

Battery Type| AAA*2| ****

Rotating Speed(rpm)

| 503-853r/min
Reversible| Yes| ****

Fan Timing

| 1H/2H

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>