Quality Stainless Products DB-6000-22 Bolt on Alignment Kit Instruction Manual
- October 30, 2023
- Quality Stainless Products
Table of Contents
Quality Stainless Products DB-6000-22 Bolt on Alignment Kit
Product Information
The DB-6000 kit is a set of components that can be assembled to create a ramp for vehicles. Various length ramps are included in the kit along with other components such as turnplate guide strips, rear slipplate, and front filler. The kit also includes different hardware arrangements such as 1 1/4 hardware, 2 3/8 hardware, 3 5/16 hardware, and 4 1/2 hardware.
Product Usage Instructions
- Clean the runways of any dirt and debris before starting the assembly process.
- Layout the DB-6000 kit onto the runways and mark the mounting holes.
- Remove the DB-6000 kit and touch-up any holes or scratches with paint.
- Allow the paint to dry according to the manufacturer’s recommended instructions.
- Starting at the end of the runway opposite the ramp, begin installing the DB-6000 components.
- After all parts have been secured, re-tighten all hardware.
Note: Refer to the assembly instructions for DB-6000-22 and DB-6000-24 for more detailed information on how to assemble these specific kits.
ASSEMBLY INSTRUCTIONS
- CLEAN RUNWAYS OF EXISTING DIRT & DEBRIS
- LAYOUT DB-6000 KIT ONTO RUNWAYS & MARK MOUNTING HOLES
- REMOVE DB-6000 KIT AND TOUCH-UP HOLES & SCRATCHES WITH PAINT
- ALLOW PAINT TO DRY (SEE MANUFACTURERS RECOMMENDED INSTRUCTIONS)
- BEGINNING AT THE END OF THE RUNWAY OPPOSITE THE RAMP, BEGIN INSTALLING DB-6000 COMPONENTS
- AFTER ALL PARTS HAVE BEEN SECURED, RE-TIGHTEN ALL HARDWARE
HARDWARE ARRANGEMENT
1| 1/4″ HARDWARE| 1/4-20 X 1 HEX HEAD CAP SCREW| 1/4″ USS FLAT WASHER| 1/4-20
NYLON INSERT LOCK NUT|
2| 3/8″ HARDWARE| 3/8-16 X 2-1/2 HEX HEAD CAP SCREW| 3/8″ USS FLAT WASHER|
3/8-16 NYLON INSERT LOCK NUT|
3| 5/16″ HARDWARE| 5/16-18 X 1-1/2 HEX HEAD CAP SCREW| 5/16″ USS FLAT WASHER|
5/16-18 NYLON INSERT LOCK NUT|
4| 1/2″ HARDWARE| 1/2-13 X 1-1/2 HEX HEAD CAP SCREW| 1/2″ USS FLAT WASHER|
1/2-13 NYLON INSERT LOCK NUT| 1/2″ SPLIT LOCK WASHER
DB-6000-22 DB-6000-24
DB-6000-22 & DB-6000-24
ASSEMBLY INSTRUCTIONS
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF QSP. ANY
REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFQSP IS
PROHIBITED.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>