PROSOCOUSTIC WRP-BP-Pair-BK WAVEPro Panels Instruction Manual

: October 30, 2023
: PROSOCOUSTIC

Table of Contents

PROSOCOUSTIC WRP-BP-Pair-BK WAVEPro Panels
Product Information
Product Usage Instructions
INCLUDED ITEMS PER PANEL
General Guidelines
Installation Instructions
WAVEPRO PANEL DIMENSIONS
FABRIC REPLACEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PROSOCOUSTIC WRP-BP-Pair-BK WAVEPro Panels

Product Information

WAVEPro Panels

WAVEPro Panels are acoustic panels designed and manufactured by ProSoCoustic/Full Scale AV. These panels are used to reduce unwanted noise in a room by absorbing sound waves. The panels come in different sizes, with the dimensions of 24 inches x 48 inches x 1.75 inches for the standard panel size. The panels are made of a wooden frame covered with acoustic fabric. The package includes one WAVEPro Panel, 18 Z-Clips (x2), and machine screws (x2). The Z-Clips are used to mount the panel on the wall. The package does not include additional installation materials such as wood/drywall screws, screwdriver/power drill, carpenter’s level, and drywall anchors.

Product Usage Instructions

Follow these steps to install your WAVEPro Panel:

Attach a Z-Clip to your WAVEPro Panel using the included machine screws. Screw the machine screws into your preferred pre-drilled machine screw inserts for vertical or horizontal placement. The part of the Z-Clip that lays flat against the panel should be on the top. Repeat the process for an additional Z-Clip set if you purchased them to add security to the bottom of the panel.
Attach the remaining Z-Clip to the wall using appropriate screws or wall anchors. The part of the Z-Clip that lays flat against the wall should be on the bottom. It is recommended to position Z-Clips on the wall using a laser/carpenter’s level or chalk line to ensure an even install. If possible, screw into a stud or other internal wall structure.
When all Z-Clips are installed, position your WAVEPro Panel against the wall with the panel’s Z-Clip slightly higher than the wall’s Z-Clip, then slide the panel down until the clips are secure.
For added security on a permanent installation, add a dab of RTV adhesive in the Z-Clip track before mounting.

For fabric replacement or installation videos on wall mounting, ceiling mounting, and fabric replacement, visit www.prosocoustic.com/videos.

INCLUDED ITEMS PER PANEL

RECOMMENDED ADDITIONAL INSTALLATION MATERIALS (Not Included)

General Guidelines

It is recommended to wear clean gloves to ensure fabric remains clean during installation.
Only handle the exterior sides of your Wave Pro panel to keep fabric taut.
When cleaning, DO NOT VACUUM. Clean with a lint roller to ensure quality of fabric.
Since wall materials vary, screws/accessories for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.

Installation Instructions

Attach a Z-Clip to your WAVEPro Panel by screwing the included Machine Screws into your preferred pre-drilled machine screw inserts (for vertical or horizontal placement). The part of the Z-Clip that lays flat against the panel should be on the top.
- If you purchased additional Z-Clips to add security to the bottom of the panel, repeat the process for the additional Z-Clip set.
Attach the remaining Z-Clip to the wall using the appropriate screws/wall anchors. The part of the Z-Clip that lays flat against the wall should be on the bottom. It is recommended to position Z-Clips on the wall using a laser/carpenterʼs level or chalk line to ensure an even install.
- Where possible, screw into a stud or other internal wall structure.
When all Z-Clips are installed, position your WAVEPro Panel against the wall with the panelʼs Z-Clip slightly higher than the wallʼs Z-Clip, then slide the panel down until the clips are secure.
- For added security on a permanent installation, add a dab of RTV adhesive in the Z-Clip track before mounting.

WAVEPRO PANEL DIMENSIONS

FABRIC REPLACEMENT

ProSoCoustic WAVEPro Panels use a screen spline insert to hold fabric in place and provide proper fabric tensioning. The inserted screen spline can be taken out for easy replacement of fabric. Replace fabric if:

Old fabric becomes damaged over time
A color change is desired
You want a custom-printed image made to turn your WAVEPro Panel into art

ProSoCoustic offers the option to sew screen spline directly into the fabric for an extremely simple fabric reinstallation. Safely store fabric in a weather-resistant, clean area and change your WAVEPro Panelʼs aesthetic as often as you want!

For more details, please visit: www.prosocoustic.com/videos

For installation videos on wall mounting, ceiling mounting, and fabric replacement scan the QR Code

ProSoCoustic is owned and operated by