Ruaiok B09SG1FWLF 850NM 7 Gear Infrared Digital Night Vision Binoculars User Manual

User Manual

Product Overview

Specification

• Still Image Size. 1M(1280×960)NGA(640×480)
• videos: 960P(1280×960@30FP5)NGA(640×480@30FPS)
• Aperture: F 1.2 f=25mm
• Lens Angle: FOV=10°, diameter is 24mm
• Display Screen: Inner screen 2.31″(960240) TFT; Outer screen 9848mm
• Digital Zoom: 4X
• Storage Media: Micro SD card, up to 32GB
• Viewing Distance in all dark: 200M-300M
• Viewing Distance in weak light: 3M—infinity
• IR LED: 3W,850nm
• USB Port: Micro USB 2.0
• Power Source: 9V, 6xAA
• Operating Temperature: -20°C to +60°C
• Storage Temperature: -30°C to +70°C
• Dimension: approx.19614659mm
• Weight: approx.576g

Power Supply

• Please install batteries into the device before using.
• Open the battery cover on the back of the device.
• Insert 6 x 1.5V AA batteries into the battery compartment. Make sure the polarity is correct.
• Close the battery cover.

Inserting Memory Card

• Please prepare a Micro SD card(up to 32GB) in advance.
• Open the card slot cover, you will see the card slot.
• Insert the Micro SD card into the slot. Make sure the direction is right. Never insert the card forcibly.
• Format the Micro SD card, this can improve the battery life and shutter speed.
• To remove the card from the memory card slot of the device, press the edge of the memory card gently, and the card will pop out. Then remove the card.

Basic operation

Turn On And Turn Off
Keep pressing the power button for 3 seconds to turn on the device. Keep pressing the power button for 3 seconds again can turn off the device.
Changing The Modes
The night version has 3 different modes: photo mode, video mode, and playback mode Press the Mode button can change the mode.

| Photo Mode| For taking still photos.
---|---|---
| Video Mode| For recording video.
| Playback Mode| For playing the recorded

Taking Still Photos

1. Turn on the device, the default is photo mode. If not, press the Mode button to switch to photo mode.
2. Zooming: Keep pressing the or button to zoom in or zoom out the image. the value of the magnification level appears on the LCD screen.
3. Take a still photo. – View your subject via the LCD screen. – Press the Shot button to take a photo.

Recording Video

1. Turn on the device, and press the Mode button to switch to video mode.

2. Zooming: Keep pressing the or button to zoom in or zoom out the image. The value of the magnification level appears on the LCD screen.

3. Start to record video.
   – View your subject via the LCD screen.
   – Press the Shot button to start to record. The record duration will be shown on the LCD screen.

4. Finish recording.
   – Press the Shot button again to stop recording.
   – The device will stop recording automatically once the capacity of the memory card is full.

Notice:

1. About the manual focus: On the left lens, marked “far” and “near”. If the observation distance is far, please rotate the lens to left. If the distance is near, rotate the lens to right. Users can repeatedly adjust the optimal focal length according to the actual observation distance.
2. There is no sound in the video files. Because the observation distance is far, the sound cannot be transmitted.
3. In photo/video mode, if you have to view the dark environment, please short press the IR UP button to activate the IR LEDs, the image will change to black and white. The IR LEDs have seven levels, short press the IR UP button to up the level, and short press the IR DOWN button to down the level. (If the battery voltage is not enough, the IR LEDs level will down automatically. IR level can up to 7 levels when the battery power is full. LF only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3. If the battery power is lower than 25%, IR LEDs can not be activated. )

Settings in Photo and Video Mode
Pressing the Menu button in photo or video mode can change the settings.

Options:[1M 1280×960]/[VGA 640×480]
Video Size| Set the video resolution. Options:[960 1280×960]/[640 640×480].
Night vision sensitivity| Choose the night vision sensitivity. Options:[Low]/[Middle]/[High].
Power Frequency| Set the light source frequency to match the frequency of electricity supply in the local region to prevent interference. Options:[50Hz]/[60Hz].
Power Save| Set the time to shut down the device for power saving if the device is idle.
Options:[3min]/[5min]/[10min]/[OFF].
Date&Time| Set the date and time of the device.
Date Stamp| Add the date stamp on the photo or video files.
Options:[Off]/[Date]/[Date&Time].
Language| Set OSD (on-screen) language. Options:[English]/[Simplified Chinese/ [Traditional Chinese]/[French]/[Dutch]/ [Spanish]/[1talian]/[Portuguese]/[Germ an]/[Russian]/[Japanese]/[Korean].
Format| Format your TF card. Format TF card will delete all files including the protected files. Please copy the important files before confirming. Options:[Yes]/[No].
Reset All| Restore the setup to factory default settings.Options:[Yes]/[No].
FW Version| Users can see the firmware version information.

Playback

1. Turn on the device, and press the Mode button to switch to playback mode.
2. Press the Up/Down button to view photos and video files.
3. Playback the video – Press the Shot button to start playing the video files.
   – Press the Shot button again to have a pause.
   – Press the Menu button to stop the current video from playing. Press the Menu button in playback mode,the screen will display the playback menu. Press the Up/Down button to scan lock or delete. And press the Shot button to select one to enter the submenu.

Playback menu list :

Options:[Lock/Unlock onel]/[Lock All]/[Unlock All].
Delete| Delete the current file or delete all files in the memory card. Options:[One]/[All].

Download files to PC

There are two ways to download files from the device to a computer:
By inserting the memory card into a card reader.
By connecting the device to a computer using the supplied USB cable.

Using a Card Reader

1. Eject the memory card from the device and insert it into a card reader. Then connect the card reader to a computer.
2. Open [My Computer] or [Windows Explorer] and double-click the removable disk icon that represents the memory card.
3. Copy images from the card into a directory of your choice on the computer’s the hard disk.

Connecting the Device to a PC through the USB Cable

1. Turn on the night vision. Connect it to a computer through the supplied USB cable.
2. When connecting to the computer, it will appear “MSDC” on the screen.
3. Open [My Computer] or [Windows Explorer]. A”Removable Disk” appears in the drive list. Double-click the “Removable Disk” icon to view its contents. Files stored on the camera are located in the folder named “DCIM”.
4. Copy the photos or files to your computer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>