IKEA 005.201.28 TVÄRDRAG Cabinet Lighting Instructions
- October 30, 2023
- Ikea
Table of Contents
IKEA 005.201.28 TVÄRDRAG Cabinet Lighting
IMPORTANT SAFETY INSTRUCTIONS
For indoor use only.
Regularly check the cord, the transformer and all other parts for damage. If
any part is damaged the product should not be used.
Important information! Keep these instructions for future use.
CAUTION!
The light source of this product is nonchargeable light diodes (LED).
Do not disassemble the product, as the light diodes can cause damage to the
eyes.
Do not immerse in water.
Cleaning
Use a damp cloth, never a strong cleaning agent.
- Wipe the surface dry where the tape will be used with a clean and dry cloth.
- The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape.
- Please keep the unused fittings for future use.
CAUTION!
Do not cover. Lamp gets hot, may cause fire.
ATTENTION:
CAUTION:
Injury to persons and damage to the lamp and/or the mounting surface may result if the lamp is pulled from the surface. To reduce the likelihood of such injury or damage, mount only on a surface that is mechanically sound.
Use only IKEA LED drivers suited for this product. The total wattage of the lamps connected to one LED driver must not exceed the maximum power stated on that LED driver and never more than 30W.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock.
WARNING – THIS IS AN ELECTRIC LAMP – NOT A TOY! TO AVOID RISK OF FIRE, BURNS, PERSONAL INJURY AND ELECTRIC SHOCK IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT.
PACKAGE CONTENTS
MX
Importer/Distributor: IKEA Supply Mexico, S.A. de C.V., Calle Oriented 158,
number 440, Floor 3, Local JD-01, Colonia Moctezuma, Second Section, Mayor
Venustiano Carranza, C.P. 15530, Mexico City. Phone 55-8310-8310. Read and
follow all safety and operating instructions before using this product/For
Indoor Use/See Electrical Specifications on product labeling.
ASSEMBLY INSTRUCTIONS
Max 6 units.
LED driver and power supply cord are sold separately
