UNHCR SunBell Smart Y Solar Lamp Instruction Manual

UNHCR SunBell Smart Y Solar Lamp

Product Information

• The product is a device that helps to perform a specific task.
• The device has a unique design and is made of durable materials.
• The device has multiple features that aid in performing the task efficiently.
• The device can be used both indoors and outdoors.
• The device comes with a user manual that provides detailed instructions on how to use the device.

Product Usage Instructions

1. Before using the device, read the user manual carefully and understand the instructions provided.
2. Make sure that the device is fully charged or has fresh batteries before use.
3. Turn on the device by pressing the power button.
4. Familiarize yourself with the different features of the device and how they work.
5. Follow the instructions provided in the user manual to perform the desired task using the device.
6. After using the device, turn it off and store it in a safe place.
7. Clean the device regularly to prevent dirt and debris from accumulating on it.
8. If you encounter any issues while using the device, refer to the troubleshooting section in the user manual or contact customer support for assistance.

Overview

• 8 different products in one
• Upto 130 hours of light in one charge on low setting
• 90 lumen of light and 4 light modes
• Charges your phone
• Dust and splash proof (IP64)
• Life span of 5-7 years of daily use

1. Hanging light
2. Flexible torch
3. Task light
4. Emergency strobe light
5. Hands-free light
6. Lantern
7. Mobile charging
8. Reading light

Solar Energy

The solar panel must face the sun to create electricity.
Under a clear sky in bright sunshine the lamp will charge faster. The SunBell will be fully charged within a sunny day.

Under cloudy conditions the lamp will charge slowly.

The lamp cannot charge at night after the sun has set. The solar panel should be disconnected at night.

Enjoy at night
At night you can enjoy the light from your solar lamp after charging it in the daytime.

Unpack the product

• Remove the solar panel from the lamp shade using the plastic tabs.
• LED light, battery pack and control unit.

Assembly

• Insert the battery unit.
• Insert the battery and light head
• Hang SunBell from a hook or over a cable
• Insert the battery unit into the solar base flip lid
• Place the lamp and battery around your neck
• Make the lamp shade into a speaker

8 Key Features

Use your SunBell Smart in 8 different ways

1. Hanging light
2. Flexible torch
3. Task light
4. Emergency strobe light
5. Hands-free light
6.  Lantern
7. Mobile charging
8. Reading light

Light Modes

ON/OFF button for the 4 lamp modes

Light modes

1. click: Low setting
2. click: Medium setting
3. click: High setting
   Fast double click:
   Emergency strobe light

Full battery run time

**Solar run time***

Solar Panel

Un-roll solar cable from under the solar panel

1. Take the solar panel
2. On the back of the solar panel place thumbs on the small indents and forefingers under the arrows.
3. Pull up with the index fingers to lift up the Flip Lid.
4. Unroll the 4m solar cable inside the Flip Lid.
5. Attach the solar panel to the battery unit using the connector marked with a sun.
6. After attaching the solar panel to the battery unit, place the solar panel in the sun to start charging

Solar Charging

Charge indication

Low battery

Flashing green

Battery charged

Steady green

Battery

Indications

Low battery
Flashing red

When the battery is low, the main light will flash 3 times and then automatically decrease to the low light setting. You will then get 30 minutes of light.

Battery completely discharged
Steady red

You will have 30 seconds of emergency light each time the on/off button is pressed.

Phone Charging

• a. If you are charging a cellular phone (not smart phone), you can use the phone charging cable that comes with the lamp. Plug the cable in the entrance marked with a lightening bolt.
• b. If you are charging a smart phone, connect an appropriate cable in the USB entrance with your phone.
• c. Charge the telephone. Ensure that the battery in your SunBell is well charged (steady green light) before recharging your phone. The phone will not charge if the battery is low.
  Note that charging a phone will decrease the number of hours of light available.

Optimisation

To optimize use of the SunBell Smart, charge your phone when the battery is fully charged (LED indicator steady green) and the solar panel is still connected and in the sun.

To optimize use of the SunBell Smart, charge your phone when the battery is fully charged (LED indicator steady green) and the solar panel is still connected and in the sun.

SunBell Smart will charge almost all mobile phones but charging smart phones will drain the battery at a much faster speed.

Safe and Efficient Use

Keep the lamp inside when it rains. Place the solar panel facing the sun .

Do not leave the lamp in the rain. Check that the solar panel is not in the shade.

Maintenance

Take care of the lamp & solar panel

• Place solar panel in the direction of the sun.
  In case of rain, position the cable so that water can drip off and drain away before it reaches the battery unit.

• Clean clean the solar panel regularly with a soft cloth. Any dust and dirt with slow solar charge time. Do not use any chemicals!

• Connectors must be protected when the cables are not connected. This will prevent dust and moisture from getting inside the connector.

Important information regarding your solar product

• Do not open the battery or light unit Please do not remove the battery from the product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>