ABBA LIGHTING CRG30-RGB RGB Brick Light Instruction Manual

October 30, 2023
ABBA LIGHTING

ABBA-logo

CRG30-RGB RGB Brick Light

ABBA-LIGHTING-CRG30-RGB-RGB-Brick-Light-product

Product Information

  • Product Name: CRG 30 RGB
  • Product Type: LED Brick
  • Dimensions: 100mm x 100mm x 46mm
  • Weight: 0.7kg
  • Input Voltage: DC12V
  • Power Consumption: 1.3W
  • IP Rating: IP66
  • Manufacturer Website: www.ABBAlightingUSA.com

Product Usage Instructions

  1. Dig an embedded well and prepare cables according to the dimension provided in the user manual.
  2. Put the recessed box in the embedded well.
  3. Place the LED brick in the recessed box.
  4. Connect the wires as follows: Brown wire to 12V+, Blue wire to 12V-, Red wire to A+, White wire to B, Yellow wire to GND, and Green wire to TI.
  5. Seal the recessed box with neutral silicone sealant.
  6. If using multiple LED bricks, connect them in series using the same wiring method as step 4.
  7. After installation, ensure that the lamp is 12mm higher than the recessed box top edge.
  8. Note that the product is waterproof (IP66) and can be used outdoors, but it should not be immersed in water for a long period of time. An IP66 waterproof conjunction box needs to be purchased separately for this purpose.

Dimensions

ABBA-LIGHTING-CRG30-RGB-RGB-Brick-Light-fig-1

Installation

ABBA-LIGHTING-CRG30-RGB-RGB-Brick-Light-fig-2 ABBA-LIGHTING-CRG30-RGB-RGB-Brick-Light-fig-3 ABBA-LIGHTING-CRG30-RGB-RGB-Brick-Light-fig-4

WARNING

  1. The luminaire should be installed and maintained by qualified electrician and wired in accordance with the latest IEE electrical regulations or the national regulations. Terminal block not included. Installation may require advice
  2. The power must be OFF during installation and maintenance.
  3. The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.
  4. The light source of this luminaire can not be exchanged; if the user needs to exchange the light source (e.g. the light source is at the end of its life cycle), then the completed luminaire has to be exchanged.
  5. Installation: Recessed mounted. Outdoor use.
  6. Make sure the products are securely installed.
  7. The housing might become hot during or after operations. No modification on the product is allowed
  8. Immersed in water for long time is forbidden
  9. IP66 waterproof conjunction box need to purchase separately.

INSTRUCTION

  1. Order all power supplies / cables / connectors separately.
  2. Regular check and cleaning are required.

www.ABBAlightingUSA.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

ABBA LIGHTING User Manuals

Related Manuals