ABBA LIGHTING DM52 Stainless Steel Well Light Installation Guide
- October 30, 2023
- ABBA LIGHTING
Table of Contents
LIGHTING USA
12 V Landscape Light Specialist
WITH CASING DM52
INSTALLATION GUIDE
RATED VOLTAGE 12 AC/DC
Thank you for purchasing this quality product. To ensure correct function and
safety, Please read and follow all instructions carefully before assembly,
installation and before using this product.
IMPORTANT SAFETY INSTRUNCTIONS
LIGHTEN LAMP IS HOT!
WARNING: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS:
| Lamp gets HOT quickly!
---|---
| Do not touch HOT lens, guard or enclosure.
| Keep lamp away from materials that may burn.
| Do not touch the lamp any time. Use soft cloth.
| It is recommended only qualified persons to install this electrical product.
| Before attempting to install this unit, ensure all power connections are off
for your own safety.
WARRANTY
- This fixture is covered by a 2 year warranty. The warranty is from the date of purchase, not the date of installation.
- Please keep the proof of purchase Warranty will be void if there is any damage due to improper usage or modification to the fixture.
- Failure to comply with the instruction in this manual may increase the risk of damage or injury and will void warranty.
CAUTION: fixture(s) must be installed in accordance with all local codes and ordinances. Do not instal within 10 feet of a pool, spa or fountain
INSTALLATION INSTRUCTION
Fixture(s) should be used “ONLY” with low voltage landscape power units that
do not exceed 25A, 15V.
The main cable from power units should be buried for less than 6 inches under
the ground level.
- Please ensure the light cable wires input are 12v ac/dc.
- Turn off power before installation.
- Attach the fixture(s) wires to the main cable connector suitable for direct burial and use waterproof wire nuts. WN12 (Sold separately).
- Put the FIXTURE into the ground. Try to make firm vertical mounting.
- Turn on the power.
INSTALLATION ON CONCRETE
INSTALLATION ON SOIL
