BOSCH B06019K1021 Pro Pruner Battery Scissors Instruction Manual

BOSCH B06019K1021 Pro Pruner Battery Scissors

Product Information

• Manufacturer: Robert Bosch Power Tools GmbH
• Address: 70538 Stuttgart, GERMANY
• Website: www.bosch-pt.com
• Model Number: 1 609 92A 5R5
• Date of Manual: 10.07.2020

Product Features

• Professional grade pruning tool
• Corded electric power tool
• Designed to be used for cutting and pruning branches and vines

Safety Instructions

General Power Tool Safety Warnings:
The term power tool in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

• Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
• Failure to follow all instructions may result in electric shock, fire and/or serious injury.
• Keep all warnings and instructions for future reference.

Work Area Safety:

• Keep work area clean and well-lit.
• Do not operate power tools in explosive atmospheres.
• Keep children and bystanders away while operating a power tool.

Electrical Safety:

• Power tool plugs must match the outlet.
• Avoid body contact with earthed or grounded surfaces.
• Do not expose power tools to rain or wet conditions.
• Do not abuse the cord.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.

Personal Safety:

• Stay alert and use common sense when operating a power tool.
• Use personal protective equipment, such as eye protection, dust mask, non-skid safety shoes, hard hat or hearing protection.

Product Usage Instructions

• Ensure that the work area is clean and well-lit.
• Do not operate the Pro Pruner Professional in explosive atmospheres.
• Keep children and bystanders away while operating the tool.
• Ensure that the power tool plugs match the outlet.
• Avoid body contact with earthed or grounded surfaces.
• Do not expose the Pro Pruner Professional to rain or wet conditions.
• Do not abuse the cord.
• Ensure that an extension cord suitable for outdoor use is used when operating the tool outdoors.
• When operating the tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
• Stay alert and use common sense when operating the tool.
• Use personal protective equipment, such as eye protection, dust mask, non-skid safety shoes, hard hat or hearing protection.

Safety Instructions

General Power Tool Safety Warnings

WARNING
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations. Battery tool use and care
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another\ battery pack.
• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Safety Warnings for Cordless Secateurs

• This tool is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
  use of the tool by a person responsible for their safety. Children should be supervised to ensure that they do not play with the tool.

• Minors should never be allowed to operate the tool; it should never be left unattended and when not in use should be stored in a locked place out of the reach of children.

• Don’t use the tool or perform battery charging operations in the rain.

• Don’t leave the tool in rain or wet locations.

• Keep bystanders well away from your work area.

• Be careful not to catch foreign matter between the blades. Remove the foreign matter from the blades.

• Take care, avoid cutting electrical wires that may be hidden.

• Keep your free hand away from the cutting area. Never touch the blades. They are very sharp and you may cut yourself.

• Be vigilant when operating to ensure that the fingers on the hand used to hold or move branches to be pruned are not exposed to the cutting blade.

• Always check the blades carefully before operation.

• Handle the blades with extreme care to prevent cuts or injury from the blades.

• Always wear protective gloves when using, adjusting or cleaning the tool Keep hands away from blade.

• In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.

• Do not open the battery. There is a risk of short-circuiting.

• The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.

• Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.

• Protect the battery against heat, e.g. against continuous intense sunlight, fire, dirt, water and moisture. There is a risk of explosion and short-circuiting.

Product Description and Specifications

Read all the safety and general instructions.
Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury. Please observe the illustrations at the beginning of this operating manual.

Intended Use
The tool is intended for professional use in pruning branches and plants with a diameter up to 25 mm.

Product Features

The numbering of the product features refers to the diagram of the power tool on the graphics.

1. Cutting knife
2. Warning LED
3. Status LED
4. Socket for attaching the Bosch special protective glovesA)
5. Rechargeable battery
6. Battery release button
7. On/off switch
8. Battery charge indicator
9. Cutting switch
10. Blade
11. Handle (insulated gripping surface)
12. Blade lock nut
13. Screw for adjusting the distance between the cutting knife and blade
14. Oil filler opening
    • The protective glove function is available for special designs.

The accessories illustrated or described are not included in standard delivery. A complete overview of accessories can be found in our accessories program.

Technical Data

• A) Measured at 20−25 °C with rechargeable battery GBA 12V 3.0Ah.
• B) Depends on the battery in use
• C) Limited performance at temperatures <0 °C

Assembly

Remove the battery from the power tool before carrying out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be removed for transport and storage. There is risk of injury from unintentionally pressing the on/off switch.

Removing the Battery (see Figure A)

• Use only the chargers listed in the technical data. Only these chargers are matched to the lithium-ion battery of your power tool.

Note:
The battery is supplied partially charged. To ensure full battery capacity, fully charge the battery in the charger before using your power tool for the first time.

The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging process does not damage the battery. The lithium-ion battery is protected against deep discharge by the “Electronic Cell Protection (ECP)”. When the battery is discharged, the power tool is switched off by means of a protective circuit: The application tool no longer rotates.

• Do not continue to press the On/Off switch after the power tool has automatically switched off. The battery can be damaged.

To remove the battery (5), press both release buttons (6) and pull the battery downwards out of the power tool. Do not use force to do this. Follow the instructions on correct disposal.

Battery Charge Indicator

If no LED lights up after pressing the button (7), then the battery is defective and must be replaced.

Status LED indicator

Warning LED indicator

will re-turn to the open position automatically.
The indicator is lit red continuously| The temperature of the battery, motor and electronic module is too high.

Audio signal

Operation

Starting Operation

Inserting the battery

Note:
The use of batteries unsuitable for your power tool can lead to malfunctions or damage to the power tool. Push the charged battery (5) into the handle until it clicks into place.

Switch on (sleep mode)
Press the on/off switch (7) to switch the tool on. The battery charge indicator (8) will light up and the status LED (3) will flash. The cutting knife (1) and the blade (10) do not move. An audio signal sounds once.

Activate knife (ready to cut)
Press the cutting switch (9) twice in quick succession. The cutting knife (1) moves to its home position. The status LED (3) switches from flashing to being lit continuously. An audio signal sounds twice.

Cutting
To begin cutting, press the cutting switch (9) until the cut has been completed. Release the cutting switch (9) again. The cutting knife (1) will return to its home position.

Deactivating the blade
Press and hold the cutting switch (9) for 4 seconds. The cut-ting knife (1) will move into the closed position and lock. An audio signal sounds once. The status LED (3) flashes. The power tool will go into sleep mode; one minute later it will switch itself off.

Switching Off
Press the on/off switch (7) to switch the tool off. The battery charge indicator (8) and the status LED (3) go out.

Tips for cutting wood
Never use the tool in an awkward posture. This can lead to serious injuries. Keep your free hand well away from the cutting area. Do not touch the blades. They are very sharp and you may cut yourself.

Troubleshooting

(1) will return to the open position automatically.
Warning LED (2) lights up red continuously| The temperature of the battery, motor and electronic module is too high| Allow the battery, motor and electronic module to cool down.
Cutting knife (1) does not move after the cutting switch (9) has been pressed| Battery (5) is too weak| Charge the battery (5).
 On/off switch (7) has not been pressed  Power tool is still in sleep mode| Press the on/off switch (7).

Press the cutting switch (9) twice (ready to cut).

Cutting switch (9) is defective

Hall effect sensor

| Do not continue to work, contact customer service.
Cutting blade (1) is jammed in the branch| Branch too thick| Release the cutting switch (9). Press the on/off switch (7) or remove the battery

(5) , then pull the cutting knife (1) out of the branch slowly and in a straight line.

Maintenance and Service

Maintenance and Cleaning

• Remove the battery from the power tool before carry-ing out work on the power tool (e.g. maintenance, changing tool, etc.). The battery should also be re-moved for transport and storage. There is risk of injury from unintentionally pressing the on/off switch.

Adjust the distance between the cutting knife and blade
Always remove the battery before adjusting the distance. After a while, when the distance between the cutting knife (1) and the blade (10) is no longer optimal, you can re-ad-just the distance:

• Loosen the screw (13).
• Turn the lock nut (12) in the required direction.
• Retighten the screw (13).

Knife lubrication
Remove the battery before refilling with oil. In order to achieve optimal cutting performance, pour a small amount of oil into the oil filler opening (14) to lubricate the cutting knife. The frequency with which you refill the oil depends the frequency with which you cut, and the diameter and hardness of the branches.

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning the maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.

In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6 46200 Petaling Jaya Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my

You can find further service addresses at:
www.bosch-pt.com/serviceaddresses.

Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable for road transport by the user without further restrictions. When shipping by third parties (e.g.: by air transport or forwarding agency), special requirements on packaging and labeling must be observed. For the preparation of the item being shipped, consulting an expert for hazardous material is required.

Dispatch battery packs only when the housing is undamaged. Tape or mask off open contacts and pack up the bat-tery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more detailed national regulations.

Disposal

• Power tools, rechargeable batteries, accessories and packaging should be sorted for environmental-friendly recycling.
• Do not dispose of power tools and batteries/rechargeable batteries into household waste!

Battery packs/batteries:

Li-ion:
Please observe the notes in the section on transport.

Licenses

Copyright © 2015, Infineon Technologies AG
All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions, and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the copyright holders nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

References

• Invented for life | Bosch Global
• Location selection | Bosch Power Tools
• 首页
• Bosch Power Tools | Bosch Power Tools
• Bosch Power Tools | Bosch Power Tools
• Service worldwide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>