OVERLAND CARTS 970202 Electric Powered Carts Owner’s Manual
- October 30, 2023
- OVERLAND CARTS
Table of Contents
OVERLAND CARTS 970202 Electric Powered Carts
OverlandCarts.com Electric Powered Carts Owner’s Manual
Revised: MAR 2023
HOG HAULER CART Part No: 70220 970202
Contents
- 1 year warranty terms
- Cart features
- Frequently asked questions
Warranty
The warranty starts from the delivery date of the cart. This remedy is the sole remedy in contact, tort or otherwise, and Granite Industries is not liable for incidental, consequential or special damages. These warranties give you specific legal rights, and you may have other rights which vary from state to state. Should you have any questions, contact Granite Industries at 877-447-2648. (Proof of purchase may be required).
To view more products from Overland Carts scan the QR code with your phone or visit OverlandCarts.com. Overland Carts are covered by one or more of the following patents: US D752,834 S US D752,835 S US D752,836 S US D752,837 S US D752,838 S US D752,307 S US D752,308 S US D779,762 S US D779,765 S US D781,020 S. Overland carts are a part of the Granite Industries family. All carts are manufactured by Granite Industries in Archbold, Ohio.
Customer Service: 877-447-2648 M-F, 8am – 5pm EST
Cart Features
Our carts come fully assembled All Overland Carts come fully assembled, charged and ready to use. All you have to do is power the cart on and drive away. (We do recommend charging overnight after receiving.) Crate Disassembly Instructions: We recommendusing a drill or an electric screwdriver with a #2 Phillips bit or a #2 square bit to remove the screws. We recommend using a hammer or crowbar to remove the portions that are nailed down. Immediately stop the progress of the cart.
They’ve been tested (again and again) The standard 24 amp-hr rechargeable battery packs have been extensively tested. We areconfident to rate the batteries with a 6-8 hour real world capacity.
Satisfaction Guaranteed Granite Industries is committed to making sure each Overland Cart meets your expectations. To ensure customer satisfaction, we offer a 15-day money-back guarantee. Use the cart and see how much easier the cart makes your projects. If you’re not satisfied, simply contact Granite Industries at877-447-2648 for a return authorization and details. Orders and quote requests can be emailed to support@graniteind.com or faxed to 419-445-3304.
Frequently Asked Questions
-
How long do the batteries last on a single charge? It is completely dependent upon how much weight is being carried, the type of terrain, and the softness or hardness of the surface. We estimate a range of 6-8 hours of real-world use.
PLEASE NOTE: Most use is not as intense as our real-world estimates, so actual use time is typically much longer. Visit YouTube.com/OverlandCarts to view videos of our product testing. -
When and how long should I charge my cart?
Charge your cart immediately after using. If, during operation, the battery indicator light goes to red, it is time to recharge. It is recommended to leave the cart on the charger overnight to extend the life of the batteries. -
How long will the batteries last before needing to be replaced? The batteries are designed to last for 300-500 charge/discharge cycles, which translate into approximately 1-2 years. The batteries are common and can be purchased from Granite, your local battery supplier, or on Amazon.
Contact Information
For further inquiries, please contact Granite Industries Customer Service at 877-447-2648, Monday to Friday, 8 am – 5 pm EST.
Usage Instructions
- Unpack the cart and check if all parts are complete and undamaged.
- Charge the cart overnight upon receiving it.
- Power the cart on and drive it away.
- Charge the cart immediately after using. If the battery indicator light goes to red during operation, it is time to recharge.
- If you need to disassemble the crate, use a drill or an electric screwdriver with a #2 Phillips bit or a #2 square bit to remove the screws. Use a hammer or crowbar to remove the portions that are nailed down.
- Stop the progress of the cart immediately if necessary.
- If you are not satisfied with the cart’s performance, contact Granite Industries at 877-447-2648 for a return authorization and details within 15 days of purchase.
1 YEAR WARRANTY
- Electronics: Includes controller, s-drive, and wiring
- Powertrain: Includes transaxle containing the motor and differential
- Wheels, Casters & Tires
- Batteries & Charger
- Hoppers: Includes Brentwood hopper, and white garden hopper
- Chassis: Includes steel frame and powder coating
TERMS
Warranty starts from the delivery date of the cart.
We will repair, without charge, any defect due to faulty material or
workmanship. These warranties do not cover failures due to abuse, misuse,
improper installation, accidental damage or when repairs or modifications have
been made or attempted to be made by anyone other than Granite Industries. Any
defective products that meet warranty specifications and Granite Industries
approval, may be returned to the factory to be repaired or replaced free of
charge. (Granite Industries will pay to ship replacement item(s) to the
customer; however the customer is responsible for shipment of products to the
factory.)
This remedy is the sole remedy in contact, tort or otherwise, and Granite
Industries is not liable for incidental, consequential or special damages.
These warranties give you specific legal rights, and you may have other rights
which vary from state to state.
Should you have any questions, contact Granite Industries at 877-447-2648.
(Proof of purchase may be required).
Overland Carts are covered by one or more of the following patents:
US D752,834 S
US D752,835 S
US D752,836 S
US D752,837 S
US D752,838 S
US D752,307 S
US D752,308 S
US D779,762 S
US D779,765 S
US D781,020 S
Overland carts are a part of the Granite Industries family. All carts are manufactured by Granite Industries in Archbold, Ohio.
CART FEATURES
Built with you in mind
Our carts come fully assembled
All Overland Carts come fully assembled, charged and ready to use. All you
have to do is power the cart on and drive away. (We do recommend charging
overnight after receiving.)
Crate Disassembly Instructions:
We recommend using a drill or an electric screwdriver with a #2 Phillips bit
or a #2 square bit to remove the screws.
We recommend using a hammer or crowbar to remove the portions that are nailed
down.
We designed our carts to be simple to operate:
- To turn on, pull the red On/Off switch out towards you.
- Toggle the black switch for forward and reverse.
- Grasp and twist the throttle.
- To turn the cart off, simply push the red button in.
Safety Features
- Emergency Stop – The red E-Stop button allows the user to immediately stop the progress of the cart.
- AutoLock – Automatically locks the wheels when the throttle is not being applied. This feature prevents the cart from rolling away from the user and also provides easy loading and unloading on inclines.
- HillSense – Allows the cart to be used safely on inclines and declines. The cart will travel at the speed set by the user, not by the incline or decline.
- SmoothStart – On acceleration, power is applied to the drive tires in a controlled manner ensuring a smooth start each time.
- Four Wheel Design – All Overland Carts have at least four wheels to provide maximum stability.
They’ve been tested (again and again)
The standard 24 amp-hr rechargeable battery packs have been extensively
tested. We are confident to rate the batteries with a 6-8 hour real world
capacity.
Satisfaction Guaranteed
Granite Industries is committed to making sure each Overland Cart meets your
expectations. To ensure customer satisfaction, we offer a 15 day money back
guarantee. Use the cart and see how much easier the cart makes your projects.
If you’re not satisfied, simply contact Granite Industries at 877-447-2648 for
a return authorization and details.
Orders and quote requests can be emailed to
support@graniteind.com or faxed to
419-445-3304
FREQUENTLY ASKED QUESTIONS
How long do the batteries last on a single charge?
It is completely dependent upon how much weight is being carried, the type of
terrain, and the softness or hardness of the surface. We estimate a range of
6-8 hours of “real world” use. PLEASE NOTE: Most use is not as intense as our
“real world” estimates, so actual use time is typically much longer. Visit
YouTube.com/OverlandCarts to view videos of our product testing.
When and how long should I charge my cart?
Charge your cart immediately after using. If, during operation, the battery
indicator light goes to red, it is time to recharge. It is recommended to
leave the cart on the charger overnight to extend the life of the batteries.
How long will the batteries last before needing to be replaced?
The batteries are designed to last for 300-500 charge/discharge cycles, which
translate into approximately 1-2 years. The batteries are common, and can be
purchased from Granite, your local battery supplier, or on Amazon.
Will tipping the unit hurt the batteries, electronics, or drive system?
No. Batteries, electronics, and drives can operate in any orientation.
What is the maximum speed?
All Overland Carts operate from 0 to 3.5 miles per hour in both forward and
reverse.
While pushing my cart in manual/freewheel mode, it suddenly decelerates
aggressively. What causes this?
There is a safety feature on your Overland Cart that is designed to prevent
the cart from running away when the brake is manually disengaged.
How much weight can my cart handle?
750 lbs is the maximum load for level ground.
Why does my cart lose traction when one wheel is off the ground?
The drive system is an open differential that allows the machine to
efficiently make turns without skidding the tires. The drawback is that if one
of the drive tires leaves the ground, it will simply spin until all tires are
back on the ground.
Is a balanced load important to the performance?
Yes. Balancing the load so that it is not top-heavy or side-loaded, will allow
much safer operation. Furthermore, most of the load should be located over top
of the drive wheels for better traction.
How do I clean my Overland Cart?
Simply remove all debris, hose it down with soapy water, and towel dry. We do
not recommend using a pressure washer.
Can I use my Overland Cart in cold temperatures?
You certainly can, but we recommend that you charge and store the batteries at
room temperature.
What maintenance is required?
Not much, really! Simply remember to always recharge when not in use – it’s
okay to leave the cart on the charger. The drive system is sealed for life,
thus no lubrication is required. Also, keep the unit dry to enhance its life
and appearance.
How should I store my cart?
We recommend keeping your cart indoors, out of the rain and other elements.
For long-term, or “off season” storage, give the battery an overnight charge,
then disconnect the battery pack from the cart and store it indoors at room
temperature. Every 3-4 months, fully charge the battery even though it’s not
in use. This helps to prolong the life of the batteries.
Where is the serial number?
Every Overland Cart comes with its own serial number. This is located on the
front side of the upper control box. You will need this number when you fill
out your warranty card.
How do I identify the right and left tires?
Our ag tires have a specific tread pattern and if you ever need to replace a
tire, you need to identify them as right or left. To do so, stand in front of
your cart, so you are looking at the hopper. The left tire will be on your
left side.
CHARGING INFORMATION
CHARGE YOUR CART
When your cart arrives, please plug it in and make sure the battery is fully
charged. There is a battery charge display on the side of the battery pack.
The charger can be left connected to the batteries after a full charge (green
light) without harming the batteries. It uses a three stage charging system to
optimize battery longevity. The charger uses minimum power in standby mode and
maintains the batteries at full charge.
For the best battery life, charge the cart after each use or at the end of the
work day. It’s preferable to let the batteries charge overnight by plugging
the cart into a 110V outlet.
Capacity
|
Single 12V AGM Battery
| 24V AGM Battery Pack
(Two 12V Batter- ies in series)
---|---|---
100% Floating Charge (when plugged in)| 13.00V+| 26.00V+
100%| 13.00V| 26.00V
90%| 12.75V| 25.50V
80%| 12.50V| 25.00V
70%| 12.30V| 24.60V
60%| 12.15V| 24.30V
50%| 12.05V| 24.10V
40%
Recharge Batteries
| 11.95V| 23.90V
30%| 11.81V| 23.62V
20%| 11.66V| 23.32V
10%| 11.51V| 23.02V
0%| 10.5V| 21.00V
1%| 10.80V| 21.60V
0%| 9.50V| 19.00V
BATTERY CAUTIONS AND WARNINGS
- Before using the battery charger, read all instructions and cautionary markings on the battery charger, batteries and the product using the batteries.
- Only use the type of batteries that the charger is specified for. Other types of batteries may burst, causing personal injury or damage.
- Do not expose charger to rain or snow.
- Do not cover the charger or charge battery in an airtight enclosure. Ventilation is important to prevent overheating.
- Make sure extension cord is not used unless absolutely necessary. Use of improper extension cord could result in risk of fire and electric shock. If extension cord must be used, make sure:
- The pins on the plug of the extension cord are the same number, size and shape as those on the charger.(3 prong with ground)
- The extension cord is properly wired and in good electrical condition. A 16 ga cord or heavier duty extension cord is recommended.
- Do not operate a charger that has been dropped, damaged or has a damaged cord or plug – replace immediately if there are signs of damage!
- Do not disassemble the charger.
OPERATING INSTRUCTIONS
SAFETY INFORMATION
- Flat free semi pneumatic tires are not pressurized and do not have a valve stem.
- Only use chargers and batteries issued by Overland Carts. Use of third party batteries or chargers may cause harm to the user and the cart.
- Always make sure the attachments are latched securely before operating the cart.
- Always make sure the load is distributed evenly and the cart is stable before operating.
- Push in the red E-Stop whenever the cart is sitting still or whenever the batteries are charging.
- Do not exceed the rated capacity of 750 pounds for the cart on flat surfaces.
- Exercise caution when operating on inclines or declines.
- Do not drive the cart over sudden drops such as curbs, steps, or ledges. We recommend using ramps to navigate uneven surfaces.
- The metal battery pack can be opened to reveal the batteries; however, the physical batteries should never be opened. They are sealed lead acid batteries and cannot be resealed. Do not attempt to add more battery acid or water. If the batteries need replaced, please purchase new batteries.
BEST PRACTICES
- Hand wash your Overland Cart with soapy water. Never use a pressure washer.
- Do not drive your cart through deep puddles of water and do not submerge the drive system or battery box.
- The drive system is lubricated for life, so no maintenance is required.
- When the battery indicator light goes to red, it is time to recharge.
- Recharge cart immediately after using.
POWER YOUR CART ON
To power your cart on, pull the red E-stop button out. You will notice the
battery indicator lights light up, and your cart is ready for operation.
If the Overland Cart sits inactive for 20 minutes while on, it will go to
sleep in order to conserve power. To wake the cart up, push the E-Stop button
in, and pull it back out to power your cart on again.
DRIVING YOUR CART
Once your cart is on, make sure your forward/reverse button is toggled upwards
for forward. Twist the throttle towards you and the cart will begin moving
forward. While driving your Overland Cart forward, stay directly behind the
cart with both hands on the handles. When operating the cart in reverse, do
NOT stand in the path of the cart and walk backwards. Instead, turn around and
stand beside the unit to prevent accidental injury.
SLOPES AND INCLINES
When going downhill, operate your cart in reverse, leading the cart downhill
with the handles first. This will prevent your cart from tipping over,
especially if it is carrying a full load. Do not drive your cart across an
incline, this may cause the cart to roll over on it’s side. Always travel
parallel with the slope or incline.
FREE WHEEL MODE
The drive system is equipped with a lever that overrides the electromechanical
brake for manually operating your Overland Cart. The brake lever allows you to
override the electric brake when you need to push the cart manually, when loss
of power had occurred. With the brake in the disengaged position, the E-Stop
button must be pushed in, and the power turned off, or the drive system will
not move freely. The controller will NOT operate the motor when the brake is
disengaged.
When lever is in the down position the brake is engaged, and when up it is
disengaged. When you reset the brake system the unit will not operate until
you toggle the power button off and back on, this process will need to be
repeated every time the brake in manually disengaged.
TROUBLESHOOTING
| Issue | Possible Problem | Solution |
|---|
Cart will not run
| Batteries are dead| Charge the Overland Cart
E-Stop is in the OFF position| Pull e-stop out, to the ON position
Unit is in sleep mode| Cycle the unit OFF for a couple seconds, then back ON
Cart is in freewheel mode (brake is disengaged)| Re-engage motor brake (see
free wheel mode section)
Electrical malfunction| Disconnect and connect all electrical connections, and
make sure they are all secure
Moisture issue| Let dry, avoid getting the s-drive and battery
box wet
Cart shuts off during use
| Circuit breaker has tripped| Push the reset button on the battery pack (see
diagram below).
Thermal overload (weight, climb angle, or terrain may have exceeded transaxle
capacity)| Release throttle, allow transaxle to cool down at least 30 seconds.
Unload some weight, cycle power switch and operate machine again. Reset button
will likely need to be pushed.
Cart suddenly stops
| Broken or loose motor wire or connector| Check motor wires and brake wires
to make sure none are broken, and also check connector to make sure wires are
secure
Cart abruptly slows down while in freewheel mode| Safety feature has triggered
preventing the cart from rolling away| Push the cart slower while in freewheel
mode
Batteries are not lasting as long as desired
| Cold batteries| Keep batteries warm
Batteries not fully charged| Make sure your cart is fully charged before using
Batteries are damaged or too old| Replace your batteries
Loose wire connections| Check all connections to make sure everything
is secure
Charger light goes directly to green when charging, but battery is not
charged| The battery and/or charger may have gone bad| Test the charger on
another battery if possible. Replace battery and/or charger
The connections may have come loose, or disconnected| Check charger and
battery connections
BATTERY INFORMATION
IMPORTANT RECOMMENDATIONS
- It is recommended to wear insulated gloves when handling batteries.
- If equipment is to be stored for a long period of time, the batteries should be disconnected to avoid undue drain.
- When replacing your batteries, fasten them tightly, but do not apply undue force to the terminals, or bend them.
- Do not place batteries in close proximity to objects which can produce sparks of flames.
- Avoid exposing batteries to heat.
- Do not mix batteries with different capacities, different ages or different makes.
- For best results and generally acceptable performance and longevity, keep operating temperature range between 5º F (-15º C) and 122º F (50º C)
- It is good practice to ensure that the connections are re-torqued and the batteries are cleaned periodically.
- Do not attempt to disassemble batteries. Contact with sulfuric acid may cause harm. If it should occur, wash skin and clothing with liberal amounts of water.
- Batteries should not be stored in a discharged state or at elevated temperatures.
- Please recycle old batteries. Do not throw them away, or attempt to burn them. Attempting to burn batteries (new or old) may cause them rupture or explode.
BATTERY FEATURES
- Absorbent Glass Mat (AGM) technology for superior performance.
- AGM design ensures the acid inside the battery is spill-proof
- Vibration resistant
- Better performance in cold temperatures
- Faster charging
- Longer expected life
- Valve regulated, spill proof construction allows safe operation in any position. However upside down is not recommended.
- Maintenance free design. There is no need to add electrolyte, as gases generated during the charge phase are recombined in a unique oxygen cycle.
- Power/volume ratio yielding unrivaled energy density.
- Special separators, advanced plate composition and a carefully balanced electrolyte system ensure the battery has the ability to recover from an excessively deep discharge.
- All batteries feature a series of low pressure, one-way relief valves. These valves safety release any excessive accumulation of gas inside the battery and then reseal themselves.
- Batteries may be discharged over a temperature range of 5º F (-15º C) and 122º F (50º C), and charged at temperatures ranging from -5º F (-15º C) and 104º F (40º C). For best results we recommend charging the batteries at room temperature.
- The case materials impart great resistance to shock, vibration, chemicals and heat.
- U.L. recognized under file number MH 14533.
- ISO 9001/14001/18001 Certified
WINCH BATTERY REPLACEMENT (12v, 24 amp)
Reconnect the wires to the battery as shown below.
Place the battery, charger and wires back into the box.
Secure the lid in place with the 4 screws and washers you removed in step 3.
DRIVETRAIN BATTERY REPLACEMENT (24v, 24 amp)
PARTS LIST
| Part No | Description | Weight | Dimensions |
|---|---|---|---|
| PI-08-0053 | Throttle Kit | 8 oz | 4′ cord |
| PI-08-0145 | Forward/Reverse Switch | 1 oz | 1.75″H x 2″W x 1″W |
| PI-08-0075 | E-Stop Switch | 2 oz | 1.5″H x 3″W x 1.5″D |
| PI-08-0146 | 24V 600W Transaxle | 16 lb | 7″H x 5″W x 23″D |
| PI-11-0191 | 24V 5A AGM Charger | 2 lb | 10′ Cord |
| PI-11-0173 | 12V 3AH AGM Battery Charger for Winch | 2 lb | 10′ cord |
| PI-11-0189 | S Drive 90 | 1 lb | 1.5″H x 5″L x 3″D |
| PI-06-0182 | 13” Left Flat Free Single Ag Tire – 3/4″ Black Hub* | 30 lb | 13″ |
Diameter – 8″W
PI-06-0183| 13” Right Flat Free Single Ag Tire – 3/4″ Black Hub*| 30 lb| 13″
Diameter – 8″W
PI-06-0055| Rear Swivel Caster with 10″ Flat Free Tire| 10 lb| 10” Diameter –
3“W
PI-08-0145| 30A Replacement Breaker| 3 oz| 3″H x 1.5″W x 2″D
PI-11-0232| 2000 lb winch with 49’ cabble| 12 lb| 4″H x 11″W x 4″D
PI-11-0215| 12v 34A AGM Battery| 13 lb| 6.5″H x 7″W x 3″D
*When looking from the front of the cart
All Overland Carts are manufactured by:
Granite Industries
595 East Lugbill Rd.
Archbold, Ohio 43502
877-447-2648
OverlandCarts.com |
GraniteInd.com
To view more products from Overland Carts scan the QR code with your phone or visit OverlandCarts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>