geotab HRN-IOXEXT IOX Extension Cable Instruction Manual
- October 30, 2023
- Geotab
Table of Contents
geotab HRN-IOXEXT IOX Extension Cable Instruction Manual
For the most up-to-date version, please visit: https://gtb.page.link/wzAY
Professional Installation Required — Successful application of this harness/IOX requires sufficient technical knowledge and expertise for the respective installation, i.e. Certified Geotab Installer or equivalent.
WARNING! Read important related Safety Information and Limitations of Use following these installation instructions. The GO device must be disconnected from the vehicle prior to harness/IOX installation. Post harness/IOX installation, connect the GO device, read and follow all instructions and warnings to prevent serious injury and/or vehicle damage
NOTICE: Refer to the table below for the maximum number of IOXs supported, depending on your configuration. Failure to follow these instructions may result in potential loss of data, and could result in malfunctions of downstream IOXs or other anomalous behavior.
For daisy chain configurations, do not exceed the following maximums:
Quantity of HRN-IOXEXT cables used| Maximum quantity of IOX
devices supported
---|---
1| 5
2| 2
Step 1 Connect HRN-IOXEXT to IOX devices and/or additional IOX
extension cables to form a daisy chain.
Step 2 Connect the daisy chain to the IOX expansion port of the GO
device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>