Beautyrest RF502A Remote Control Instructions
- October 30, 2023
- Beautyrest
Table of Contents
2Instruction of RF502A
Instructions
RF502A Remote Control
Figure
1 button ofremote
Item
1.1 ZG button 15
Click the ZG button, the actuator moves to ZG position, stop when click any
button during the movement.
1.2 AntiSnore button 12
Click AntiSnore button, actuators move to AntiSnore position, stop when click
any button during movement.
1.3 Head up 13
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released;
1.4 Head down 14
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when
released;
1.5 Foot up 17
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when
released;
1.6 foot down 18
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when
released; When moving to flat position, lumbar actuator and tilt actuator move
first, after 500ms, head and foot actuators start moving;
1.7 Flat 16
Click FLAT button, the bed goes flat, stop when click any button during the
process of going flat;
1.8 Massage head 1
Click MASSAGE HEAD button, head massage motor switches massage intensity,
massage intensityswitches among 0-1-2-3;
1.9 Massage foot 3
Click MASSAGE Foot button, head massage motor switches massage intensity,
massage intensityswitches among 0-1-2-3;
1.10 Massage time 2
Click MASSAGE time button to set massage time among 10-20-30mins.
1.11 Menu 4
Click Menu button to display the menu interface at screen.
1.12 back 5
Click Back button to operate the screen content as back.
1.13 up down left right 6 7 9 10
Click these buttons to operate the screen content as up,down,left,right.
1.14 ok 8
Click ok button to operate the screen content confirm.
1.15 white noise volume down 19
Click white noise volume down button to reduce the white noise volume.
1.16 white noise active/pause 20
Click white noise active/pause button to active or pause the white noise.
1.17 white noise volume up 21
Click white noise volume down button to plus the white noise volume.
1.18 Memory position 11
Click memory position to move the actuator to the memory position.
1.19 child lock 22
Double click child lock button to lock or unlock the remote.
1.20 pair 23
Click pair button for 3 seconds to pair.
FCC：
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Issue Department: Bedding Division
System Instruction
Instruction of RF432A
Date: 2023-05-26
Author:
Edition: 1.1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>