SOKSO Sound On Ear headphones User Manual

SOKSO Sound On Ear headphones User Manual

Overview

Thank you for placing your trust in our products!
Congratulations on your new headphones Sound On-Ear BT.

For safe handling of the product and in order to get to know the entire range of features:

• Read these user instructions thoroughly prior to initial use.
• Above all, observe the safety information!
• The device should only be used as described in these user instructions.
• Keep these user instructions for future reference.
• If you pass the device on to someone else, please include these user instructions. The user instructions are a component of the product.

We hope you enjoy your new headphones Sound On-Ear BT!

Symbols on your device

This symbol means that the contents of the user instructions must be observed.

Notes on trademarks

USB® is a registered trademark of USB Implementers Forum, Inc..
The trademark and brand name Switch On are the property of their respective owners.

Bluetooth®

The Bluetooth® word mark and the Bluetooth logo (®) are registered trademarks of Bluetooth SIG Inc. (Special Interest Group), any use of the trademark by the Hoyer Handel GmbH is effected within the framework of a license.

Intended purpose

This is an entertainment electronics device. The Sound On-Ear BT headphones is intended for playing sound from audio devices via Bluetooth or using the 3.5 mm jack socket. The device has a headset function for phone calls.

The device is designed for private home use and must not be used for commercial purposes.

The device must only be used indoors. Do not make any changes or carry out any repairs. The manufacturer is not liable for damage or malfunctions caused by improper repairs or modifications. This is the sole responsibility of the user.

Safety information

Warnings
If necessary, the following warnings are used in these user instructions:

⚠ DANGER!
In combination with the word “Danger”, this symbol indicates a high risk. Ignoring the warning will result in death or serious injury.

⚠ WARNING!
In combination with the word “Warning”, this symbol indicates a moderate risk. Ignoring the warning may result in death or serious injury.

⚠ CAUTION!
In combination with the word “Caution”, this symbol indicates a low risk. Ignoring the warning may result in minor or moderate injuries.

ATTENTION!
Possible risk of damage to the device.

NOTE :
Circumstances and specifics that must be observed when handling the device.

Instructions for safe operation

• This device contains a battery that cannot be replaced.
• Check the headphones before use. Do not use a defective or damaged device.

⚠ DANGER for children and people with disabilities!

• Packing materials are not children’s toys. Children must not play with the packing materials. There is a risk of suffocation.
• This device can be used by children from the age of 8 and people with restricted physical, sensory or intellectual abilities or a lack of experience or knowledge if they are supervised or have been instructed in how to use this device safely and if they have understood the resulting dangers. Children must not play with the device. Cleaning and maintenance by the user must not be performed by children without supervision.
• Keep the device out of the reach of children.

⚠ WARNING of accidents due to reduced awareness!

• Surrounding noises may sound different than usual. Never use the headphones during activities when you must be attentively aware of your surroundings, particularly when operating machinery or vehicles in traffic. (This also applies to bicycles.) You must also comply with the legal provisions and regulations of the country in which you are using the device.

⚠ WARNING – Danger from the battery!
The device contains a permanently installed lithium ion battery. Observe the following safety information.

• Always charge the battery with the original accessory (USB charger cable USB Type A to USB Type C).
• Do not cover the headphones during charging.
• The device must not be thrown into a fire! There is a DANGER OF EXPLOSION!
• Protect the battery against mechanical damages. There is a FIRE HAZARD!
• The device is provided with a lithium ion battery.
  • The battery cannot be removed!
  • This device must not be opened!
  • Dispose of the device as a complete unit!
• Do not expose the device to direct sunshine or heat. Use the device only in the temperature range from +10 °C to +35 °C. Only charge the battery within this temperature range. Please note that the storage temperature in a motor vehicle may be significantly higher than 35 °C.

WARNING! Risk of hearing damage!

• Set a low volume on the audio device before using the headphones.
• Avoid excessive volumes, particularly over extended periods or in the case of frequent use. Excessive volume can result in permanent hearing damage. To avoid hearing damage, always adjust the volume to a comfortable level.

⚠ WARNING – Radio interference!

• Switch off the device in aircraft, hospitals or near electronic medical systems.
• Radio waves might restrict the correct functioning of sensitive electrical devices. A minimum distance of 20 cm must be maintained between the product and heart pacemakers or implantable cardioverter defibrillators, as the electromagnetic radiation could restrict the correct functioning of heart pacemakers.
• Radio waves could cause hearing aids to malfunction.

ATTENTION – Danger for pets and livestock!

• Electrical devices can represent a danger to pets and livestock. In addition, animals can also cause damage to the device. For this reason you should keep animals away from electrical devices at all times.

ATTENTION – Damage to property!

• If you notice any irregularities (e.g. unusual noises, strange smells or the development of smoke), turn the device off immediately and remove the USB charger cable. Do not use the device any longer.
• If the device is moved from a cold location to a warm location, condensate may form in the device. Leave the device switched off for a few hours (at least approx. 2 hours).
• Protect the device against damage, e.g. from:
  • drips and water splashes
  • heat, direct sunlight and open flames
  • knocks and similar violent effects
• Candles and other open flames must be kept away from this product at all times in order to prevent the spread of fire.
• Protect connected cables against damage, e.g. from:
  • sharp edges
  • hot places
  • clamping or crushing
• The device may only be used in a dry environment!
• Do not use any astringent or abrasive cleaning agents.
• In order to avoid any hazards, do not make modifications to the device. Repairs must be carried out by a specialist workshop or the Service Centre.

Items supplied

1  Sound On-Ear BT headphones
1  USB charger cable 14 (USB Type A to USB Type C) 60 cm
1  3.5 mm jack cable 13 1.2 m
1  quick start guide QSG (overview for quick pairing with smartphones)
1  complete copy of the user instructions (on the Internet)
1  copy of the short manual (enclosed with the device)

• Remove all parts from the packaging and check that all parts are present.
• Remove all packing material.
• Check that the device is undamaged.

If the delivery is incomplete or defective, please contact the responsible service centre of the manufacturer.

Charging

⚠ WARNING!

• The device must not be covered while the battery is charging.
• The device must only be charged in a dry environment.

NOTES :

• Charge the battery fully before using the device.
• The maximum battery capacity is reached after approx. 4 – 5 charging cycles.
• The charging time of an empty battery is approx. 2.5 hours.
• It is not possible to playback whilst charging.

When the battery is low, the LED 9 starts flashing red. You will hear an audio signal.

1. Plug the USB-C plug connector of the USB charger cable 14 into the USB-C port 10 of the device.
2. Connect the USB A plug of the USB charger cable 14 with a PC, a power adapter with USB connection or a powerbank. Please pay attention to the technical data. If the headphones were switched on, the charging process will switch them off. The LED 9 is lit red during the charging process. The LED goes out when the battery is fully charged.

Put on the headphones

⚠ WARNING of accidents due to reduced awareness!

• Never use the headphones during activities during which you need to pay full attention to your surroundings.

1. Put on the headphones in such a way that the marking R is on the right and L is on the left.
2. Figure B: adjust the size of the headphones to your head size by pulling out or sliding in the two sliders 1.

Operation

Switching headphones on/off

NOTE: the headphones switch off automatically …
… after approx. 5 minutes without any connection to an audio device.
… if the battery is too weak.

• To switch the headphones on or off, press and hold the button • 7 for approx. 5 seconds until an acoustic signal sounds.

Establishing a Bluetooth connection

NOTES:

• The identification of the device is Sound On-Ear BT.
• After switching on, the device automatically tries to reconnect to the last paired device.
• Please note that the establishment of the connection may vary slightly depending on the device and the software used.
• The device switches off if no Bluetooth connection is established within approx. 5 minutes.
• If you want to connect the headphones to a computer, you may need to set the sound input in the operating system in order to use the headphone microphone for use in chat programs, for example.
• If you pass the device on to someone else, in order to protect your data and your privacy, you should disconnect the Bluetooth connection to the device and delete it from the connection list on your smartphone.

1. Press and hold the button • 7 for approx. 5 seconds to switch on the device. An audio signal sounds. The LED 9 starts flashing red/blue while the first connection to the audio device is being established. The headphones now transmit the identification.

2. If necessary, start the Bluetooth connection on the audio device (e.g. smartphone, MP3 player). The audio device will now receive the device identifier Sound On-Ear BT.

3. Establish a connection to the headphones on the audio device. If you are asked for a password, enter “0000”. When the devices are connected, the LED 9 flashes blue regularly and an audio signal sounds.
   NOTE : usually, audio devices remember the identification of the device. In this case, it may not be necessary to establish the connection manually again if the Bluetooth function is activated.

4. Start the playback of a music track on the audio device. The sound is played by the headphones.

No connection to the audio device

If a connection to an audio device cannot be established or the headphones remain silent, perform the following steps:

1. In the device list on the audio device, delete all entries of Sound On-Ear BT. This decouples the headphones from the smartphone.
2. Switch on the headphones.
3. Pair the headphones as described.

Disconnect/interrupt a Bluetooth connection

• If you switch off the headphones, the connection to the audio device will temporarily be interrupted.
• Briefly press the O button 5 twice to disconnect the current connection between the smartphone and the headphones. Pairing is restarted.
• In order to permanently disconnect the Bluetooth system from the audio device, delete all Sound On-Ear BT entries in the device list on the player.

Functions of the buttons

WARNING! Risk of hearing damage!

• If the listening volume is too loud, this can cause hearing damage! In order to prevent possible damage or loss of hearing, avoid listening at high volume levels for long periods of time.

NOTES:

• When the maximum adjustable volume is reached, the headphones will beep.
• The buttons are only active with a Bluetooth connection, not when using a cable.
• Operation may vary depending on the device type, software version and app.

You can perform the following functions with the buttons on the headphones:

Calls via Bluetooth

If the device is connected to a smartphone it is possible for you to accept phone calls.

NOTES :

• For some mobile telephones you have to choose Bluetooth as the audio source when accepting a call.
• Music playback is automatically paused when a call is received. Playback resumes after the call ends.
• Not all functions are supported by all mobile telephones.

1. Press the • button 7 briefly to accept the call.
2. Adjust the volume during the phone call using the buttons + 6 and ­- 8.
3. Press the • button 7 briefly during the phone call to end the call. If you have accepted the call while the music was playing, the song will continue to be played after ending the phone call.

Interruption of the connection

The connection is interrupted if …
… one of the devices is switched off;
… the Bluetooth function is switched off;
… the range (approx. 10 metres) is exceeded.

Playing music back using the cable

NOTE : playback via a cable has priority over the Bluetooth connection. A possibly existing Bluetooth connection will be interrupted when the 3.5 mm jack cable 13 is plugged in.

1. Plug one jack plug of the 3.5 mm jack cable 13 into the headphone socket of the sound source (e.g. smartphone, MP3 player) and the other jack plug into the jack socket 12 on the device.
2. Switch on the audio device.
3. Start playback on the audio device. The sound is reproduced via the headphones. Playback and volume are controlled on the audio device.

Transport

The headphones can be folded to save space.

1. Figure A+B : place the headphone earcups 2 and 4 in the position shown in Figure B by pushing them in.
2. Figure C : fold the headphone earcups 2 and 4 inwards into the headset 3.

Cleaning

ATTENTION – Damage to property!

~ Disconnect all cable connections.
~ Protect the device from water drops and water splashes.
~ Do not clean using sharp objects or abrasive cleaning agents.

• If necessary, clean the device with a soft, damp cloth.

Storing if not in use

• When no longer using the device, store it in a place where neither high temperatures nor moisture can affect it.
• Charge the battery before storing the headphones away for an extended period of time. Please note that if the device is stored for too long, this may reduce the battery capacity. Avoid a deep discharge of the battery.

Disposal

The battery integrated into this device must not be disposed of in household waste. The device must be disposed of properly with the battery installed.

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances.

This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.

Packaging
When disposing of the packaging, make sure you comply with the environmental regulations applicable in your country.

Trouble-shooting

If your headphones fail to function as required, please try this checklist first. Perhaps there is only a minor problem, and you can solve it yourself.

ATTENTION – Damage to property!

• Do not attempt to repair the device yourself under any circumstances.

Technical specifications

Simplified EU Declaration of Conformity

HOYER Handel GmbH hereby declares that the radio equipment type Switch On SOKSO 16 A1 (IAN 411377_2204) complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://qr.hoyerhandel.com/l/411377

Notes on the EU declaration of conformity

HOYER Handel GmbH hereby declares that this device complies with the essential requirements of Directive ROHS 2011/65/EU.

Symbols used

Subject to technical modifications.

Warranty of the HOYER Handel GmbH

Dear Customer, your device is provided with a 3 year warranty starting with the purchase date. In the event of product defects, you are entitled to statutory rights against the vendor. These statutory rights are not restricted by our warranty presented in the following.

Warranty conditions
The warranty period starts with the purchase date. Please keep the original purchase receipt in a safe place. This document is required to verify the purchase.
If within three years from the purchase date of this product a material or factory defect occurs, the product will be repaired or replaced by us ­ at our discretion ­ free of charge to you, or the purchase price will be refunded. This warranty implies that within the period of three years the defective device and the purchase receipt are presented, including a brief written description of the defect and the time it occurred.
If the defect is covered by our warranty, the repaired or a new product will be returned to you. No new warranty period starts with a repair or replacement of the product.

Warranty period and statutory claims for defects
The warranty period is not extended when the warranty has been claimed. This also applies to replaced and repaired parts. Any damages and defects already existing at the time of purchase must be reported immediately upon unpacking. Repairs arising after the expiration of the warranty period are subject to a charge.

Warranty coverage
The device was produced carefully according to strict quality guidelines and tested diligently prior to delivery.

The warranty applies to material or factory defects.

Excluded from the warranty are wear parts subject to normal wear and damages to fragile parts, e.g. switches, lamps or other parts manufactured from glass.

This warranty expires if the product is damaged, not used as intended or not serviced. For the proper operation of the product, all instructions listed in the operating instructions must be observed carefully. Any form of use and handling that is advised against in the operating instructions or warned against must always be avoided. The product is only intended for private and not for commercial use. In the case of incorrect and improper treatment, use of force and interventions not performed by our authorized Service Centre, the warranty shall cease.

Handling in case of a warranty claim
In order to ensure prompt processing of your matter, please observe the following notes:

• Please keep the article number IAN: 411377_2204 and the purchase receipt as a purchase verification for all inquiries.
• The article number can be found on the rating plate, an engraving, the title page of your instructions (in the bottom left), or as a label on the rear or underside of the device.
• If faulty operation or other defects occur, first contact the Service Centre listed in the following by telephone or email.
• Then, you are able to send a product reported as defective free of charge to the service address specified to you, including the purchase receipt and the information on the defect and when it occurred.

At www.kaufland.com/manual you can download these and many other manuals.

This QR code will take you directly to our international page (www.kaufland.com/manual). By clicking on the corresponding country you can access the national overview of our manuals. By entering the article number IAN: 411377_2204 you can open your user instructions.

IAN: 411377_2204

Supplier
Please note that the following address is no service address.

HOYER Handel GmbH
Kühnehöfe 12
22761 Hamburg
GERMANY

References

• qr.hoyerhandel.com/l/411377
• manual | Kaufland
• Naslovnica | Kaufland

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>