myCharge Transit TR26K TX26K TA26K User Manual

October 30, 2023
myCharge

myCharge Transit TR26K TX26K TA26K

QUICK START GUIDE

COMPATIBILITY

Virtually all smartphones

PACKAGE CONTENTS

  • myCharge TRANSIT
  • Quickstart Guide

TRANSIT

WELCOME!

Congratulations, you’re now the proud owner of the myCharge TRANSIT! This powerbank was designed with your on-the-go charging needs in mind and is compatible with virtually all USB devices.

The portable powerbank’s 2600mAh battery capacity guarantees that your device can stay charged and connected wherever your travels may take you.

PRODUCT SPECS

  • Battery Capacity: High Density 2600mAh Battery
  • Wall Prong Input: 100-240VAC 50/60Hz, 0.3A
  • Car Adaptor Input: 12VDC-24VDC, 1.2A
  • USB Output: 5VDC, 1.0A
  • Dimensions: 3.7 x 2.4 x 1.1 inches
  • Weight: 0.35 lbs.

HELPFUL TIP

Watch the instructional video: mycharge.com/pages/videos

Controls

PRODUCT TECHNOLOGIES

Your new powerbank is built with these technologies to give you the fastest, safest, and smartest user experience possible:

| ULTRA˜FAST RECHARGING
Allows for the powerbank to recharge at the fastest rate possible through its integrated wall prongs and car adaptor
---|---
| SMARTSENSE™
Detects the connected device and charges it at the maximum speed allowed by the device, shortening charge time
| PASS˜THROUGH CHARGING
Charges the powerbank and the device in parallel. You’ll have both charged for extra power when you need it
| BATTERY PROTECTION
Protects the powerbank and your device against overcharging, undercharging, overtemperature, overcurrent and short circuit for your safety
| HIGH EFFICIENCY
Maximizes power to your device by minimizing the loss of energy delivered, keeping you powered longer
| HIGH DENSITY BATTERY
Increases run-time between charges and makes the TRANSIT compact and lightweight

CHARGING DEVICES USING YOUR TRANSIT

Use your own device’s cable to charge it through the USB port of the TRANSIT. When the device is plugged in, the TRANSIT will continue to charge it until it is unplugged or runs out of power. With SmartSense™ technology, your TRANSIT is compatible with just about any smartphone on the market. It senses what device it’s plugged into and provides the maximum power allowed, giving you the benefit of faster charging. The TRANSIT’s high efficiency technology minimizes energy loss from the input source to the powerbank and from the powerbank to the device.

RECHARGING YOUR TRANSIT

Your TRANSIT comes with a built-in car adaptor and wall prongs for quick and convenient recharging of the powerbank. This ultra-fast recharging technology maximizes the amount of available power going into your charger.

Your TRANSIT has pass-through charging, allowing you to charge both the powerbank and your device simultaneously.

As your TRANSIT recharges, the LEDs will illuminate to indicate the battery level. A fully charged unit shows 4 solid, non-blinking LEDs. It is normal for your TRANSIT to be warm to the touch while in use.

CHECKING BATTERY LEVEL

Your TRANSIT contains high density batteries, allowing for the powerbank to remain small and powerful for ultimate portability. To check the battery level, press the power button. The LEDs will illuminate to show you how much battery life remains – 4 solid LEDs mean your TRANSIT is fully charged and 1 LED means that it’s almost empty. If you see 1 LED blinking, this means you have less than 5% remaining and should recharge.

FAQ/TROUBLESHOOTING

Will my TRANSIT charge any smartphone?

Your TRANSIT is fully compatible with virtually all smartphones. The powerbank will identify which device is connected through its SmartSense™ technology.

What should I do if my device doesn’t charge?

Press the power button of your TRANSIT to initiate charging and to check battery level. It is possible that there is simply not enough power to charge your device, recharge your TRANSIT if needed. If your device still isn’t charging, check that the charging cable is properly connected to the USB port and to your device.

What should I do if all 4 LEDS are °ashing?

If your powerbank is recharging, this is normal. If you see all 4 LEDs flash for 10 seconds, the device connected draws more power than the TRANSIT can give (max 1.0A) and the USB port will shut off.

Why are some LED lights solid and some °ashing when I recharge the TRANSIT?

The solid LEDs tell you how much the powerbank is currently charged, while the flashing LEDs indicate how much is left to charge. Your TRANSIT is fully charged when all 4 LEDs are solid.

Can I charge my device and the TRANSIT at the same time?

Yes! The TRANSIT has pass-through charging technology, which means you can simultaneously charge your device alongside the TRANSIT rather than charging each separately.

How many charge cycles do I get with the TRANSIT?

From empty to full, the TRANSIT is capable of recharging at least 500 times! Count on your myCharge to keep you going.

WARRANTY INFORMATION

We are dedicated to making the highest quality products possible. In that, we provide a one-year limited warranty from the date of purchase. Keep a copy of your purchase receipt as proof of purchase and register your product at mycharge.com to activate it and check for the latest product updates as they develop. Failure to register your product and/or to provide proof of purchase may void the warranty.

RFA Brands, LLC sells its products with the intent that they are free of defects in manufacture and workmanship for a period of one year from the date of original purchase, except as noted in our policy. RFA Brands, LLC warrants that its products will be free of defects in material and workmanship under normal use and service. This warranty extends only to consumers and does not extend to Retailers.

To obtain warranty service on your product, please visit mycharge.com/pages/support

THANK YOU FOR CHOOSING MYCHARGE


DOWNLOAD

myCharge Transit TR26K TX26K TA26K User Manual – [Download PDF]


Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals