DELTACO DELO-0400 LED Table Lamp User Manual

: October 30, 2023
: DELTACO

Table of Contents

DELTACO DELO-0400 LED Table Lamp
DELO-0400 LED Table Lamp
Product Information
Usage Instructions
OVERVIEW
Use
Support
Documents / Resources

DELTACO DELO-0400 LED Table Lamp

DELTACO-DELO-0400-LED-Table-Lamp-PRODUCT

DELO-0400 LED Table Lamp

A Nordic Brand

The DELO-0400 LED Table Lamp is a modern and stylish lamp that provides bright and comfortable lighting for your workspace. The lamp comes with a wireless charging area and a timer button for automatic turn off. You can also adjust the color temperature to under 4000K for night use.

Product Information

Power port (12V DC/2A)
Status indicator for wireless charging
Wireless charging area
Timer button (for automatically turning off the light)
On/Off button
Light mode button

Warnings

Read the safety instructions for the power adapter in the separate AC manual.
Do not stare into the light.
If your eyes hurt while using the light, increase the distance between you and the light. You can also reduce the light’s intensity.
Strong electromagnetic interference might turn the light on or turn off.
The lamp pole should not be bent continuously, it will lead to lamp pole damage.
Do not use on desks with a tilt greater than 6 degrees. The product might fall.
When the LED light is used up, change to a new product. The LED lights cannot be replaced or repaired.

Usage Instructions

Connect the lamp to the power source using the power port.
Press the On/Off button to turn on or off the lamp.
Press the Light mode button to adjust the light mode. Natural light – White light – Yellow light.
Press and hold the On/Off button to adjust the light intensity.
Place your wireless charging enabled device on the wireless charging area to charge wirelessly.
Use the timer button to set automatic turn off time for the lamp.

For more product information, visit www.aurdel.com. For support, contact us at help@deltaco.eu.

OVERVIEW

Thank you for choosing Deltaco!

Power port (12V DC/2A )
Status indicator for wireless charging
Wireless charging area
Timer button (for automatically turning off the light)
On/Off button
Light mode button

Use

Connect to power (1).
Press the on/off button (5) to power on or off.
Press the light mode button (6) to change the light mode.
- Natural light -> white light -> yellow light.
Press and hold the on/off button (5) to change the light’s intensity.
Press and hold the timer button (4) to start the timer.
- The light flashes 2 times to confirm the light will turn off automatically in 40 minutes. If you press again during this period, it will restart the 40-minute timer.
For wireless charging, place your mobile phone (compatible with wireless charging) in the wireless charging area (3). Your phone should show a notification that charging has started and the status indicator (2) is lit green.
When the status indicator (2) is lit yellow/light green, it means it is fully charged.
If the status indicator is flashing red, it could mean there is an obstacle between the phone and the charger.

Warnings

Read the safety instructions for the power adapter in the separate AC manual.
Do not stare into the light.
If your eyes hurt while using the light, increase the distance between you and the light. You can also reduce the light’s intensity.
Strong electromagnetic interference, might turn the light on or turn off.
The lamp pole should not be bent continuously, it will lead to lamp pole damage.
When the LED light is used up, change to a new product.
- The LED lights can not be replaced or repaired.
Do not use on desks with a tilt greater than 6 degrees.
- The product might fall.
When using the lamp at night, please adjust the color temperature to under 4000K (Natural light or yellow light).

Support

More product information can be found at www.aurdel.com.
Contact us by e-mail: help@deltaco.eu
Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.
Maximum RF output (EIRP): <20dBm.
RF: 2.4 GH

SIMPLIFIED EU DECLARATION OF CONFORMITY

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of Conformity is available at the following internet address: www.aurdel.com/compliance/