itC T-2221 CD Plus Tuner Player Instruction Manual

: October 30, 2023
: ITC

Table of Contents

SAFETY PRECAUTIONS
FEATURES
NOMENCLATURE AND FUNCTIONS
CONTROL INSTRUCTION
BLOCK DIAGRAM
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

itC T-2221 CD Plus Tuner Player Instruction Manual

SAFETY PRECAUTIONS

Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.

Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and understand the safety symbols and messages so you are thoroughly aware of the potential safety.

WARNING Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury
WARNING Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.

WARNING

When Installing the Unit

Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power cord in close proximity to heaters, and never place heavy objects — including the unit itself — on the power cord, as doing so may result in fire or electric shock.
Be sure to replace the unit’s terminal cover after connection completion. Because high voltage is applied to the speaker terminals, never touch these terminals to avoid electric shock.
Be sure to ground to the safety ground (earth) terminal to avoid electric shock. Never ground to a gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface. Doing so may result in the unit falling down, causing personal injury and/or property damage.

When the Unit is in Use

Should the following irregularity be found during use, immediately switch off the power, disconnect the power supply plug from the AC outlet and contact your nearest dealer. Make no further attempt to operate the unit in this condition as this may cause fire or electric shock.
- If you detect smoke or a strange smell coming from the unit.
- If water or any metallic object gets into the unit
- If the unit falls, or the unit case breaks
- If the power supply cord is damaged (exposure of the core, disconnection, etc.)
- If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage components inside the unit. Refer all servicing to your nearest dealer. ITC ITC
Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit. If they accidentally spill into the unit, this may cause a fire or electric shock.
Do not insert nor drop metallic objects or flammable materials in the ventilation slots of the unit’s cover, as this may result in fire or electric shock.

CAUTION

When Installing the Unit

Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.
When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock.
When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving the unit with the power cord connected to the outlet may cause damage to the power cord, resulting in fire or electric shock. When removing the power cord, be sure to hold its plug to pull.
Do not block the ventilation slots in the unit’s cover. Doing so may cause heat to build up inside the unit and result in fire.
Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric shock.

When the Unit is in Use

Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
Make sure that the volume control is set to minimum position before power is switched on. Loud noise produced at high volume when power is switched on can impair hearing.
Do not operate the unit for an extended period of time with the sound distorting. This is an indication of a malfunction, which in turn can cause heat to generate and result in a fire.
Contact your dealer as to the cleaning. If dust is allowed to accumulate in the unit over a long period of time, a fire or damage to the unit may result. ITC
Switch off the power, and unplug the power supply plug from the AC outlet for safety purposes when cleaning or leaving the unit unused for 10 days or more. Doing otherwise may cause a fire or electric shock.
If dust accumulates on the power supply plug or in the wall AC outlet, a fire may result . Clean it periodically. In addition ,insert the plug in the wall outlet securely.

An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.

FEATURES

Dual music source player, built in AM/FM tuner
Built in CD, MP3 source
One road CD output
One road AM/FM tuner output
With IR remote control function
With independent volume control

NOMENCLATURE AND FUNCTIONS

FRONT PANEL

In/out bin
Play
Stop
Play mode (USB/SD card)
Last
Next
USB mode/CD mode switch
Mute
Tuner channel select
Power indicator
Power switch
Down
UP
AM/FM tuner mode (manual/ auto mode)
Menu
Next
Mute
SD card slot
USB interface
Bin gate
NOTE : The case has been connected with power cord, please insert power into the grounded power grid, avoid static electricity interrupting to damage equipment.
NOMENCLATURE AND FUNCTIONS
REAR PANEL ****
~220-240V 50/60Hz power input
FM antenna
AM antenna. Stop
Tuner output
“R” right channel “L” left channel
CD output
“R” right channel ” L” left channel

REMOTE CONTROL

Remote Control

Power button
Programming key
Number keys
Number keys
Play / Pause
Duplicate keys
Menu key
Last
REW
Increase/decrease volume
Manual / automatic mode button
Previous button
Radio auto / manual switch button
Radio button
Channel shift keying
On / Off key
Enter
Manual key
Radio button
Next button
Mute button
Left and right adjustment key
Next
Fast forward key
USB / CD key conversion
Stop button
Channel +10 hex key
In / out doors button

CONTROL INSTRUCTION

Press “Power Switch” ,connect with power, power indicator is on,display shows CLOSE, equipment will be reading status in 2 seconds, display shows CORD ,if there is no disc, it will show NO DISC.
Press “IN/EJECT”, display shows OPEN, player will eject tray automatically.
Put disc onto tray.
Press “In/EJECT” again, display shows CLOSE, it begins reading Disc (CORD) in 2 seconds.
No matter what disc, after reading, it will automatically cycle play all.
Press STOP, stop, it shows total songs and total time.
Press PLAY, it begins cycle play all.
Insert USB/SD card, press USB/SD button on remote control,it can read the content, and can control by re mote control or the function keys on the front panel.(NOTE: The max for the USB is 8GB)
If there is no disc in the player, it will automatically convert to read USB or SD card.
The valid distance for the remote control is within 6 meters, the valid angle is 45 degree.
Press remote control can control specified CD/MP3 function.