Tokina SZ TA-019 Mount Adapter Camera Lens Instruction Manual

Tokina SZ TA-019 Mount Adapter Camera Lens

Introduction

The Tokina mount-adapter can be used with Tokina Canon EF mount lenses and Sony E-mount cameras. Before use, read this manual and warranty carefully, and be sure to use the product correctly.

• We do not guarantee that the product will work with lenses other than those that are compatible.
• Please check to our website for compatible interchangeable lenses and functions.

Names of Parts

1. CD USB terminal
2. Lens attachment indicator
3. Camera attachment indicator
4. Lens attachment/removal button

Attaching a lens to the mount-adapter

Align the lens attachment indicator on the mount-adapter with the camera attachment indicator on the lens, and turn the lens in the direction of the arrow until it clicks into place.

• When attaching, turn clockwise toward the mount adapter.

Attaching to a camera

Align the camera attachment indicator on the mount-adapter with the lens attachment mark on the camera, and turn the lens in the direction of the arrow until it clicks into place.

• Be sure to attach a lens to the mount-adapter  before attaching to a camera.

Removing from a camera

Follow the instructions in the camera’s user manual for attaching/removing lenses.

• Do not touch the signal contact points on the lens attachment surface when attaching or removing. Corrosion could cause the contact points to malfunction.
• Always use both hands when attaching or separating the camera and mount-adapter.

While pressing and holding the lens removal button on the camera, turn the lens attached to the mount-adapter in the direction of the arrow until it stops to separate it from the camera.

Removing a lens from the mount-adapter

While pressing and holding the lens removal button on the mount-adapter, turn the lens in the direction of the arrow until it stops to remove it from the mount-adapter.

Photography mode switch

1. mode1 :Use this setting for still photography
2. mode2:Use this setting for filming videos
   • Be sure to turn the main body of the camera off before switching settings.

Updating firmware

Prepare a PC and a USB cable, one end of which should be USB-Type-8.
Note: Please be careful because some USB cables only support charging. Connect the mount-adapter to the PC using the USB cable.
Check our website for information on updates.

Specifications

Please note that specifications and appearance may be changed without notice to improve the product.
The ( E Mark is a symbol indicating conformance with relevant standards that is required labeling for specific products sold in the EU. This mark is also indication that the product is compliant with the RoHS Directive and the EMC Directive.

The CA Mark is a symbol indicating conformance with relevant standards that is required labeling for specific products sold in the UK (England, Wales, and Scotland). This mark is also indication that the product is compliant with the RoHS Directive and the EMC Directive.
e A display mark indicating inclusion in the China
RoHS directive (Administrative Measure on the Control of Pollution Caused by Electronic Information Products).

Handling Precautions

• When attaching the mount-adapter to a lens or camera, make sure it is properly set and securely locked. Also, do not subject the mount-adapter and the lens attached to a camera to excessive loads. Doing so may damage the mounting parts of both. Large lenses are prone to applying a load to the mounting part, so be sure to hold the camera and lens when operating or moving.
• After use, store the mount-adapter clean in a manner that maintains its cleanliness. Do not use thinner, benzene, or other organic agents to remove dirt, etc. Clean with a soft, damp lens cloth. When storing long-term, store in a cool and dry place.
• This mount-adapter is not waterproof. Be careful not to submerge in water. If submerged, it will be almost impossible to repair, so please handle with care.
• Do not remodel or alter the mount-adapter. Doing so may damage the lens or camera. Mount-adapters that have been remodeled or altered may not be accepted for repair.

Please refer to our website for user manuals in German, French, Spanish, Italian, Chinese, Korean, and Russian.

Kenko Tokina Co., Ltd.
https://tokinalens.com/
KT Nakano Building 5-68- l o. Nakano. Nakano-ku, Tokyo l 64-8616, Japan

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>