SEALEY MS081FS Motorcycle Helmet and Gear Tidy Freestanding Instruction Manual
- October 30, 2023
- SEALEY
Table of Contents
SEALEY MS081FS Motorcycle Helmet and Gear Tidy Freestanding
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT : PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
- DO NOT overload this tidy; it should only be used for the designed purpose.
- DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
- Ensure that, when installed, it can be used without over-reaching or over-balancing
INTRODUCTION
Powder coated steel construction, for added corrosion resistance. Freestanding unit, designed to organise the storage of gloves, clothing, boots and helmet. Adjustable shelves allows for easy storage of up to four helmets. Strong construction, shelf capacity of 18kg and hanging rack capacity of 10kg. Large capacity, capable of storing two full sets of kit and more.
SPECIFICATION
- Model No:……………………………………………………… MS081FS
- Depth:………………………………………………………………. 460mm
- Height:……………………………………………………………. 1925mm
- Width:……………………………………………………………….. 545mm
ASSEMBLY
- Fit lower section of uprights into base unit (A).
- Fit triangular braces with fixings supplied (B).
- Insert upper upright sections into lower uprights (C).
- Fit shelves into uprights at desired height (D).
- Adjust feet to ensure good contact with floor (E).
CARE
- Clean with a soft, damp cloth.
- DO NOT use abrasive or solvent cleaners
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories and packaging should be sorted, taken to a recycling centre and
disposed of in a manner which is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
REGISTER YOUR PURCHASE HERE
Note : It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important : No Liability is accepted for incorrect use of this product.
Warranty
Guarantee is 12 months from purchase date, proof of which is required for any claim
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
- 01284 757500
- sales@sealey.co.uk
- www.sealey.co.uk