SONY RDR-VX410 Video Cassette Recorder/ Dvd Recorder Owner’s Manual
- June 4, 2024
- Sony
Table of Contents
2021/10/08 06:33:04 (GMT+09:00)
SERVICE MANUAL
RDR-VX410
RMT-D224P
Model
New Zealand Model
TS-10 MECHANISM
Refer to the SERVICE MANUAL of VHS MECHANICAL ADJUSTMENT MANUAL VII for MECHANICAL ADJUSTMENTS. (9-921-790-11)
SPECIFICATIONS
System
[DVD recorder section] Laser
Semiconductor laser Audio recording format
Dolby Digital
Video recording format
MPEG Video
[VCR section] Format
VHS PAL standard
Video recording system
Rotary head helical scanning FM system
Video heads
Double azimuth four heads
Tap speed
SP: PAL 23.39 mm/s
LP: PAL 11.70 mm/s
EP: NTSC 11.12 mm/s, playback only
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min (with E180 tape)
[Tuner section]
Channel coverage
RDR-VX410 (B, E1, E2):
PAL (B/G, D/K)
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S41
HYPER S21 to S41| RDR-VX410 (GI):
PAL (I)
VHF: Ireland A to J, South Africa 4 to 13
UHF: B21 to B69
CATV: S01 to S05, S1 to S20
HYPER: S21 to S41
---|---
RDR-VX410 (B):
SECAM (L): (For French model)
VHF F2 to F10
UHF F21 to F69
CATV B to Q
HYPER S21 to S41| RDR-VX410 (AU2):
PAL (B/G)
VHF: E2 to E12
UHF: E21 to E69
CATV: S01 to S05, S1 to S41
PAL (B/B)
VHF: R1 to R12
UHF: R21 to R69
The above channel coverage merely ensures channel reception within these
ranges. It does not guarantee the ability to receive signals in all
circumstances.
Aerial out
75-ohm asymmetrical aerial socket
[Timer section]
Clock
Quartz locked
Timer indication
24-hour cycle
Timer setting
12 programs in total (max.)
Inputs and outputs
LINE 2 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative
AUDIO IN, phono jacks (2)
Input level: 327 Vrms
Input impedance: more than 47 kilohms S VIDEO, 4-pin, mini-DIN jack (1)
Y: 1.0 Vp-p, unbalanced, sync negative
C: 0.286 Vp-p, load impedance 75 ohms
— Continued on next page —
VIDEO CASSETTE RECORDER/ DVD RECORDER
EXPLODED VIEWS
NOTE:
- -XX, -X mean standardized parts, so they may have some differences from the original one.
- Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
8-1-1 Cabinet Assembly
- The mechanical parts with no reference number in the exploded views are not supplied.
- Abbreviation
AU2: Australian, and New Zealand models
B: French model
E1, E2: AEP model
GI : UK model
The components identified by mark 0 or dotted line with mark 0 are critical
for safety. Replace only with part number specified.
8-1-2 VCR Mechanical Parts (Top Side)
8-1-3 VCR Mechanical Parts (Bottom Side)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>