PureAction SH388 Water Softener Shower Head User Manual
- October 30, 2023
- PureAction
Table of Contents
PureAction SH388 Water Softener Shower Head
Specifications
- Brand: PureAction
- Style: Vitamin C
- Shape: Round
- Material: Stainless Steel, Acrylonitrile Butadiene Styrene
- Finish Type: Chrome
- Setting Type: Rain, Massage, Combo
- Installation Method: Wall Mounted
- Product Dimensions: 4″L x 3″ W
- Item Weight: 6.1 ounces
- Item Model Number: SH388
- Flow Rate: 1.8 Gallons Per Minute
- Capacity Description: 12000
- Cutting Diameter: 3 Inches
- Accessory Connection Type: 1/2-Inch
Description
By lessening the effects of hard water, the PureAction SH388 Water Softener Shower Head is an inventive and useful way to enhance your showering experience. This shower head combines the advantages of water-softening technology with the functionality of a conventional shower head. Water with high mineral content, like calcium and magnesium, is a typical problem in many homes. Among the issues it may cause are dry skin, brittle hair, clogged showerheads, and soap residue buildup. These problems are addressed by the PureAction SH388 Water Softener Shower Head, which has a built-in water softening system.
This shower head may simply replace your current shower head thanks to its small size and stylish design. It has a removable filter cartridge that efficiently filters out pollutants and minerals from the water for softer, clearer water that makes taking a shower more enjoyable. There are various advantages to the PureAction SH388 Water Softener Shower Head. Your skin feels softer and smoother once it has been moisturized and hydrated. Additionally, it encourages hair that appears healthier by minimizing damage from hard water minerals and reducing dryness. The water-softening capabilities of the shower head also aid in preventing limescale buildup, extending the life of your shower fittings.
Installation
- Remove the existing showerhead from the shower arm by turning it counterclockwise.
- Clean any debris that may be present on the threaded pipe.
- Wrap included Teflon tape tightly around shower pipe threads.
- Take assembled PureAction showerhead place it on the shower arm and tighten it by hand turning it clockwise.
- If additional tightening is necessary, use a soft cloth on the nut to protect the finish and then tighten it with a wrench.
- Check for leaks and tighten as needed.
Activate Your Warranty
Register your product online at www.PureActionBrand.com in order to activate your 100°/o Manufacturer Warranty. Join our VIP Club to receive e-mail alerts and steep discounts for new products and special promotions.
How To Use
- Connect the shower arm with the PureAction SH388 Water Softener Shower Head. Securely hand-tighten it to ensure a connection without leaks. If a rubber or fabric grip is required, use it, but don’t tighten it too much.
- There are various shower settings available on the PureAction SH388, including rainfall, massage, or a mix of the two. By turning the shower head’s faceplate or using any of the provided switches or buttons, select the preferred setting.
- By adjusting the shower handle or tap, start the water flow. The PureAction SH388 will filter and soften the water as it passes through it, giving you a showering experience.
- The PureAction SH388 Water Softener Shower Head will assist in lessening the impacts of hard water, making showering more enjoyable. You might experience softer water, less dry skin and hair, and less limescale accumulation on your shower fittings.
Time to Replacement of the filter cartridge
On average, filter cartridges should be replaced for every 10,000-12,000 gallons of water usage or every 6-8 months. For replacement filters, please, visit www.amazon.com/B07D99ZB4V or www.PureActionBrand.com
How is the replacement to be done?
- Be cautious to turn off the shower’s water supply before changing the filter cartridge. This will stop the flow of water while you make the replacement.
- To remove the PureAction SH388 shower head from the shower arm, use a wrench or your hand. To unlock and remove it, turn it in the opposite direction.
- The filter cartridge is affixed inside the shower head and is visible once the shower head has been removed. Typically, it is situated where the water enters the shower head.
- To remove the filter cartridge from the shower head, grasp it and turn it anticlockwise. Using some force could be necessary, but take care not to harm the shower head or any other parts.
- Put a fresh filter cartridge into the filter housing that is appropriate for the PureAction SH388 model. To fix it in place, turn it clockwise. Make sure it is positioned securely and snugly.
- Reinstall the shower head by lining it up with the shower arm. To tighten it tightly without overtightening, use your hand. Make sure the seal is adequate to stop any leaks.
- Adjust the shower handle or tap to start the water flowing once the shower head is firmly in place. Make sure the water is flowing through the shower head properly and look for any leaks.
Frequently Asked Questions
The nozzles are spraying water randomly. How do I stop this?
This is caused by the very high concentration of minerals in your local water so the nozzles get clogged due to the water build up. Press the nozzle that is spraying randomly with your finger to release the water build up. If the problem persists soak the shower head in a bowl full of vinegar and leave it for 2-3 hours, once finished reinstall and let the water flow for 2 minutes to flush the vinegar.
The shower head is leaking from the top ring. What should I do?
This caused because the top ring is not tightened enough. Tighten the top ring by turning it clockwise without unmounting the shower head. If the problem persists, you should unmount the shower head by turning it counterclockwise, then with the shower head in a flat surface you can further tighten the ring with your entire hand and then mount the shower head again.
The shower head is leaking from connection with the shower arm. What should I do?
This can be caused because there is no Teflon tape in the thread, no washer inside the ball joint or the connection is not tightened enough. To solve this, remove the shower head and verify that the washer is properly placed inside the ball joint, also there is enough Teflon tape in the shower arm, then install the shower head again by turning it clockwise as hard as you can without using any wrench.
How do I replace the filter cartridge?
Unscrew the shower head at the middle joint (not the front metal plate!). Discard the old cartridge and replace it with the new one with the stones facing up. Assembly the shower head again by turning it clockwise and tighten as needed.
How does the water softener feature work in the PureAction SH388 Shower Head?
The water softener feature in the PureAction SH388 Shower Head uses a filter cartridge to reduce the concentration of minerals, such as calcium and magnesium, in the water. This helps to prevent the negative effects of hard water on your skin, hair, and shower fixtures.
How often should I replace the filter cartridge?
The frequency of filter cartridge replacement can vary depending on factors like water hardness and usage. It is recommended to replace the filter cartridge every 3 to 6 months or as indicated by the manufacturer. Regular replacement ensures optimal performance.
Can I use the PureAction SH388 Shower Head with my existing shower setup?
Yes, the PureAction SH388 Shower Head is designed to be compatible with standard shower arms. It can easily replace your existing shower head without the need for additional plumbing modifications.
Does the shower head require any special installation tools?
No, the PureAction SH388 Shower Head typically does not require any special tools for installation. You can usually attach it to your shower arm by hand or with the help of an adjustable wrench if needed.
Can I adjust the water flow and pressure with the PureAction SH388 Shower Head?
Yes, the PureAction SH388 Shower Head usually allows you to adjust the water flow and pressure using the shower handle or faucet controls in your bathroom. The shower head itself does not have a dedicated flow control mechanism.
Is the PureAction SH388 Shower Head suitable for low water pressure?
Yes, the PureAction SH388 Shower Head is designed to work well with low water pressure. It can help improve the showering experience by providing a more consistent and satisfying water flow even in areas with low water pressure.
Does the PureAction SH388 Shower Head come with a warranty?
The availability and details of the warranty can vary depending on the retailer or manufacturer. Check the product packaging or contact the manufacturer for warranty information specific to the PureAction SH388 Shower Head.
Download this PDF link:PureAction SH388 Water Softener Shower Head User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>