KitBest KB002 Floor Bike Pump User Manual ‎

KitBest KB002 Floor Bike Pump

Safety Instructions

WARNING:

• Always read and follow the user instructions before use.
• This equipment should be used on a flat-level surface.
• Do not over-inflate the tires as this could damage the tires or the pump itself
• Keep feet securely on the footrests while inflating

Get To Know Your KitBest Floor Bike Pump

Accessories in the package

• Gas needle
• Screws
• Plastic mounting bracket
• Rubber binding strap

To install your mounting bracket follow these simple steps:

• Remove the water bottle cage mounting screws from your frame.
• Place the bracket against your frame with the curved side facing upwards. (If you are mounting it under a water bottle cage place the cage on top of the bracket.)
• Thread the screws back into the frame.
• Attach the pump to the bracket
• Go for a ride, because you won’t get a flat just sitting in your garage.

Instruction for Tire Inflation

To pump up a tire you must use the correct valve depending on the type of valve your tire has.

• Schrader Valves are used in car and motorcycle tires and wide mountain bike tires. They can be identified by their wide diameter and sprung valve core.
• Presta Valves are narrower valves and are used on thinner-rimmed bike tires

How to use reversible valve head

• Remove the valve cap, rubber valve, and valve insert. ( They may all come out as one when you remove the cap)
• Pull the rubber valve and the valve insert apart and flip them over
• Put them back together and insert them back into the pump and replace the valve cap,
• Your pump is now ready to go

Inflate the tire by following these simple steps:

• Remove the dust cap from the tire valve
• Press the dual Presta/Schrader pump head onto the tire valve as far as it will go, and lift the thumb lock lever to the “locked” position
• Start pumping
• Inflate the tire to desired pressure
• Release the thumb lock lever and remove the pump head from the valve stem
• Replace the dust cap

Feel free to contact us at the email address below if you have any questions or suggestions CS@KitBest.com

DIMENSIONS

WHAT’S IN THE BOX

• Screw
• Glueless Puncture Repair Kit
• needle
• bike tire repair kit
• Mounting Bracket
• User Manual

FEATURES

• Robust and stable
  High-quality aluminum alloy, which is extremely resilient and long-lasting, is used to make KITBEST bike pumps. This bicycle pump’s miniature size is lightweight (200g), making it simple to store in a bicycle bag or attach to a bicycle frame.

• Simple to Inflate
  This bicycle pump’s ergonomic design makes it simple to pump up to 130 psi. Save 30% more time than comparable travel-friendly bike air pumps.

• Simple to install pram tires
  When you take your baby outside, you can easily place the bike air pump on the basket of the baby stroller thanks to its compact size and never be stranded with a flat tire again.

• For Schrader and Presta Valves
  This pump can inflate BMX, mountain, road, and commuter bikes, electric vehicles, motorbikes, sports balls, and swimming rings. It has a switchable valve head that works with Presta and Schrader valves. Additionally, a sports ball needle is supplied for blowing up inflatable balls including basketballs, footballs, soccer balls, volleyballs, air beds, and pool toys.

• Warranty
  lifelong money-back guarantee. If you’re not entirely pleased with our bike pump, just let us know and we’ll give you a full refund or a free replacement without any strings attached.

• Essential Bicycle Accessories
  Bicycle inflator, bicycle pump, bicycle Presta and Schrader valve, bicycle tire pump, and bicycle pump portable

FREQUENTLY ASKED QUESTIONS

a good spray on the pump shaft, and then pump up and down a few times to get the lube to get everywhere in the pump.” image-13=”” count=”14″ html=”true” css_class=””]

DOWNLOAD THE PDF LINK:KitBest KB002 Floor Bike Pump User Manual ‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>