AEG DCK0250HG Ceiling Mounted Range Hood User Manual
- June 10, 2024
- AEG
Table of Contents
AEG DCK0250HG Ceiling Mounted Range Hood
Product Information
This is a user manual for AEG products DCK0250HG, DCK5281HG, DCE5260HM, and DCE5960HM. The manual provides instructions for using the product, care, and maintenance. The product includes a carbon filter and a remote control for easy operation. AEG uses innovative technology to provide advanced features that make your life easier.
Product Usage Instructions
Function
- Turn on the lamp to light up the area.
- Use the remote control to operate the device.
- Replace the carbon filter as needed.
Care and Maintenance
To clean the carbon filter:
- Remove the filter from the device.
- Wash it with water and a mild detergent.
- Rinse it thoroughly and let it dry completely before reinstalling it.
To clean the device:
- Turn off and unplug the device before cleaning.
- Use a soft, damp cloth to wipe the surface of the device.
- Avoid using abrasive cleaners or solvents that could damage the device.
- Do not immerse the device in water or other liquids.
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website to:
- Get usage advice, brochures, trouble shooter, service, and repair information: www.aeg.com/support.
- Register your product for better service: www.registeraeg.com.
- Buy Accessories, Consumables, and Original spare parts for your appliance: www.aeg.com/shop.
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service
Centre, ensure that you have the following data available: Model, PNC, and
Serial Number. The information can be found on the rating plate.
- Warning/Caution-Safety information
- General information and tips
- Environmental information
Subject to change without notice.
SAFETY INFORMATION AND INSTALLATION
WARNING!
Refer to the separate Installation Instructions booklet for Safety Information
and Installation. Read carefully the Safety chapters before any use or
maintenance of the appliance.
PRODUCT DESCRIPTION
Control panel overview
| Function| Description
---|---|---
1| Lamp| Turns the lights on and off.
2| First speed / Off| The motor switches to first speed level. Second press
turns off the appliance.
3| Second speed| The motor switches to second speed level.
4| Third speed| The motor switches to third speed level.
5| Maximum speed| The motor switches to maximum speed level. After 5 minutes
appliance switches to third speed.
6| Filter notification| Reminds to change or clean the charcoal filter and
clean the grease filter.
7| Hob²Hood| Indicator of the function to control hood from hob. For some
models the symbol present on the control panel.
DAILY USE
Using the hood
Check the recommended speed according to the table below.
- While heating up food, cook with covered pots.
- While cooking with covered pots on multiple cooking zones or burners, gentle frying.
- While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or burners.
- While boiling and frying big quantities of food without a lid, big humidity.
It is recommended to leave the hood operating for approximately 15 minutes after cooking.
To operate the hood:
- Press the first speed button to switch on the appliance.
- If needed, press the light button to illuminate the cooking surface. The light is dimmable. Press again the button to change the intensity from:
- Maximum,
- Medium,
- Low,
- Off.
- If needed, change the speed by pressing the desired button.
To turn off the appliance press the first speed button again.
Hob²Hood function
It is an automatic function that connects the hob to a hood. Both the hob and
the hood have an infrared signal communicator. The speed of the fan is defined
automatically on the basis of the mode setting and temperature of the hottest
cookware on the hob. You can also operate the fan using the hob manually. The
function can be activated from a panel of the hob.
For more information how to use the function refer to the hob user manual.
Filter notification
Filter alarm reminds to change or clean the charcoal filter and clean the
grease filter. The filter indicator is turned on for 30 seconds if the grease
filter must be cleaned. The filter indicator flashes for 30 seconds if the
charcoal filter must be replaced or cleaned.
- Refer to cleaning the grease filter in the care and cleaning chapter.
- Refer to cleaning the charcoal filter or replacing the charcoal filter in the care and cleaning chapter.
To activate or deactivate the function:
-
To activate the function press the button for 3 seconds.
If the function is activated, the filter indicator flashes two times. -
To deactivate the function press the button for 3 seconds. If the function is deactivated, the filter indicator flashes once.
To reset the function press the button for 3 seconds.
Remote-control
The appliance is supplied with remote control. The connection is originally enabled.
To connect or disconnect the remote control:
- 1. Switch off the appliance.
2. Press the for 3 seconds.
The indicator on the control panel flashes twice if the function is enabled and once if disabled.
CARE AND CLEANING
Notes on cleaning
-
Do not use abrasive detergents and brushes. Clean the surface of the appliance with a soft cloth with warm water and a mild detergent.
-
After cooking some parts of the appliance can get hot. To avoid stains appliance must be cooled down and dried with clean cloth or paper tow‐els.
-
Clean stains with a mild detergent.
-
Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or another residue may cause a fire.
Follow the instructions for cleaning the accessories when the filter notification is on. Refer to Filter notification in the daily use chapter. -
Grease filters can be washed in a dishwasher.
-
The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance.
-
The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter.
-
The charcoal filter is washable, clean, or regenerate the filter after approximately every two months. Refer to the leaflet included in the accessory.
Cleaning the grease filter
Filters are mounted with the use of clips and pins on the opposite side.
To clean the filter:
-
Pull the cover to open it.
-
Press the handle of the mounting clip on the filter panel underneath the hood (1).
-
Slightly tilt the front of the filter downwards (2), then pull. Repeat the first two steps for all filters.
-
Clean the filters using a sponge with non-abrasive detergents or in a dishwasher.
The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance. -
To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.
Cleaning the charcoal filter
To remove the filter:
- Remove the grease filters from the appliance. Refer to “Cleaning the grease filter” in this chapter.
- Remove the clips holding the filter bed (1), then the filter bed (2).
- Wash the filter bed in hot water without using detergent or use a dishwasher.
- Set the dishwasher without using rinse aids or any other detergents. The dishwasher cannot be filled with dishes.
- Leave the filter bed to dry or use an oven.
- Set the oven for 7 minutes at a maximum temperature of 60°C.
- To install the filter, perform the steps in reverse order. The filter has to be fully dried before installing it back into the appliance.
Replace the filter bed every 2 years or when the cloth is damaged.
Replacing the lamp
This appliance is supplied with a LED lamp. This part can be replaced by a
technician only. In case of any malfunction refer to “Service” in the “Safety
Instructions” chapter.
GUARANTEE
Customer Service Centres
Point of Service
Morgenstrasse 131
3018 Bern
| Service-Helpline
0848 848 111
service@electrolux.ch.
Langgasse 10
9008 St. Gallen
Am Mattenhof 4a/b 6010 Kriens
Schlossstrasse 1
4133 Pratteln
Comercialstrasse 19
7000 Chur
- Spare parts service Industriestrasse 10, 5506 Mägenwil, Tel. 0848 848 111
- Specialist advice/Sale Badenerstrasse 587, 8048 Zürich, Tel. 044 405 81 11
Warranty
For each product, we provide a two-year guarantee from the date of purchase or delivery to the consumer (with a guarantee certificate, invoice or sales receipt serving as proof). The guarantee covers the costs of materials, labour, and travel. The guarantee will lapse if the operating instructions and conditions of use are not adhered to, if the product is incorrectly installed, or in the event of damage caused by external influences, force majeure, intervention by third parties or the use of non-genuine components.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol household waste. Return the product to your local recycling facility or contact your municipal office.
For Switzerland:
Where should you take your old equipment?
Anywhere that sells new equipment or hands it into official SENS collection
points or official SEN recycling firms. The list of official SENS collection
points can be found at www.erecycling.ch.
www.aeg.com/shop.
References
- Welcome to AEG
- AEG Accessories & Spare Parts Homepage
- SENS eRecycling – Stiftung für Recycling von Elektro- und Elektronikgeräten
- Home | AEG Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>