Voltsmile V5 V Series LFP Low Voltage Rackmount Battery Owner’s Manual
- June 10, 2024
- Voltsmile
Table of Contents
Voltsmile V5 V Series LFP Low Voltage Rackmount Battery
Product Information
The product is an electrical appliance that requires basic safety precautions to be followed during usage. It has the following specifications:
- Voltage: 51.2V
- Capacity: 100Ah
- Weight: 42kg
- Discharge voltage: 46.4~57.6V
- Charge voltage: 56.8~57.6V
- Charge current: 100A max
- Discharge current: 100A max
- Peak charge/discharge current: 120A @ 10sec
- Depth of discharge: 95%
- Communication: RS485/RS232/CAN
- Charge temperature: 0~50°C/23~122°F
- Discharge temperature: -20~50°C/-4~122°F
- Shelf temperature: -20~60°C/-4~140°F
- Humidity: 5%~95% (RH)
- Protection rating: I
- IP rating: IP20
Product Usage Instructions
Before using the product, please ensure to follow the basic safety precautions listed below:
- Keep dry
- Keep cool
- Avoid opening the product
- For indoor use only
To use the product, follow the steps below:
- Connect the negative and positive terminals to the appropriate power source.
- Ensure that the voltage and capacity settings are appropriate for your intended use.
- Use the DIP switch to set the desired status.
- Use the power switch to turn the product on or off.
- Use the testing port to ground the product.
- Use the inverter data link uplink terminal to connect with an inverter.
- Use the downlink terminal and data terminal to connect with other devices.
- Monitor the charge indication to ensure proper charging.
If you encounter any issues or alarms, refer to the indication section of the user manual for troubleshooting steps.
Dear customer
Congratulations, and thank you for purchasing Voltsmile products! Your
decision will greatly help to green our environment and energy structures
while saving on your energy bill and saying goodbye to blackouts. Every
Voltsmile product receives thorough tests and inspections before leaving our
factory to ensure all our products are maintenance-free and reliable through
decades of their lifetime. Disappearing in your life while saving money,
unnoticeable while making sure your home stay connected.
When using electrical appliances, basic safety precautions should always be followed, including the followings:
OVERVIEW
SPECIFICATIONS
- Voltage(V) : 51.2
- Capacity (Ah): 100
- Weight (kg): 42
- Discharge voltage (V): 46.4 ~ 57.6
- Charge voltage (V): 56.8 ~ 57.6
- Charge current(A): 100 max
- Discharge Current (A): 100 max
- Peak charge/discharge current (A): 120 @ 10sec
- Depth of discharge: 95%
- Communication: RS485 / RS232 / CAN
- Charge temperature: 0℃ ~ 50℃ / 23℉ ~ 122℉
- Discharge temperature: -20℃ ~ 50℃ / -4℉ ~ 122℉
- Shelf temperature: -20℃ ~ 60℃ / -4℉ ~ 140℉
- Humidity: 5% ~ 95% (RH)
- Protection rating: I
- IP rating: IP20
- Altitude: <4500m
- Designed life: 10 years+
- Life cycle: 6000+
Warning
Installation and maintenance should only be carried out by trained
professionals. We do not undertake any consequences or related responsibility
because of violation of safety operation or violation of design, production
and equipment safety standards.
- After unpacking, please check the product and packing list first. If the product is damaged or missing parts, please get in touch with your local dealer.
Packing list
- Voltsmile V5
- Positive power connecter
- Negative power connecter
- Data link cable
- Grounding wire
- Grounding screw
- Contact Terminal
- User manual
- warranty card
- Check the battery.
- Make sure batteries are turned off before installation.
- Secure the batteries in fixed place, preferably on a server rack.
- Connect power cables and data cables.
- Make sure the all the DIP switch are in the correct position.
- Connect to interver’s battery terminals and data port.
Battery position
Cable pinout
Status LED
- On: Normal
- Blink: Warning
- Off: Error
In case a battery (in normal condition or damaged) needs disposal or needs recycling, it shall follow the local recycling regulation (i.e. Regulation (EC) Number 1013/2006 among European Union) to process and use the best available measures to achieve relevant recycling efficiency.
- It is required to charge the battery at least once every six months. For this charge, maintenance ensures the SOC is higher than 90%.
- The connection of the power connector, grounding point, power cable, and screw is suggested to be checked yearly. Ensure there is no loose, broken, or corrosion at the connection point. Check the installation environment, such as dust, water, insect, and more, to ensure it is suitable for the IP20 battery system.
- If the battery is stored for a long time, it must charge every six months, and the SOC should be higher than 90%.
References
Pages: 1 2