POYAL PEM201 Remote Control User Manual
- June 10, 2024
- POYAL
Table of Contents
POYAL PEM201 Remote Control
Product Information
PEM201 Remote Control
Product Introduction
The Poyal PEM 201 wall switch is an 86-type single-button curtain control
product. It is designed for users who do not want to wire the wall and can
install it at a distance or in a dark box. This product can easily control the
Poyal curtain system with just one button.
Product Technical Data
- Code button
- Close Stop Open
- Indicator light
Warning
Please ensure that you read the instructions carefully before installation.
Any modifications not expressly approved by the manufacturer may void the
user’s authority to operate the equipment.
Packing List
- Switch*1
- PE bag*1
- Instruction*1
- Rear base*1
PEM202 Remote Control Manual
Product Introduction
The Poyal PEM 202 wall switch is an 86-type dual-button curtain control
product. It is designed for users who do not want to wire the wall and can
install it at a distance or in a dark box. This product can easily control the
Poyal curtain system with just one button.
Technical Data
- Code button
- Close Stop Open
- Indicator light (x2)
Warning
Please ensure that you read the instructions carefully before installation.
Any modifications not expressly approved by the manufacturer may void the
user’s authority to operate the equipment.
Packing List
- Switch*1
- PE bag*1
- Instruction*1
- Rear base*1
Product Usage Instructions
- Remove the switch from the packing list and ensure that all parts are present.
- Choose a location to install the switch. It should be installed at a distance or in a dark box.
- Connect the switch to the Poyal curtain system.
- There are three buttons on the switch – Code, Close, Stop, and Open. Press the Code button to sync the switch with the curtain system.
- Use the Close button to close the curtains, Stop to stop the curtains in their current position, and Open to open the curtains.
- If you have purchased the PEM202 model, it has two additional indicator lights. These lights indicate which button has been pressed.
- Ensure that you follow all safety precautions mentioned in the manual before installation.
PEM201 Remote Control
Product introduction
Poyal PEM 201 wall switch is a 86-type single-button curtain control product. Users do not need wiring in the wall, and can stall it at a distance or in a dark box. It can control the Poyal curtain system with one button.
Technical data
- Power: 3V（CR2032）
- Frequency: 433.92MHz
- Working current: ≤20mA
- Working temperature: -20℃ ~ +60℃
- Product size: 86 86 16.8mm
- Battery specification: CR2032*1
Warning
- Keep away from moisture and impact to extend the service life.
- Check whether the battery needs to be replaced, when it becomes less sensitive.
- Press any button for more than 10 seconds, the wall switch will stop sending wireless signals.
- Please dispose of used batteries properly.
Packing list
PEM202 Remote Control
Product introduction
Poyal PEM 202 wall switch is an 86-type dual-button curtain control product.
Users do not need wiring in the wall and can stall it at a distance or in a
dark box. It can control the Poyal curtain system with one button.
Technical data
- Power: 3V（CR2032）
- Frequency: 433.92MHz
- Working current: ≤20mA
- Working temperature: -20℃ ~ +60℃
- Product size: 86 86 16.8mm
- Battery specification: CR2032*1
Warning
- Keep away from moisture and impact to extend the service life.
- Check whether the battery needs to be replaced, when it becomes less sensitive.
- Press any button for more than 10 seconds, the wall switch will stop sending wireless signals.
- Please dispose of used batteries properly.
Packing list
EU DECLARATION OF CONFORMITY
in accordance with Annex VI of Directive 2014/53/EU of the European Parliament and of the Council
-
For the following Radio equipment:
- Product name / Number (s): Remote Control / PEM202, PEM201
- Trade name or Brand: POYAL
- Software / Hardware number: V4.0/V1.0
-
Name and address of the manufacturer: Zhejiang General Light Curtain Co.,LTD. Manufacturer: Xin Tang Tou Village, Xin Jie Town, Xiao Shan District,HangZhou City, Zhe Jiang Province, China.
-
This declaration of conformity is issued under the sole responsibility of the Manufacturer.
-
Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):
-
The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)
-
References to the relevant harmonized standards used or references to the other technical specifications in relation to which conformity is declared:
-
Article 3.3:N/A
-
Article 3.2:
ETSI EN 300 220-1 V3.1.1 (2017-02)
ETSI EN 300 220-2 V3.2.1 (2018-06) -
Article 3.1b:
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.1.2 (2021-03) -
Article 3.1a Health:
EN 50663:2017 -
Article 3.1a Electrical Safety:
EN IEC 62368-1:2020+A11:2020
IEC 62368-1: 2018
-
-
Notified Body Name: Eurofins Electrical and Electronic Testing NA, Inc.
- Notified Body Number: 0980
- Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3
- Technical File Identification Number: N/A
-
Where applicable, a description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity: User instructions are provided in the User Manual. The Software and Hardware versions are specified above.
-
Additional information:
Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum. Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorization of use. Please refer to the User Manual for details.
On behalf of:
Date 2025-05-09
Signature
- Name: Lei guo
- Title: Manager
- Manufacturer: Zhejiang General Light Curtain Co., LTD.
- Address: Xin Tang Tou Village, Xin Jie Town, Xiao Shan District, HangZhou City, Zhe Jiang Province, China.
CE Maintenance
- EUT Operating temperature range: -20° C to 40° C .
- Input: 3V（CR2032）
- The device complies with RF specifications when the device used at 5mm from your body.
- Operating frequency: 433.92MHz
- Max. Transmitting Power :-14.22 dBm
Declaration of Conformity
Zhejiang General Light Curtain Co.,LTD. hereby declares that this Remote
Control is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.In accordance with Article 10(2) and
Article 10(10),This product is allowed to be used in all EU member states.
- Importer: XXXXXX
- Importer Address: XXXXXX
FCC STATEMENT WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>