HUIPANG S1001 Parent Child Student Machine Portable Economical Multifunctional Table Tennis Robot User Manual

: June 10, 2024
: HUIPANG

Table of Contents

HUIPANG S1001 Parent Child Student Machine Portable Economical
Product Information
Product Usage Instructions
Technical Parameters
Standard Accessories
Installation
Function Introduction
- Oscillation range
Fault Handing
FCC Caution
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUIPANG S1001 Parent Child Student Machine Portable Economical

Multifunctional Table Tennis Robot

Product Information

The device complies with part 15 of the FCC Rules. The FCC ID for the device is 2A4HT-S1001.

Product Usage Instructions

Before using the device, please ensure that you have read and understood the user manual. Follow the below instructions to use the device:

Ensure that the device is fully charged before use.
Turn on the device by pressing the power button.
Follow the on-screen instructions to set up the device.
Once set up is complete, you can use the device for its intended purpose.
When not in use, turn off the device and store it in a safe place.

If you experience any issues with the device, please refer to the troubleshooting section of the user manual or contact customer support for assistance.

Technical Parameters

G.W :5.1KG
N.W :4 KG
Packing Dimensions : 41 36 32CM
Rated Voltage : 100-240V
Rated Power :36W
Spin : Topspin, Backspin, non-spin, left and right sidespin Serving Frequency :32-80/Min
Serving Speed 4-40m/s
Minimum Ball Capacity : 120 balls
Maximum Ball Capacity : 10 balls
Point of fall : Random
Colors : Black

Can serve 9 spin balls and 1 non-spin ball Can be up and down to adjust the radian Can be left and right to adjust the spin ball Can serve different spin balls and long short balls

Standard Accessories

A · Main engine
B · Ball storage bucket
C · Robot heads(A & B)
D · Ball cover
E · Power
F · Remote control
G · Iron support
H · Using manual

Installation

Unpack and check the accessories
Connect the robot head A and B to the main engine
Fix the ball storage bucket to the main engine and rotate to fix it.
Connect the USB line of robot head A to the port of the main engine.
Connect the USB line of robot head B to the port of the main engine.
Link the power line .
lnstall the iron support
Finish.

Note : Make sure to link well or the machine can’ t work correctly.

Function Introduction

Remote control instruction

Oscillation range

Tips When When it the works oscillation with the speed adjusting is, it is is designated random. to serve

Robot head A&B can be adjusted separately.

Serve Type Diagram

Serve type : Can serve ball directly and indirectly
Indirectly type : With a proper speed and spin ,it is much more suitable for beginners to practice different skills of serving and receiving balls
Directly type : Compare with indirectly type ,it is stronger on its speed and spin. At a proper speed and spin ,it can give loop, smash ,lob etc_

Adjusting the speed of top-wheels &bottom-wheels and the direction of the robot heads can rotate the robot. Robot can serve 9 spin balls and 1 non- spin.The head can oscillate between 180 angles(horizontal line).

Position : The rotation of top-wheel is top spin, of the bottom-whell is the under spin.With the same position is non-spin.
Position : The rotation of top-wheel is left spin, of the bottom-whell is the right spin.With the same position is non-spin.
Position : The rotation of top-wheel is right spin, of the bottom-whell is the left spin.With the same position is non•spin. Adjust two wheels and speed between 1 to 2 or among 1 to 3 ,can combine different kinds of spins.

Put the ball cover on the ball mouth A or B

If the ball mouth Bis covered, the ball mouth A is serving.

Random Robot head A and B are oscillation.
Backhand two jump ,Forehand one-point : Robot head A and B are not oscillation.
Backhand one -point, Forehand different points: Robot head A are not oscillation and Bis oscillation.
Two points practice, top-spin and under-spin can be set.
Random Robot head A and Bare oscillation.
Point A is left sidespin ,Point Bis right sidespin. Spin can be set.
Two points long short balls practice Robot head A and Bare not oscillation. (The top-spin and under-spin of both robot heads can be set)
Two points and two jump ball, top-spin and under-spin can be set.

Fault Handing

Warning

Children must use the robot correctly by the guide of adults or parents.
Use the standard 40 mm balls. You can choose HUI PANG, OHS, Double Fish training balls or other more than one star balls. Please don’t use the balls that are too soft or irregular to avoid clamping balls.
Clean the ball groove regularly to avoid clamping balls.(Because the force of friction of the ball groove will increase by using it)
Clean the new balls with clear water or cleaning agent and dry them before you use them. And clean the balls and the ball groove termly to keep the machine clean and reduce the failure.
Add the balls to the storage tube when the machine is off to avoid clamping balls.
If you don’t use the robot in a long time ,please clean it up and with good storage bags.
If you have any problems ,please contact our after-sale service.

Please use robot in clean environment, clean the dust and wash the balls in a certain time.

In the case the driving wheel is not working and not deliver balls, after troubleshooting, might you need to exchange the motor; in the case that the driving wheel is demanged or out of shape, might you need to exchange the driving wheel.

Exchange Driving Wheel

Check which driving wheel is de manged.
Disassemble 4 screws from side board.
Disassemble the screw from the driving wheel, take out the demanged wheel.
Take a new wheel, and put it inside follow the process before.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

From “To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 0cm the radiator your body: Use only the supplied antenna.”To:“This equipment has been evaluated to meet the FCC general RF exposure requirement.The device can be used in portable exposure condition without restriction.”