avide ALBLWW-30W LED Batten Light User Manual
- June 10, 2024
- Avide
Table of Contents
avide ALBLWW-30W LED Batten Light
WHAT’S INCLUDE
Product Usage Instructions
- Ensure that the power supply to the light is switched off before installation.
- Fix the light to the ceiling or wall using the provided screws and brackets.
- Connect the wires from the power supply to the light’s wires using the provided connectors.
- Switch on the power supply and test the light.
- If the light is not working, switch off the power supply and check the connections.
Note: This product has double insulation and is not connected to an earth wire. Do not attempt to ground the product.
If you require technical or warranty support, please contact the authorized representative.
Warning: This product has a Protection Class II rating, which means that it has reinforced or double insulation equal to the nominal insulation voltage between active and accessible parts. The parts under voltage are isolated from the contact surfaces so that in case of failure, dangerous voltage cannot occur.
Safety instructions
- Before starting installation work, make sure to disconnect the power, or the power cable from the main.
- The assembly, installation and maintenance of electrical installations may only be performed by qualified person.
- When drilling the holes for the installation, make sure the pipes and wires in the wall are not damaged.
- Damaged products are not allowed to put into operation! There is a risk of electric shock!
- In case of any damage, disconnect the product from the main – immediately.
- Maintenance and repairs must be performed by a qualified person, otherwise the warranty expires.
- The lamp is only approved for its intended use. Technical changes are not allowed.
- Lamps may not be covered! RISK OF FIRE!
- The minimum distance of the lamp to the illuminated surface is >= 0.5m
- The lamps and accessories contain small parts. Keep them away from children.
- The manufacturer assumes no liability for damages incurred as a result of improper use.
- Power off the luminaire before cleaning! Use a slightly moistened cloth to clean the outer surface of the luminaire.
- Do not use any aggressive cleaners. Avoid getting water inside the product and on the electric components!
Class II: A Class II or double-insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth (ground).
DIMENSION
INSTALLATION
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
This product contains a light source of energy efficiency class: see table or label. The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
For technical or warranty support, please contact the authorised representative:
Bramcke GmbH
52353 Düren
An Gut Nazareth 18A
Germany
www.bramcke.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>