REXYN PWR-ST-GR2000 Series Easy Applicator Power Station User Guide

REXYN PWR-ST-GR2000 Series Easy Applicator Power Station

Product Information Easy A Power Station

Series and Models

Series: PWR-ST-GR2000

• Model : RX-EA-PWR-ST-GR2000-AUS
• Model : RX-EA-PWR-ST-GR2000-USA
• Model : RX-EA-PWR-ST-GR2000-UK
• Model : RX-EA-PWR-ST-GR2000-EU

Features

• AC Output
• DC Charge Input
• PV Input
• LCD Display
• AC On/Off Button
• USB On/Off Button
• DC On/Off Button
• Cigar Output
• Type-C Output
• USB Output
• Short-Circuit Protection
• Overpower Protection
• Automatic Shutdown

Charging

The Easy A Power Station should be charged before use using the AC adaptor provided. To charge:

1. Attach the DC charge cable to the power station.
2. Attach the plug to the mains power socket in the wall.
3. Make sure that the power station is fully charged – the display should indicate 100%.

Usage Instructions

To switch on the power station:

1. Press the power on/off button.
2. The display will be illuminated indicating that the power station is ready.

To switch off the power station:

1. Press the power on/off button for 3 seconds.
2. The display will fade indicating that the power station has been switched off.

Using AC electrical devices & appliances

1. Attach the power plug of the device to the plug socket on the power station.
2. Press the AC output button for 2 seconds to switch on/off the inverter.
3. When the AC power output is lower than 5W for up to 3 hours, the inverter will automatically turn off to save energy.

Using electrical devices & appliances with a USB cable

1. Attach the USB cable of the device to the USB socket on the power station.
2. Press the USB output button for 2 seconds to switch on/off the inverter.
3. When the USB power output is lower than 1W for up to 1 hour, the USB ports will automatically turn off to save energy.

Important Notes:

• The power station can accommodate TWO (2) devices at the same time. A multi-plug adaptor should not be used to attach more than 2 devices.
• The power station can accommodate THREE (3) USB Type-A cables and ONE (1) USB Type-C. Do not use a USB multiport hub to connect more devices.
• The power station has a capacity of 2000W. If the capacity is overloaded and/or breached with more devices than the power station is capable of accommodating, the power station will shutdown to recover from the short-circuit or overpower protection.

USING ELECTRICAL DEVICES & APPLIANCES WITH A USB CABLE

1. Attach the USB Cable of the Device to the USB Socket on the Power Station
2. Press the USB OUTPUT BUTTON for 2 seconds to SWITCH ON/OFF THE INVERTOR

When the USB Power Output is lower than 1W for up to 1 Hour, the USB Ports will AUTOMATICALLY TURN OFF to save energy

ATTENTION
The Power Station has a Capacity of 2000W. If the Capacity is overloaded and / or breeched with more Devices than the Power station is capable of accommodating, the Power Station will SHUTDOWN to recover from the Short- Circuit or Overpower Protection.

Download a Copy with your Phone or Tablet

LtdRexyn Ltd – P O Box 226Prescot – Merseyside L34 1WDEngland – UKEmail: info@rexyn.co

References

• Airpod and Easy Applicator Home - Technically the most advanced Patient Lateral Transfer and Repositioning System in the World

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>