BUFFALO TOOLS GSORSET Base Scaffolding Unit User Manual
- October 30, 2023
- Buffalo Tools
Table of Contents
**Assembling ITEM# GSORIG Outriggers to Scaffolding *
(4 piece set ITEM# GSORSET)
User Manual
**
GSORSET Base Scaffolding Unit
Attach the Plate to the bolt, and tighten it with the Handle. Repeat on all
four support legs.
The outriggers and steel bolts are placed OUTSIDE the leg of the GSSI.
DO NOT insert the steel bolts into the holes of the GSSI support leg.
WARNING
Be certain that all Outriggers are securely tightened.
Double check that each bolt has been secured before using the scaffold.
Use Guard Rails & Outriggers When Stacking Units. Lock CastersBefore Climbing
Onto Scaffold.
- The GSORIG does NOT include wheels.
When stacking the GSSI to make a two- story unit, remove the wheels from the top unit and place on the outside of the GSORIG. (The wheels are “shared” with the stacked unit).
If additional wheels are required, please contact your local retail store.
NOTE
Attach the Outrigger using a two-piece clamp set, which consists of a Plate
and a Handle
WARNING
Use Guard Rails & Outriggers When Stacking Units. Lock Casters Before
Climbing Onto Scaffold.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT
OPERATE THIS PRODUCT!
If you experience a problem or need parts for this product, visit our website
www.buffalotools.com or call our customer
service at 1-636-532-9888, Monday-Friday, 8 AM – 4 PM Central Time. A copy of
the sales receipt is required.