PHILIPS RC048B Smart Direct Panel Ceiling Light Installation Guide

PHILIPS RC048B Smart Direct Panel Ceiling Light

Product Information

The product is a LED panel light with the following specifications:

• Model: RC048B
• LED Type: LED38S/865 (for first variant), LED38S/840 (for second variant)
• Power Supply Unit (PSU): Built-in
• Dimensions: W60L60 for first variant, W30L120 for second variant
• Color Temperature: 6500K (for the first and second variants) and 4000K (for the third variant)
• Luminous Flux: 3800 lm
• Weight: 42 grams

The product is manufactured by Luminaires (Shanghai) Co., Ltd. and is compliant with QC standards.

Product Usage Instructions

1. Choose the appropriate location for the LED panel light installation. Ensure that the area is clean, dry, and free from any obstructions.
2. Remove the LED panel light from its packaging.
3. Connect the LED panel light to a power source that is compatible with the product’s specifications (220-240V, 50/60Hz).
4. Mount the LED panel light on the ceiling or wall using the appropriate mounting hardware.
5. Turn on the LED panel light and adjust the brightness as needed using a dimmer switch (if available).
6. If necessary, replace the LED panel light after its lifespan has expired or if it becomes damaged.

Note: Installation and maintenance should only be performed by qualified professionals to ensure safety and compliance with applicable regulations.

FEATURES

 |  |  |  |  |  |  |  |
---|---|---|---|---|---|---|---|---

RC048B LED38S/865 PSU W60L60 2IN1W PCV

| 595×595×34| 42| 6500| 42| 3800| 220-240| 50/60Hz| 1.8

RC048B LED38S/865 PSU W30L120 2IN1W PCV

| 295×1195×34| 42| 6500| 42| 3800| 220-240| 50/60Hz| 1.9

RC048B LED38S/840 PSU W60L60 2IN1W PCV

| 595×595×34| 42| 4000| 42| 3800| 220-240| 50/60Hz| 1.8

Dimension

PARTS

Plaster ceiling set

• 911401824580
• RC048Z SMB-PLC

Suspension set

• 911401824680
• RC048Z SME-2

Surface mounted set

• 911401867182:Panel SMB W60L60 H7
• 911401867282:Panel SMB W30L120 H7

Safety cable

• 911401824780
• RC048ZSC

INSTALLATION INSTRUCTIONS

• Visible Profile Ceiling Mounting(VPC) Tipe pemasangan plafon terbuka.

• Plaster Ceiling Version Mounting (PCV)

• Pemasangan versi plafon dengan plester

• Cutout size: /Ukuran potong :

• W60L60: 580×580 (+/-2)

• W30L120: 280×1180 ( +/-2 )

• W60L120: 580×1180 ( +/-2 )

• Ceiling thickness/Ketebalan plafon : 8mm-16mm

• These 4 clips are not included in the package and could be ordered by separate I 2NC.

• 4 Baut tidak termasuk ke dalam paket penjualan, dapat dipesan dengan kode I 2NC terpisah. 17 8mm-16mm 141 911401824580: RC048Z SMB-PLC.

Wiring Method/Metode pemasangan kabel

• Please use IP20 or the higher terminal box (Dimen sion should be I Ox20x25 or higher.) It is not included in the package.
• Mohan gunakan kotak terminal dengan IP20 atau lebih tinggi (dimensi harus 10x20x25 atau lebih besar) tidak termasuk dalam kemasan.

Suspension Mounting (SUS)/Pemasangan suspensi

• The suspension wires are not included in package,could be ordered by separate 12NC. Kabel suspensl tldak tennasuk dalam kemasan penjualan, dapat dipesan dengan kode 12NC terpisah. 911401824680 : RC04BZ SME-2

Safety cahle/Kawat pengaman

• The product should Install a safety cable (The safety cable Is not lnclulded.) could be ordered by separate llNC. Produk harus dipasang dengan kawat pengaman (termuuk tipe pemasangan A & B) (kawat pengaman ddak termuuk dalam kemuan), dapat dipesan dengan kode I lNC terpisah. 911-401824780: R.C048Z SC.

Please read this manual carefully before using the product.

1. For indoor use only.

2. Do not switch on before completing the installation.

3. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or national requirements.

4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his
   service agent or a similarly qualified person in order to avoid a hazard.

5. The luminaire shall not be covered with thermal insulation or similar material under any circumstance.

6. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

7. The luminaire complies with IC 60598.

8. The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc. must be avoided during use and storage.

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Signify Luminaires (Shanghai) Co., Ltd.

• 2F, Building I, No.2555, Hechuan Road, Minhang District,
• Shanghai City, P.R.China
• China Postal code: 200233

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>