SONOS RAY Compact Soundbar for Music and TV User Guide

SONOS RAY Compact Soundbar for Music and TV

The compact soundbar for music, TV, and more

• Quick and easy setup, with only one cable to connect to your TV.
• Stream sound for compact spaces-versatile design allows you to set it on a credenza, mount it on a wall, or place it inside a TV stand.
• ream music, radio, podcasts, and more when the TV is off.
• Expandable. Add a Sub and two Sones speakers, like Ones, for 5.1 surround sound.
• Control your Sones system with the Sonos a1u! (for Android and iOS).
• See Setua when you’re ready to add Ray to your Sones system.

Overview

Controls and lights

Volume control

Touch for small adjustments or touch and hold to quickly change the volume

• Volume up (right)
• Volume down (left)
  Note : You can also use the Sones app or your TV remote.

Play/Pause
Touch to play or pause audio.

Next/Previous (music only)

• Swipe right across the touch controls to skip to the next song.
• Swipe left to go to the previous song.

Note: You can’t skip forward or go back when listening to a radio station.

Status light
Displays the product’s connection to WiFi, indicates when the volume is muted, and signals errors.

Connector panel

1. Join button Press to connect during setup.
2. AC power (mains) input  Use only the supplied power cord (using a third-party power cord will void your warranty).
3. Optical port Use it to connect the soundbar to your TV.
4. Ethernet port Use an Ethernet cable if you want to connect to a router, computer, or network­attached storage (NAS) device (optional).

Select a location
You can wall mount Ray above or below your TV, or place it in or on a TV stand.
TV stand placement

• Place horizontally on a stable and level surface at least 2″ (50mm) from the TV.
• Don’t place it vertically or on its side.
• Don’t block the TV’s IR sensor.
• If put on a shelf, place at the front and keep 2″ (minimum) clearance on both sides for the best sound quality.
• Keep 1″ (25mm) space (minimum) above Ray so you can reach the touch controls.
• For best sound quality, keep both ends of Ray at least 1″ (30cm) from a wall or other obstruction.
• Make sure the touch controls are facing up.

Wall mount
You can secure the soundbar to a wall with a compatible wall mount. We recommend the custom­designed Sonos Ray Wall Mount (sold separately). See Wall Mount for more information.

Connect the cables

Before you start

• Connect any external devices, like a cable box or DVD player, directly to your TV.

•  Turn your TV on.

  • Connect the power cord and plug in the soundbar.
    Note: Use only the supplied power cord (using a third-party power cord will void your warranty).

  • Connect the optical cable (included) to the optical port on the back of your soundbar.

  • Connect the optical cable to your TV’s optical digital OUT port.

  • (The TV’s optical adapter’s port is “D­shaped” -make sure the connector aligns correctly with the port. Inserting the adapter incorrectly may damage the cable.)

Product settings

You can customize Sonos products for your surroundings. Go to¢, > System and select

Home theater
Sanos products for your TV provide full-theater sound and play music too. Create a home theater system by adding a pair of rear surrounds and a Sub.

Home theater settings
Use the Sanos app to adjust sound settings or change the way your home theater speaker works with your TV.

Set up surround speakers

It’s easy to turn two Sones speakers (same model). or a Sones Amp and your favorite non-Sones speakers, into separate right and left channels for your home theater.

1. Place each surround speaker about 10ft from your favorite listening position, angling them toward the seating area.
2. Go to◊ > System.
3. Select a room with a soundbar and choose Add Surrounds to get started.

Note: If you group the rooms or create a stereo pair instead, you won’t have surround sound.
Learn more

Surround audio settings
During setup, surround sound is optimized for your room. These settings are adjustable:

Trueplay
Every room is different. Trueplay tuning measures how sound reflects off walls, furnishings, and other surfaces in a room, then fine-tunes your Sanos speaker to make sure it sounds great no matter where you’ve placed it. Trueplay works on iOS mobile devices running iOS 8 or later. During tuning, you’ll move around the room holding your mobile device.

1.  Select¢, > System, and pick the room you want to tune.
2.  Choose Trueplay Tuning to get started.

Note: Trueplay tuning isn’t available if VoiceOver is enabled on your iOS device. Turn VoiceOver off in your device settings before tuning your speakers.

Auto Trueplay
Portable Sonos products like Sanos Roam and Move can tune themselves automatically. Auto Trueplay uses your speaker’s microphone to detect the environment and make periodic tuning adjustments so you get great sound wherever your speaker is and whatever you’re listening to. Go to¢- > System, and select your portable speaker to turn on auto Trueplay.

Accessories
Find the perfect accessory for your Sonos system to perfectly fit your Sonos products. For a full selection of Sanos-compatible stands, wall mounts, chargers, and cables see Accessories on our website.

Wall mount
Use the Ray wall mount kit (sold separately, available at sonos.com). It’s designed for mounting
What you’ll need

• Pencil
• Phillips-head screwdriver
• Power drill (if needed for installation location)
• Measurement tool
• Level
• Stud finder (optional)

Set it up

1. If your TV is wall-mounted, align the top edge of the bracket with the bottom of your TV, leaving at least 2.5 inches (mm) between them.
2. Mark the screw locations and remove the bracket.
3. If you’re using wall anchors, use a 5/16″ drill bit to drill pilot holes, starting with the hole on the left. Then insert the wall anchors, Don’t use wall anchors if you’re drilling into wood or plastic. See Wall mounting information,
4. Position the wall mount bracket over the screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the center notch is pointing up.
5. Using a Phillips head screwdriver, fasten the 2 attachment screws to the back of the soundbar, making sure they are fully tightened.
6. Remove the protective cap from the optical cable, then connect the power and optical cables to the back of the soundbar.
7. Slide the soundbar down so the attachment screws fit into the slots on the wall bracket. Make sure the touch controls are facing up and Sonos Ray is fully seated.

Specifications

Important safety information

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sones products.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. This product does not have any user-serviceable parts. Do not open or disassemble or attempt to repair it or replace any components. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>