Hawpet SD-01 Ultrasonic Dog Deterrent User Manual
- June 10, 2024
- Hawpet
Table of Contents
Hawpet SD-01 Ultrasonic Dog Deterrent
Product Information
This device complies with part 15 of the FCC Rules, which means that it has been tested and found to meet the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. The purpose of this compliance is to ensure that the device does not cause harmful interference to other devices operating in the same frequency range.
Conditions of Operation
Operation of this device is subject to the following two conditions:
- This device may not cause harmful interference to other devices.
- This device must accept any interference received, including interference that may cause undesired operation.
It is important to note that any changes or modifications to the device that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Product Usage Instructions
When using this device, it is important to ensure that it is not causing harmful interference to other devices in the area. If you notice that your device is causing interference, you should stop using it immediately and contact customer support for assistance.
In addition, if you experience interference from other devices while using this product, it is important to continue using the device as intended and not attempt to modify or change its operation in any way.
To ensure continued compliance with FCC regulations, it is recommended that you only use accessories and components that are approved by the manufacturer for use with this device. Any modifications or changes to the device could result in non-compliance and void your authority to operate the equipment.
Less than Thrilled
Smile! Keep your device and we’ll issue a full refund or replacement,
whichever makes you HAPPIEST!
If you have any issues or concerns, we’re here to help:
service@hawpet.com
WE MAKE IT BE HAPPY!
What Can You Get?
- Dog Barking Control Remote X 1
- Charging Cable X 1
- Wrist Strap X 1
- Manual X 1
Ultrasonic Distance: 5 meters
Dog barking control devices emits an ultrasound of 20~25 KHZ ultrasonic waves.
When using it, Don’t put it close to the ear, And don’t let the kids use it as
a toy, so as not to hurt the ear.
OVERVIEW
Ultrasonic Training Mode:
Send ultrasonic waves to disturb dogs
Ultrasonic Plus Flashlight Modes:
- Press once for short-flashing and ultrasonic emission
- Hold down – For more challenging situations.
CHARGING
While charging the battery, the charging light blinks. until charging light off, fully charged
Time of uninterrupted working in the
Time of uninterrupted working in the
When the LED indicator goes red-Battery is discharged. For battery protection the device turns off in 5 seconds automatically.
Frequently Asked Questions
Q1: Does Ultrasonic Affect Other Animals?
A1: It’s not impacted other animals as long as they are out of 25 feet
range. Household bets like cats and birds are not affected.
Q2: Will this hurt my other dogs who aren’t reactive barkers?
A2: While it will not harm your other pets, this is a training device, so
separating your already trained dogs from your reactive barker is advisable to
avoid confusion. 25 feet is all that’s required.
Q3: Why is Hawpet most effective with dogs age 6 months to 8 years?
A3: Age-related hearing loss makes it challenging for dogs over age 8 to
hear and react. Before 6 months, a puppy’s auditory system is not developed
enough to fully understand the impact, so we err on the side of caution and
recommend you onlv use it at 6 months or older.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>