YOUKAIN HDLP-2091712 12-Light Bronzed Finish Candle Style Wagon Wheel Pendant Light Instruction Manual
- June 10, 2024
- YOUKAIN
Table of Contents
YOUKAIN HDLP-2091712 12-Light Bronzed Finish Candle Style Wagon Wheel
Pendant Light
OVERVIEW
Wiring instructions
- Connect positive supply wire (A) (typically black or the smooth, unmarked side of the two-conductor cord) to positive fixture lead (B with appropriately sized twist on connector – see Drawings 1 or 2
- Connect negative supply wire (C) (typically white or the ribbed, marked side of the two-conductor cord) to negative fixture lead (D).
Grounding instructions
Flush Mount Fixtures
For positive grounding in a 3-wire electrical system, fasten the fixture
ground wire (E) (typically copper or green plastic coated) to the fixture
mounting strap (M) with the grounc screw (S) – see Drawing 1.&
Note: On straps for screw supported fixtures, first install the two
mounting screws in strap. Any remaining tapped hole may be used for the ground
screw.
Chain Hung Fixtures
Loop fixture ground wire (E) (typically copper or green plastic coated) under
the head of the ground screw (S) on fixture mounting strap (MI and connect to
the loose end of the fixture ground wire directly to the ground wire of the
building system with appropriately sized twist-on connectors – see Drawing 2
Post-Mount Fixtures
Connect fixture ground wire (E) (typically copper or green plastic coated) to
power supply ground with appropriately sized twist-on connector inside post.
Cover open end of connector with silicone sealant to form a watertight seal –
see Drawing 3.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>