BASS JAXX GLOBE Wireless Speaker Instruction Manual
- June 10, 2024
- BASS JAXX
Table of Contents
BASS JAXX GLOBE Wireless Speaker
Thank you for purchasing the Globe Wireless Speaker. This manual provides more information about this wireless speaker, please read the instructions before using.
Product Overview
Package Contents
1(One) Globe Wireless Speaker 4.3in. × 4.3in. × 3.7in. (11cm x 11cm x 9.4cm)
1(One) Charging Cable 19.7 in. (50 cm)
1(One) Instruction Manual
Power On/Off
Power on
Slide the ON/OFF switch to the “ON” position.
Power off
Slide the ON/OFF switch to the “OFF” position.
Pair Wireless speaker with your mobile device
- Keep the distance between your wireless speaker and mobile phone (or other devices) within 32.8 Feet.
- Power on the wireless speaker.
- Activate the Bluetooth function on your phone within range and select “GLOBE SPEAKER” from the list shown.
- You will hear a beep sound when pairing is successful.
Reconnect Wireless speaker to your mobile device
When powered on, the wireless speaker will automatically connect with the last
successfully paired device.
Charging your Wireless speaker
- Use the Micro USB charging cable provided with this wireless speaker.
- Connect the Micro USB plug to Micro USB charging port on the speaker, then connect the USB plug to a USB port on a computer or wall adapter to begin charging.
- The light will turn red while charging and will turn off once fully charged.
NOTE:
- You must select a qualified charger from a regular manufacturer.
- You must charge the Wireless speaker if it has been not used for more than 6 months.
Technical Specification
- Driver Diameter: 52 mm
- Impedance: 3 Ohms
- Power Supply: Li-ion Battery 3.7V 300 mAh
- Playtime: 1.5-2 Hours
- Charging Time: 1.5-2 Hours
- Bluetooth Range: 32.8 Feet
- Bluetooth Version: 5.3
- Micro USB Charging Cable Included
CAUTION : The micro USB charging cable included with this item is
intended for use with
this product. Only use the included micro USB charging cable to charge this
product.
FAQ
If the Wireless speaker cannot be paired with your device, please try the following:
- Ensure that your speaker is in pairing mode or reconnection mode.
- Ensure that Bluetooth search function of your mobile device is activated.
If the Wireless speaker cannot be recharged:
- If you use a power outlet, ensure that the power supply is connected securely and the outlet works.
- If you use a computer, ensure that it is connected and the USB port is powered.
Safety instructions for the lithium battery and charging the product
- the input voltage to the product is DC 5V 1A.
- In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product.
- Only charge the product at ambient temperatures between 10°C/ 50°F and 40°C/ 104°F.
- Do not heat above 70°C/ 158°F, eg. Do not expose to sunlight or throw into fire.
- Switch off the product after use.
- Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
- In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
- FCC ID : 2ADM5-SP-0217
- Item# SP-0217
- Class 1 LED product
Keep All Relevant Information for Future Reference
Distributed by 1616 Holdings, Inc.
701 Market Street, Suite 200
Philadelphia, PA 19106