ACEHE Y22 Smart Watch User Manual

ACEHE Y22 Smart Watch

Welcome to use our high-performance wrist-band smart bracelet which creates thoughtful and health experience for you.

Schematic diagram of main body of the smart bracelet
Power-on Long press the side button for 3 seconds or plug in the Magnetic charging cable to charge the smart bracelet.

Bind smart bracelet with APP

1. Click on Add Device to bind the smart bracelet.
2. Click on your device in the device list scanned.
3. The IOS system will show a Bluetooth pairing request and you can click on Bluetooth Pairing to confirm. Connect it directly to Android system.
4. Successfully bound.

Downloading and binding of smart bracelet APP

1. Download and install APP Scan QR code with mobile phone to  download APP. For IOS system, select APP storesearch Da Fit Androidsystem, select Google Play to download and install Da Fit.Or scan QR code to download
2. Note: your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.

Blueooth call connect Android
After connect APP successfully, mobile phone will pop up Bluetooth pairing request automatically, allow access to mobile phone contacts and call history. it is no need to set under menu of mobile phone. You can make call and answer call on watch after pair.

Remove Bluetooth Call connection Android
For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device.

Introduction of smart bracelet functions

Power-on status switch the menu interfaces of main screen, as the interfaces shown in the following;

Remove Device
For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device. For  Apple mobile phone after binding removal, you need to click on thesymbol on the right in Setting- Bluetooth, and choose to ignore the device.

Warning
Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real time.

APP

1. APP IOS App store, Da Fit AndroidDa Fit
2. APP 5.1 IOS 8.0 4.0.
3. IOS Android 4.
4. AndroidAPP

IPhone Audio _Y20GT
Android

IPhone –Audio _Y20GT

• 1>.APPDa Fit
• 2>APP
• 3>APP APP 2.? 1>. 2>., ; ,( ,QQ 3 >— Da Fit
• 3.? ,, ,, ,, ,,:

Product Information

The smart watch is a high-performance wrist-band smart bracelet that provides thoughtful and health experience to users. It comes  with Bluetooth connectivity, which allows users to make and answer calls directly from the watch. The smart watch also has a heart rate monitor that dynamically monitors heart rate in real-time. It is compatible with Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.

Product Usage Instructions

1. To power on the smart watch, long-press the side button for 3 seconds or plug in the magnetic charging cable to charge the watch.
2. To bind the smart watch with the APP, click on Add Device in the APP and select your device from the scanned device list. For IOS system, a Bluetooth pairing request will appear, and you can click on Bluetooth Pairing to confirm. For Android system, connect it directly.
3. Download and install the APP by scanning the QR code with your mobile phone. For IOS system, select APP storesearch Da Fit Android system, select Google Play to download and install Da Fit. Note that your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.
4. After connecting the APP successfully, the mobile phone will pop up a Bluetooth pairing request automatically, allow access to mobile phone contacts and call history. You can make and answer calls from your watch after pairing.
5. To remove the Bluetooth call connection on Android, simply click on Remove Device in the APP. For Apple mobile phone after binding removal, click on the symbol on the right in Setting- Bluetooth, and choose to ignore the device.
6. The smart watch has a heart rate monitor that dynamically monitors heart rate in real-time. Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real time.

Welcome to use our high-performance wrist-band smart bracelet which creates thoughtful and health experience for you.

Device maintenance

Please remember the following tips when you maintain your smart bracelet:

• Clean the smart bracelet regularly, especially its inner side, and keep it dry.
• Adjust the smart bracelet tightness to ensure air circulation.
• Excessive skincare product should not be used for the wrist wearing the smart bracelet.
• Please cease wearing the smart bracelet in case of skin allergy or any discomfort. Schematic diagram of main body of the smart bracelet

Power-on

Long press the side button for 3 seconds or plug in the Magnetic charging cable to charge the smart bracelet.

Downloading and binding of smart bracelet APP

• Download and install APP Scan QR code with mobile phone to download APP.
• For IOS system, select APP ，storesearch Da Fit。
• Android system, select Google Play to download and install Da Fit.Or scan QR code to download

Note : your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.

Bind smart bracelet with APP

1. Click on “Add Device” to bind the smart bracelet.
2. Click on your device in the device list scanned.
3. The IOS system will show a Bluetooth pairing request and you can click on Bluetooth “Pairing” to confirm. Connect it directly to Android system.
4. Successfully bound.

Blueooth call connect

• Android: After connect APP successfully, mobile phone will pop up “Bluetooth pairing request” automatically, allow access to mobile phone contacts and call history. it is no need to set under menu of mobile phone. You can make call and answer call on watch after pair.
• iPhone: Enter into Settings – Bluetooth, search device and connect pair (Audio _Y20GT). After pair successfully, you can make call/ answer incoming call.

Remove Bluetooth Call connection

• Android：For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device.
• iPhone: firstly, users need dismiss pair, then enter into mobile phone Setting – Bluetooth, find Audio _Y20GT, click icon on the right, ignore device, watch and mobile phone are disconnection.

Introduction of smart bracelet functions

Power-on status
switch the menu interfaces of main screen, as the interfaces shown in the following;

Remove Device
For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device. For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth, and choose to ignore the device. As shown below:

Frequently Asked Questions (FAQs)

1. Why does the smart bracelet automatically disconnect Bluetooth when the Android screen goes out?
   1> Lock background APP. When the Da Fit process is cleared, the smart bracelet will be disconnected from the mobile phone.
   2 > Set APP self-startup
   3 > Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set manually without any restriction.

2. Why cannot the smart bracelet receive message push?
   1> Please confirm that you have turned on the switch for message push at the mobile phone client.
   2 > Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar. (You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, QQ, call, SMS and mobile phone client).
   3 >Turn on the mobile phone — Settings. Enter “Notification use right” on the top search box, re-open Da Fit.

3. Why can’t take a hot bath with the smart bracelet?
   Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with small molecular radius and can easily infiltrate into the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.

Warning:
Please consult your doctor before you take a new sport. The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>