EXTECH AN300 Airflow Cone and Funnel Adapter Kit Instruction Manual
- June 10, 2024
- EXTECH
Table of Contents
EXTECH AN300 Airflow Cone and Funnel Adapter Kit
INTRODUCTION
The AN300-C Cone Adaptor Kit is intended for use with the Extech AN300 series Anemometers only (AN300, AN310, and AN320). The AN300-C kit includes a round and a square adaptor. For instructions on the AN300 Series meter, please refer to the manual included with the product or visit www.extech.com.
OPERATION
- Attach the round or the square adaptor to the AN300 series meter. Ensure that the adaptor is well mounted and locked before continuing
- The meter will automatically recognize the adaptor (the adaptor icon will appear).
- The meter’s AREA setting will now default to the dimensions of the vane opening.
- Connect the adaptor to the air duct or vent and measure Air Volume as described in the AN300 series user manual.
DIMENSIONS
- Round Adaptor area dimensions: 210mm (8.3″) diameter
- Square Adaptor area dimensions: 346 x 346mm (13.6″× 13.6″)
- Material: ABS plastic
Contact Customer Support
- Customer Support Telephone List: https://support.flir.com/contact
- Calibration, Repair, and Returns: repair@extech.com
- Technical Support: https://support.flir.com
Copyright © 2021 Teledyne FLIR LLC
All rights reserved including the right of reproduction in whole or in part in
any form.
www.extech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>