Soundcore Space Q45 User Manual
- June 10, 2024
- Soundcore
Table of Contents
Soundcore Space Q45 User Manual
APP
Download the soundcore app to customize ambient sound, adjust EQ settings,
update firmware, and explore more.
If your headphones cannot connect with the soundcore app, update it to the
latest version in your mobile app store.
WEARING
Wear the headphones with the “L” logo on your left ear and “R” logo on your right ear. Adjust the length of the headband for a comfortable fit.
CHARGING
Fully dry off the USB port before charging.
Do not turn on your headphones while charging.
Use a certified USB-C charging cable and charger to prevent any damage.
POWERING ON & PAIRING
Press and hold the power button for 2 seconds to turn on. The headphones will
automatically enter Bluetooth pairing mode when connecting for the first time.
Select “soundcore Space Q45” on your device’s Bluetooth list to connect.
MULTIPOINT CONNECTION
The headphones can connect with two devices at the same time. When already connected to one device, press the power button twice to pair with another device.
In the soundcore app, go to settings and select Dual Connections > Connect New Device.
MANUAL PAIRING
To manually enter Bluetooth pairing mode when the headphones are off, press and hold the power button for 5 seconds until the LED flashes blue.
BUTTON CONTROLS
| Switch ambient sound modes (ANC /Transparency /Normal)| | Press once
---|---|---|---
| Power on / off| | Press and hold for 2 seconds
| Play / Pause| | Press once
---|---|---|---
Next track| | Press and hold for 2 seconds
Previous track| | Press and hold for 2 seconds
Volume up / down| | Press once
| Answer / End a call| | Press once
Reject a call| Press and hold for 2 seconds
Mute / Restore the microphone| Press and hold for 2 seconds
| Activate voice assistant software| | Press twice
NOISE CANCELLATION
To reduce ambient noise, switch to noise cancellation (default) via NC button and customize in the soundcore app.
- Adaptive Noise Cancelling: Adjust the level of noise cancellation automatically for various scenarios.
- Custom Noise Cancelling: Set the level of noise cancellation manually.
TRANSPARENCY
To stay aware of your surroundings while listening to music, switch to transparency via NC button and customize in the soundcore app.
- Talk Mode: Voices stand out more clearly from other ambient sounds.
- Custom Transparency Mode: Set the level of transparency manually.
LDAC
- Use devices powered by Android 8.0 or later to experience LDAC quality sound.
- LDAC provides higher quality sound, increases power consumption, and reduces playtime.
- Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
- Go to settings in the soundcore app.
- Click on “Sound Mode”.
- Select “Preferred audio quality” to switch to LDAC codec.
- You will be notified that the headphones do not support LDAC when connected to two devices. Select “Turn on” to continue.
- It takes about 10 seconds to switch audio codecs. You may be requested to update the headphones’ firmware if available.
WIRED LISTENING
Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will turn off Bluetooth mode automatically.
RESET
You might need to reset your headphones if you experience connectivity or
function issues.
Delete the pairing history from your Bluetooth device first. Press the power
and volume up buttons simultaneously for 5 seconds until the LED flashes red
three times.
LED LIGHT GUIDE
Steady red
Steady blue
Flashing white
Flashing blue
Light off
FIRMWARE UPDATE
You will be informed once the new version of firmware is detected when you
connect the headphones with the app.
Ensure the headphones are powered on and connected to a device until the
firmware update is complete. During the update, avoid any usage and ensure
stable access to the internet.
SPECS
Specifications are subject to change without notice.
| Input | 5 V 0.7 A |
|---|---|
| Rated output power | 2.2 mW |
| Battery capacity | 750 mAh |
| Charging time | 2 hours |
| Playtime (with ANC off) | Up to 65 hours |
| Playtime (with ANC on) | Up to 50 hours |
| Driver size | 40 mm |
| Frequency response | 20 Hz – 40 kHz |
| Impedance | 16 ѷ |
| Bluetooth version | 5.3 |
| Bluetooth range | 15 m / 49 ft |
Download PDF:Soundcore Space Q45 User Manual