cervelo ST-A036 Alloy Road Stem Soloist Installation Guide
- June 10, 2024
- cervelo
Table of Contents
cervelo ST-A036 Alloy Road Stem Soloist
ST36 STEM Product Information
The ST36 STEM is an aluminum stem assembly used in cycling. It is available in various sizes ranging from 80mm to 130mm, with corresponding model numbers ST-A036-80, ST-A036-90, ST-A036-100, ST-A036-110, ST-A036-120, and ST-A036-130. The 80mm version does not include the ST36 Cable Guide. The stem faceplate fixing screws should be tightened to 6Nm and the fork steerer fixing screws should be tightened to 5Nm. The ST36 stem cannot be flipped for additional stack.
ST36 STEM Usage Instructions
To mount the ST36 STEM on a bike, follow the below steps:
- Select the appropriate size of the stem based on your bike’s requirements.
- Place the stem on the fork steerer tube and align it correctly.
- Secure the stem in place using the fork steerer fixing screws, tightening them to 5Nm using a torque wrench.
- Attach any cycling computer or accessory such as a light or camera to the stem using Accessory Mount Kit (Front) MT-LM-F-004.
- If using the 80mm version, attach the ST35 Cable Guide (MT-597) bolt finger tight (1Nm max).
- Finally, tighten the stem faceplate fixing screws to 6Nm using a torque wrench.
Note that the ST36 stem cannot be flipped for additional stack, and it is important to follow the recommended torque settings to ensure safe usage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>