SCARLETT SC-HD70IT12 Hair Dryer Instruction Manual

: June 10, 2024
: SCARLETT

Table of Contents

DESCRIPTION
IMPORTANT SAFEGUARDS
CARE AND CLEANING
STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCARLETT SC-HD70IT12 Hair Dryer Instruction Manual

DESCRIPTION

Instruction

Concentrator
Housing
COOL SHOT button
Heat setting switch
Speed setting switch
Hanging loop
Foldable handle
Cord swivel protection
Air inlet removable lattice

IMPORTANT SAFEGUARDS

Please read this instruction manual carefully before use.
Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
Do not use outdoors or in damp area.
Always unplug the appliance from the power supply before cleaning and when not in use.
To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
Do not spray aerosol products when the hair dryer is in operation.
Do not leave the appliance switched on when you do not use it.
Do not use other attachments than those supplied.
Never carry or suspend the appliance by the cord.
Keep the cord away from sharp edges and hot surfaces.
IMPORTANT:
Keep your hair away from the immediate vicinity of the air inlet opening. Keep the air inlet filter dust and fluff free.
Do not cover air inlet or air outlet otherwise the hair dryer may overheat.
The attachments become hot during operation
If the appliance is used in a bathroom, it should always be unplugged after use, because nearness of water is dangerous even if the appliance is switched off.
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
Children must be under control in order not to be allowed to play with the appliance.
In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
ATTENTION! Do not use the device beside the bathrooms, swimming pools and other vessels containing water.
The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
Manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where first two figures XX is the month of production, and following four figures XXXX is the year of production

INSTRUCTION FOR USE

The device is designed for drying and styling hair
Fully unwind the cord.
Attach a nozzle.
Insert the plug into the power supply.
Select the desired speed (heating mode) using the II speeds (3 heat settings) switch.

SPEED CONTROL

0 – off;
– medium speed for delicate drying and styling;
– high speed for quick drying and styling.
HEAT SETTINGS
– cold airflow;
– medium temperature for gentle drying and shaping;
– high temperature for rapid drying.

IMPORTANT: Airflow speed will be increased automatically after increasing the airflow temperature. CONCENTRATOR

The air concentrator is for bundling and directing the airflow for selective drying.

IONISATION FUNCTION

Ions which the hair dryer generates automatically, neutralize static electricity that sometimes appears in the hair while drying it. Besides, this technology enhances the effect of hair products: the hair becomes smoother, softer and more shining.

COOL SHOT

This appliance is featured with “COOL SHOT” function for hair style fixing. To activate the “COOL SHOT” function, simply press the COOL SHOT button. As the COOL SHOT button is released, the appliance returns to its normal setting.
Always switch the appliance off and unplug when finished. Leave it to cool for a few minutes before putting away.

CARE AND CLEANING

Switch off the appliance, unplug it from the power supply and allow to cool fully.
Take off the air openings grid from the device to remove hair and dust.
Clean the device with a damp cloth.
Do not use abrasive cleaners.
Periodically remove the air inlet removable lattice and clean it with a brush, then put the air inlet removable lattice in place.

STORAGE

Ensure that the hair dryer is completely cool and dry.
Do not wrap the cord around the appliance, as this may cause damage.
Keep the appliance in a cool, dry place.

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.