BOSCH PRO E60 Front Light Instruction Manual
- June 10, 2024
- Bosch
Table of Contents
Original Operating Instructions
PRO-E 60
PRO E60 – Version 1.1
PRO E60 Front Light
Headlight for E-Bikes with speeds up to 25 km/h (Pedicels).
This headlight is for DC power source of 12 V only.
Connection prepared for BOSCH systems.
This product is approved as a front light on E-Bikes according to the
currently valid German road traffic regulations (Stop).
INTENDED USE
This product is intended for mounting on approved vehicles only. Make sure
that your vehicle is suitable for retrofitting this product. If you are not
absolutely sure, please contact your dealer.
For switching on and off, use the E-Bike control system. This requires a
professional electrical connection to the E-Bike system and a light activation
on the E-Bike system. It is imperative that you have this work carried out by
your dealer.
Use the product only as described in this manual. Any other use is considered
as not intended and can lead to accidents, serious injury or damage to the
vehicle. The product is not a toy for children. The manufacturer or dealer
accepts no liability for damage caused by incorrect mounting and improper or
incorrect use.
Product Content
- Headlight
- K-reflector with screw
- Fork bracket universal HPP
- not included in delivery
Overview
Technical Description (Headlight)
| Type Name | PRO E60 |
|---|---|
| Model Type | Headlight |
| Connection | E-Bike |
| Light Intensity | 60 Lux |
| Luminous Flux LED | 175 Lumen |
| Light Source | LED |
| Input Voltage | 12 V (DC) |
| Housing | Aluminium / Plastic |
| Cable Length | 1400 mm |
| Plug | BOSCH System BES 3 |
| Weight | 48 g |
| Dimension | 50.5 x 48.0 x 60.0 mm |
| IP Protection Class | IPX4 |
| Wattage | 3.6 W |
Mounting On Fork
Only use a screw and washer that is suitable for your fork. If you are unsure,
please contact your dealer.
IMPORTANT! Usage without K-reflector does not comply with the Stop.
Cable Routing
The fork bracket universal HPP offers the possibility to fix the cable.
Connection To BOSCH Motor
When inserting the BOSCH plug into the front light socket of the BOSCH motor, make sure that the plug audibly clicks into place.
Product Setting
Presetting
Correct setting
IMPORTANT! Adjust the light cone of the spotlight so that the center of the light cone in 5 m is half as high as the spotlight itself.
GENERAL
READ AND KEEP THE MANUAL
This and other accompanying instructions contain important information on the
assembly , initial operation, and maintenance of the product.
Read all enclosed instructions carefully before assembling or using the
product, especially the general safety instructions. Non-observance of this
manual may result in serious injury or damage to the product itself and your
vehicle. Keep the enclosed instructions close to hand for further use. If you
pass on the product or the vehicle equipped with the product to a third party
, always include all accompanying instructions.
We at CUBE strongly recommend that you have this product assembled by your
dealer .
The enclosed instructions are subject to European legislation. If the product
or vehicle is delivered outside Europe, the manufacturer/importer may have to
provide additional instructions.
EXPLANATION OF SYMBOLS
The following symbols and signal words are used in the enclosed instructions,
on the product or on the packaging.
WARNING!
A medium risk of hazard which may result in death or serious injury if not
avoided.
CAUTION!
A low risk of hazard which may result in moderate or minor injury if not
avoided.
NOTICE!
Warning of possible damage to property.
Useful additional information for assembly or operation.
Read and observe the enclosed instructions.
Observe indication sound.
SAFETY INSTRUCTIONS FOR ACCESSORIES
WARNING!
Risk of accident and injury!
Read all safety notes and instructions. Failure to observe the safety
instructions and instructions can cause accidents, serious injury and damage.
Safety of children
If children play with the packaging or small parts, they may swallow them and
suffocate or injure themselves.
» Keep small parts away from children.
» Do not let children play with the packaging or product.
» Do not leave the product or vehicle unattended during assembly.
Safety instructions for assembly
»This head light is for DC power source from 5 to 16 V only. Do not use it to
an AC power source (e.g. a dynamo)! Connecting over voltage power may cause
the lamp to be destroyed!
»The electrical connection of the product has to be done professionally.
Please contact your dealer for the electrical connection of the product to
your vehicle.
»Before assembly , check the scope of delivery of the product for
completeness.
»Before assembly , check all components of the product and the vehicle for
damage, sharp edges or burrs.
»If the scope of delivery for the product is not complete or if you notice any
damage, sharp edges or burrs on the product, components or vehicle, do not use
it.
»Have the product and the vehicle checked by your dealer .
»Only use parts and accessories that are intended for the product or included
with the product. Components from other manufacturers may affect optimal
function.
»If you intend to combine this product with vehicles of other manufacturers,
be sure to check their specifications and check dimensional accuracy and
compatibility according to the instructions in the enclosed manuals and the
owner‘s manual of your vehicle.
»Screw connections must be tightened correctly with a torque wrench and with
correct torque values.
»If you are not experienced in using a torque wrench or do not have a suitable
torque wrench, have loose screw connections checked by your dealer .
»Note special torques for components made of aluminum or carbon fiber
reinforced polymer . Please also read and follow the operating instructions of
your vehicle.
Safety Instructions for Operation
Please note that accessories can have a significant influence on the
characteristics of the vehicle.
»Lighting equipment must be mounted in a correct and fixed manner and
permanently ready for operation. They must not be concealed.
»Prior to every ride, a secure and sturdy connection of the light to its
mounting bracket and of the mounting bracket to the bicycle must be checked
and ensured.
»For switching on and off, use the E-Bike control system.
»Never point the light beam into your eyes or the eyes of others.
»If you are not absolutely sure or if you have questions, please contact your
dealer .
»The enclosed instructions cannot cover every possible combination of the
product with all vehicle models.
Safety instructions for maintenance
Prevent malfunctions due to excessive wear , material fatigue or loose screw
connections:
»Check the product and your vehicle regularly.
»Do not use the product and your vehicle if you notice excessive wear or loose
screw connections.
»Do not use the vehicle if you notice cracks, deformation or color changes.
»Have the vehicle inspected immediately by your dealer if you notice excessive
wear , loose screw connections, deformation, cracks or color changes.
»The LEDs are not interchangeable. If a LED fails, the entire light must be
replaced.
CLEANING AND CARE
NOTICE!
Risk of damage!
Improper handling of cleaning agents can cause damage to the product.
»Do not use aggressive cleaning agents, brushes with metal or nylon bristles
or sharp or metallic cleaning objects such as knives, hard spatulas and the
like.
These can damage the surfaces and the product.
»Never use high-pressure cleaners, high air pressure or liquids containing
alcohol for cleaning. Do not use aggressive cleaners (also no alcohol).
»Clean the product regularly with a damp and soft cleaning cloth (if necessary
with a mild detergent).
STORAGE
All parts must be completely dry before storage.
Always store the product in a dry place.
Protect the product from direct sunlight.
DISPOSAL
Dispose of the packaging according to its type. Add cardboard and cartons to
your waste paper collection, and films and passports to your recyclables
collection.
The product is not allowed to be disposed of with normal household waste. The
product can only be disposed of at a collection point for electronic waste.
Please contact your local municipality for information on how dispose of the
product.
LIABILITY FOR MATERIAL DEFECTS
If there are any defects, please contact the dealer from whom you purchased
the product.
In order to ensure that your complaint is processed smoothly , it is necessary
for you to present proof of purchase and proof of inspection.
Please keep them in a safe place.
To ensure a long service life and durability of your product or your vehicle,
you may only use it in accordance with its intended purpose. It is essential
that you observe the information in the operating instructions of your
vehicle.
OTHER INFORMATION
Please visit us occasionally on our website at
www.CUBE.eu.
There you will find news, information and the latest versions of our manuals
as well as the addresses of our specialist dealers.
Pending System GmbH & Co. KG
Ludwig-HüttnerStr . 5-7
D-95679 Waldershof
+49 (0)9231 97 007 80
www.cube.eu
www.cube.eu/service/manuals/ PENDING
SYSTEM GMBH & CO. KG
Ludwig-Hitter-Str. 5-7 I D-95679 Waldershof
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>