LUTEC 5106801012 Outdoor Smart WiFi Wall Mount Lantern Sconce Instruction Manual

LUTEC 5106801012 Outdoor Smart WiFi Wall Mount Lantern Sconce

LUTEC USA CUSTOMER SERVICE Thank you for purchasing this Lutec Coastal fixture. This product has been manufactured with the highest standards of safety and quality. Questions, problems, missing parts? Before returning please call or email our customer service hotline Monday-Friday 9am-5pm EST (Eastern Standard Time) Toll Free 1-877-714-8669 E-mail: service@lutec.net Website: www.lutec.com Please reference your Model # 5106801012

SAFETY INFORMATION

Please read and understand this entire manual before attempting to operate or install the product.

• WARNING : This light fixture is designed to fit standard junction boxes as defined by the National Electrical Code.
• WARNING : Consult a qualified electrician if you are not certain about the installation process. Always install wiring connections in accordance with local code, ordinances and the National Electric Code.
• WARNING : Changes or modifications expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING : Before installing this fixture, turn off all power to the fixture location by turning off power at the main circuit breaker or fuse box.
• WARNING : RISK OF ELECTRIC SHOCK. Do not attempt to disassemble the bulb.
• WARNING : Not suitable for use with standard wall dimmer, to dim the light, use your apps. Suitable for use in operating environment between -4°F and 104°F (-20°C and 40°C) and humidity between 0-95%.

WARRANTY

Themanufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3) years (excluding the bulb) from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product.

This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, due to weathering, as this is considered normal wear and tear. Themanufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. Themanufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to, any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Teamat 1-877-714-8669 or visit www.lutec.com

PACKAGE CONTENTS

HARDWARE CONTENTS

NOTE : Parts are not to scale

INSTALLATION

Before you begin to install this lighting fixture, ensure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.

TOOLS REQUIRED

TOOLS REQUIRED (NOT INCLUDED)

ASSEMBLY INSTRUCTIONS

WARNING : Consult a qualified electrician if you are not certain about the installation process. Always install wiring connections in accordance with local code, ordinances and the National Electric Code.

WARNING : not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

1. Unscrew the screws assembled in the fixture (A). Then detach the crossbar from the fixture (A).

2. Attach the crossbar to the junction box using the screws (AA).
   CAUTION : Turn the power off at the main circuit breaker or fuse box. Never rely on the wall switch alone to turn off power.

3. Wire connection guide : Ground wire: Wrap ground wire from outlet box around ground screw preassembled on crossbar no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire nut. Supply wires: Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White). Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black). Tighten by wire nut (BB). It is better to wrap the wire nuts with black electrical tape after connections. Carefully place the wires into the junction box. Then secure the fixture (A) by screwing the screws removed in step 1.

4. Apply silicone caulk (not included) completely around the perimeter of the fixture where the back plate meets the mounting surface to prevent water from seeping into the junction box.

5. Install the bulb (CC) to the fixture (A).

6. Rotate the diffuser (B) clockwise to the fixture (A)

DOWNLOAD THE FREE APP AND CONNECT

SET UP TUYA SMART APP

PREPARE WIFI LIGHT BULB

Add Device
On the Tuya app, click on the upper right [+] icon to add a device.

Detect Device (2 Options)
Auto Scan (First Option) The app will automatically detect this new light bulb. Click [Go to add] to start pairing process.

Detect Device (Alternative way)
Add Manually (Second Option) Choose [Light Source (Wi-Fi)] model, Then follow the screen direction.

Network Setting
Follow the on screen introduction to enter your 2.4G Wi-Fi network password and add the light bulb to the network.

PAIR WIFI LIGHT BULB
Personalize Device During the [Done] screen that confirms light bulb added successfully. We recommended to rename the light bulb to a nick name that you’ll be calling it in the future

CUSTOMIZE WIFI LIGHT BULB
In Tuya app, click [Home] icon on the bottom to see the list of connected light bulbs. Select any light bulb to enter the customization screen.

1. White Ambiance Tunable warm white or cool white light
2. Color Ambiance Style up your home decor with color accents
3. Routine & Schedule

Connect to Smart Home

1. In Tuya app, click on the device you would like to be connected to your smart home devices.
2. Select the smart home device listed below, follow the steps on your app to complete the connetion.

CARE AND MAINTENANCE

CAUTION : Turn OFF all power to the circuit at the main circuit breaker or fuse box. DO NOT rely on the wall switch alone to turn off power.

• This lantern provides years of maintenance-free service.
• Do not touch the bulb or open tihe fixture housing.
• To clean, turn OFF all power to the circuit and clean surfaces with a mild, non-abrasive cleaner.

FAQs

• Q: Can bulbs be used in sockets with wall dimmers?
  A: No, bulls are designed to be used in on/off sockets only. To dim the blub, please use the apps or voice assistants for control.

• Q: Can I connect my bulbs directly to Amazon/ Google without the Tuya Smart App?
  A: Unfortunately no, the Tuya app is required to setup the LED light bulb.

• Q: Does the bulb remember settings after it’s powered off, like a power outage?
  A: Yes. The bulb will remember all settings until it is reset into pairing mode (by turning it on and off 3 consecutive times).

• Q: Why can not to connect WiFi?
  A: The bulb can only be connected to smartphone by 2.4GHz WiFi

• Q: How come some of the apps I downloaded appears different from the ones from this manual?
  A: We do not have control over how Amazon and Google design their apps, so things may look slightly different upon their app updates (such as having the icons located at different place). However the main idea to connecting the blub to the apps should be the same, if you are not sure on how to make things work, please contact our customer service team.

• Q: Is there a max number of bulbs I can run at the same time?
  A: There is no limit to the max number you can install.

• Q: Where can I buy replacement bulb?
  A: When the bulb needs to be replaced, it is recommended to buy the A19 smart bulb in www.HomeDepot.com. Please kindly note that the APP and the specific functions of the bulb will vary with the bulb manufacturer.

References

• Home | Lutec

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>