LUTEC 5299402330 1-Light Black Outdoor LED Wall Mount Lantern Sconce Instruction Manual

LUTEC 5299402330 1-Light Black Outdoor LED Wall Mount Lantern Sconce

Product Information

The Lutec Coastal fixture is a high-quality lighting product that has been manufactured with the highest standards of safety and quality. It is designed to fit standard junction boxes as defined by the National Electrical Code. The product comes with a warranty, and customers can contact Lutec USA customer service for assistance with any questions, problems, or missing parts.

Product Usage Instructions

1. Before attempting to operate or install the product, read and understand the entire instruction manual.
2. Check that all parts are present and undamaged before beginning the installation
3. Turn off all power to the fixture location by turning off the power at the main circuit breaker or fuse box before installing the fixture.
4. Consult a qualified electrician if you are not certain about the installation process.
5. Always install wiring connections in accordance with local codes, ordinances, and the National Electric Code.
6. Use the tools required for installation, which include a Phillips screwdriver, step ladder, silicone sealant, and wire strippers (optional).
7. Follow the assembly instructions provided in the manual.
8. If you encounter any issues during the installation or operation of the product, contact Lutec USA customer service for assistance.

LUTEC USA CUSTOMER SERVICE

Thank you for purchasing this Lutec Coastal fixture. This product has been manufactured with the highest standards of safety and quality. Questions, problems, missing parts? Before returning please call or email our customer service hotline Monday-Friday 9am-5pm EST (Eastern Standard Time) Toll Free 1-877-714-8669 E-mail: service@lutec.net Website: www.lutec.com Please reference your Model # 5299402330

SAFETY INFORMATION

Please read and understand this entire manual before attempting to operate or install the product.

FCC STATEMENT

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

• WARNING: This light fixture is designed to fit standard junction boxes as defined by the National Electrical Code.
• WARNING: Consult a qualified electrician if you are not certain about the installation process. Always install wiringconnections in accordance with local code, ordinances and the National Electric Code.
• WARNING: Changes or modification expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: Before installing this fixture, turn off all power to the fixture location by turning off power at the main circuit breaker or fuse box.

WARRANTY

Themanufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years (excluding the bulb) from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, due to weathering, as this is considered normal wear and tear. Themanufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. Themanufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to, any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Teamat 1-877-714-8669 or visit www.lutec.com

PACKAGE CONTENTS

HARDWARE CONTENTS

NOTE: Parts are not to scale.

INSTALLATION

Before you begin to install this lighting fixture, ensure all parts are present. Compare parts with the Hardware Included and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product.

TOOLS REQUIRED

TOOLS REQUIRED (NOT INCLUDED)

ASSEMBLY INSTRUCTIONS

• WARNING: Consult a qualified electrician if you are not certain about the installation process. Always install wiring connections in accordance with local code, ordinances and the National Electric Code.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

1. Unscrew the screws assembled in the fixture (A).

2. Remove the lampshade with two hands.

3. Rotate the nut counterclockwise to detach the  mounting bracket

4. Attach the mounting bracket to the junction box using the screws (AA).
   CAUTION : Turn the power off at the main circuit breaker or fuse box. Never rely on the wall switch alone to turn off power.
   Hardware used

5. Wire connection guide:
   Ground wire:
   Wrap ground wire from outlet box around ground screw preassembled on mounting bracket no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connectto outlet ground wire with a wire nut.
   Supply wires:
   Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White). Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black). Tighten by wire nut (BB). It is better to wrap the wire nuts with black electrical tape after connections.
   Hardware used

6. Rotate the nut (removed in step 3) clockwise to secure the fixture (A).

7. The factory default color temperature is 3000K, you can adjust the color temperature according to your personal needs (3000K, 4000K, 5000K).

8. Cover the lampshade over the fixture with two hands.

9. Tighten the screws removed in step 1.

10. Apply silicone caulk (not included) completely around the perimeter of the fixture where the back plate meets the mounting surface to prevent water from seeping into the junction box.

CARE AND MAINTENANCE

CAUTION: Turn OFF all power to the circuit at the main circuit breaker or fuse box. DO NOT rely on the wall switch alone to turn off power.

• This lantern provides years of maintenance-free service.
• To clean, turn OFF all power to the circuit and clean surfaces with a mild, non-abrasive cleaner.

TROUBLESHOOTING

check the wire connections.
There is no power going to the light.| Check that the switch is on and there is power to the light fixture.

References

• Home | Lutec

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>