Voice Comm WLS15 15W Dual Wireless Foldable Chargepad User Guide

Voice Comm WLS15 15W Dual Wireless Foldable Chargepad

15W Dual Wireless Chargepad

Thank you for choosing our product! Our 15W Dual Wireless Chargepad is a smart phone wireless charger that allows you to easily charge your phone without the hassle of cords and cables.
Please read the user manual before using and keep it for future reference.

Product Information

• Input: DC 5V/2A, 9V/2A, 12V/2A
• Output: 15W (Max)
• Charging Distance: ≤8mm
• Charging Efficiency: ≥75%
• Compatibility: Works with all Qi-enabled smartphones, including iPhone 12/12 Pro/12 Pro Max/12 Mini, Samsung Galaxy S21/S20/S10/S9, and more

Product Usage Instructions

1. Connect the power adapter to a socket.
2. Connect the power line to the charging plate.
3. Make sure the wireless charger dock is connected to the power supply.
4. Place your Qi-enabled smartphone properly on the transmitter. The indicator light will turn blue and charging will begin.
5. To stop charging, simply take your phone away from the charging pad. The device will enter standby mode.

Note: If you are using a Samsung phone with built-in wireless charging function and it gets fully charged with this product, the battery power will remain fully charged if you don’t move the phone for a long time (supplementary charge).

Thanks for choosing us!
This is a smart phone wireless charger that allows you enjoy the fun of digital products easily.
Please kindly read the user manual before using and keep it for future reference.

Specification

• Input: 12V=4A
• Frequency: 110-148kHZ (Only for EU) 115-205kHZ (Only for FCC)
• Dimensions: 180×80×12mm
• Charging distance: <10mm
• Conversion: 72%
• N.W.: 123g

Connect to Power Adapter

1. Connect the power adapter to socket.
2. Power line is connected with the charging plate.

Charging Mode

1. Make sure the wireless charger dock connect to the power supply.
2. Put the Qi-enabled smart phone properly on the transmitter, the indicator light become blue and start charging. The device enter to standby mode when take away the phone from charging pad.

Note: When Samsung phones which are built-in wireless charging function get fully charged with this product, if don’t move the phone in a long time, the battery power keeps in fully charged status(supplementary charge).

Notes

1. Do not squeeze or collisions.
2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
3. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomnon.
4. Do not place too close with magnetic stripe or chip card ( ID card, bank cards, etc. ) to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable medical devices ( pacemakers, implantable cochlear, etc. ) and the wireless charger, to avoid potential interference with the medical device.
6. To take care of the children, to ensure that they won’t play the wireless charger as a toy, to avoid unnecessary accidents.

FCC

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

EU:

• This device was tested for uncontrolled environment operations.
• To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
• Declaration of Conformity Hereby,VoiceComm, LLC declares that the product type WLS15DUAL-WHT262043 is in compliance with Directives 2014/53/EU & 2011/65 EU. The full text of the EU declaration of conformity is available at the following internet address: ventevmobility.com
• Applicant: VoiceComm, LLC
• Address: 80 Twinbridge Dr. Pennsauken, NJ 08110
• Manufacturer: Ventev Mobility
• Address: 600 Washington Ave, Towson, MD 21204
• FCC ID: 115-205KHz
• EU: 110-148KHz
• Radiated H-Field: -2.65 dBuA/m(@10m)(Only for EU)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>