Voice Comm 2A3XF-WLS15S 15W Wireless Chargepad User Manual

Comm 2A3XF-WLS15S 15W Wireless Charge pad
User Manual

2A3XF-WLS15S 15W Wireless Chargepad

Thanks for choosing us!
This is a smart phone wireless charger that allows you enjoy the fun of digital products easily. Please kindly read the user manual before using and keep it for future reference.

Specification

Input: 12V-2A
Frequency: 110-148kHZ (Only for EU); 115-205kHZ (Only for FCC)
Dimensions: 80 x 80 x 8mm
Charging distance: ≥10mm
Conversion: 372%
N.W.: 57g

Connect To Power Adapter

1. Connect the power adapter to socket.
2. Power line is connected with the charging plate.

Charging Mode

1. Make sure the wireless charger dock connect to the power supply.
2. Put the Qi-enabled smart phone properly on the transmitter, the indicator light become blue and start charging. The device enter to standby mode when take away the phone from charging pad.

Note: When Samsung phones which are built-in wireless charging function get fully charged with this this product, if dot’t move the phone in a long tome, the battery power keeps in fully charged status (supplementary charge).

Notes

1. Do not squeeze or collisions.
2. Do not disassemble or throw into fire or water, to avoid causing a short circuit leakage.
3. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
4. Do not place too close with magnetic stripe or chip card ( ID card, bank cards, etc. ) to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable medical device ( pacemakers, implantable cochlear, etc. ) and the wireless charger, to avoid potential interference with the medical device.
6. To take care of the children, to ensure that they won’ t play the wireless charger as a toy, to avoid unnecessary accidents.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
EU: This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’ s body and the product. Declaration of Conformity Hereby,VoiceComm, LLC declares that the product type WLS15-WHT262042 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: ventevmobility.com
Applicant: VoiceComm, LLC
Address: 80 Twinbridge Dr. Pennsauken, NJ 08110
Manufacturer: Ventev Mobility
Address: 600 Washington Ave, Towson, MD 21204

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>