MFP 3102fdw HP LaserJet Pro Printer User Guide

MFP 3102fdw HP LaserJet Pro Printer

Power on

Plug in and power on. On the control panel, choose your language and country/region.

Load paper

Load paper and adjust the guides.

Note : If loading paper larger than A4, pinch the button in the front of the tray and pull forward. The tray will extend forward by approximately 2.36 inches (60 mm).

Connect printer

On the control panel, choose your connection method. If the printer will support multiple users, select Ethernet or Wi-Fi.

Ethernet

1. Connect an Ethernet cable from the printer to the same network as the computer.
2. Press “OK” on the control panel to confirm the IP address. Then continue with the steps on the control panel until you reach the home screen

Wi-Fi

1. Make sure the computer Wi-Fi is turned on and in range of the printer during setup
2. On the control panel, enter Wi-Fi information when prompted. Choose the same network as the computer.
3. Continue with the steps on the control panel until you reach the home screen.

USB

1. Connect the USB cable to the port on the back of the printer and to the computer
2. Continue with the steps on the control panel until you reach the home screen

Install printer software

1. Go to hpsmart.com/download to download the HP software and print drivers.
2. Install software and complete setup.

Get help with setup
Find setup information and videos online

hp.com/support/ljmfp3101-3108

© Copyright 2023 HP Development Company, L.P. Printed in xxxxx

References

• HP LaserJet Pro MFP 3101-3108fdn/fdw Printer series | HP® Customer Support
• HP Smart
• hp.com/support/ljmfp3101-3108
• HP Smart

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>