boAt Airdopes Fuel TWS Earbuds User Manual

: June 10, 2024
: Boat

Table of Contents

Airdopes Fuel TWS Earbuds
PACKAGE CONTENTS
CHARGING THE EARBUDS
BASIC FUNCTIONS
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Airdopes Fuel TWS Earbuds
User Manual boAt Airdopes Fuel TWS Earbuds

Airdopes Fuel TWS Earbuds

Airdopes Fuel
Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdopes Fuel. Please consider this manual as your guiding map towards the unparalleled shores of auditory realm Knowledge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

• Ix Pair of TWS Sorbs/Gs
Ix Charging Cara
lx Type C Charging Cade
lx User Manual
lx Warranty Card
lx Catalogue
lx FAQ Cord
2x Additional Earmuffs

POWER ON (FIRST TIME USER)
Step 1 : To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside) Courtesy our IWP'” (Insta Wake N’ Pair) technology, the earbuds power on automatically, get connected and enter the connection mode
OR Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds
Step 2: After powering on, the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes on primary earbud and blue LED flashes once every 5 seconds on the secondary earbud
CONNECTION MODE
Step 3: Turn on the Bluetooth functionality on your phone/media device and scan
Step 4: Search for ‘Airdopos Fuel’ and pair accordingly
Congratulations! Your earbuds are now connected successfully via Bluetooth.
Note:

Pairing mode lasts for 5 minutes. If the pairing time is missed then you will need to reconnect the earbuds and follow the above-mentioned procedure
Airdopes Fuel remembers previously connected devices; once switched on, the earbuds automatically reconnect to the previously connected devices in working range

SINGLE EARBUD USAGE

Step 1: Please note that both the earbuds can bo used in mono mode.
Smart / Manual Power On for switching on the desired earbud
Step 2: The selected earbud automatically enters the connection mode indicated by rod and blue LED flasher.
Step 3: Turn on Bluetooth on your phone/media device and search for ‘Airdopes Fuel’ to connect
Notes:

To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud hence enabling Stereo usage
You cannot skip tracks or return to the previous tracks in Mono (single-earbud) mode

QUICK GUIDE ON FUNCTIMALMES

• 3 Seconds| | Long touch either CTC for 3 seconds to activate voice assistant
---|---|---
• 8 Seconds| Long touch both CTCs for 8 seconds to manually power on
• 5 Seconds| Long touch both CTCs for 5 seconds to manually power off

CHARGING THE EARBUDS

Step 1: Please insert the earbuds back inside the charging case in correct orientation and close the lid
Step 2: In charging status, the Red LED turns on for 2 secs when lid gets opened. LED should be off when lid is closed.
Step 3: Once the earbuds got fully charged, the charging case automatically switches off to save power and the LED turn: off
Note:

When the earbuds” remaining battery is low, RED blink (3 times) when the Case led gets opened
When the earbuds’ remaining battery is between 30%400%, BLUE blink (3 times) when the Case lid gets opened.
Before using the earbuds for the first time it is recommended to fully charge the earbuds. Also, please keep the lip of the charging case closed while charging.
LED1 lights up for LEFT bud
LED3 lights up for RIGHT bud
If both are getting charged, they get indicated by LED1 & LED3 for 5 secs

BASIC FUNCTIONS

Voice Assistant: Long touch the left CTC for 3 seconds to activate default voice assistant
Answer. Single tap the CTC on either earbud to answer an incoming call
Hang Up / Reject Call’ Double tap the CTC on either earbud to end / reject call
Play/Pause Music: Single tap either earbud’s CTC to play or pause music
Next Track When playing music, double tap the right earbud’s CTC to skip to the next song
Previous Track” When playing music, double tap the left earbud’s CTC to return to the previous song
Note: Volume can only be controlled via the media device

VOICE ASSISTANT

Step 1: Long touch the CTC on either earbud for 3 seconds to activate the smart voice assistant
Step 2:The respective voice assistant screen pops up and you may place your commands at ease

Tips: You may try out the following commands
SMART POWER OFF

Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in the correct orientation and dose the lid The earbuds automatically switch off land and enter into charging mode/.

Note: : If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.
BEAST™ MODE
Long touch the right CTC for 3 seconds to switch to Low Latency mode. also known a: the BEAST- Mode Once switched on. it gots notified via a sound prompt. Long touch the right CTC for 3 seconds once again, to turn it off and return to Music Mode.
Made for the Garners – By Garners. BEAST—Mode reduces the latency significantly and improves the overall gaming experience.
ENC™ MODE
Our ENim tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENC as the quad mics are equipped with the same and activated by default.
Deliver your voice without interruptions anywhere – traffic, railway stations. airports. workspace: literally anywhere!
MANUAL POWER OFF

Step 1: Long touch both CTCs for 5 seconds to manually power off earbuds.
Step 2: Once the earbuds get turned oft place them back inside the case and dose the lid

SMART POWER OFF
Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back into the charging case in correct orientation and close the lid The earbuds automatically switch off (and enter charging mode).
FACTORY RESET
Perform the factory reset In case you feel any difficulty while operating your Airdopes.
NOTE: Before performing reset clear “Airdopes Fuel” from pairing device history by forgetting device
Step 1: Take out the earbuds from the case
Step 2: Long touch both CTCs for 5 seconds one after another, then keep the earbuds inside the case, close the lid and wait for 5 seconds
Step 3: The case LED flashes 5 times to Indicate a successful factory reset
Step 4: Take out the earbuds from the case and perform a fresh connection
Congratulations! Your Alrdoants Fuel has been Reset.
$

SPECIFICATIONS

Headphone Type	TWS
Bluetooth Version	V5.3
Music Playtime	Up to 1314RS per charge;

WARNING

Please follow the instructions to operate
Please don’t use the earbuds in extreme temperatures
Please don’t use the product near water
Please keep the product away from heat sources. as the heat may damage it
Don’t jam the pens such as charger POrt. LED port. etc
It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life