EXTECH LCR205 SMD Component Fixture Instructions
- June 10, 2024
- EXTECH
Table of Contents
LCR205 SMD Component Fixture
Product Information: LCR205 SMD Component Fixture
The LCR205 SMD Component Fixture is a device that is designed to be used with the Extech LCR200 LCR meter. It has an adjustment range of 0 to .375 inches (0.95cm) and features three terminals: High (1), Low (2), and Guard (3). The fixture is designed to clamp the measurement contacts (5) to the SMD component (4) using an adjustment knob (6). The LCR205 SMD Component Fixture is ISO-9001 certified, ensuring that it meets high-quality standards. This device is manufactured by Extech, a trusted brand in the electronics industry.
Product Usage Instructions:
- Connect the LCR205 SMD Component Fixture to the Extech LCR200 LCR meter.
- Identify the SMD component that needs to be measured.
- Place the SMD component (4) on the fixture between the measurement contacts (5).
- Adjust the fixture by turning the adjustment knob (6) until the measurement contacts (5) are clamped onto the SMD component (4).
- Ensure that the measurement contacts are in the correct position: High (1) on one side of the SMD component and Low (2) on the other side. The Guard terminal (3) should be connected to the ground.
- Turn on the Extech LCR200 LCR meter and select the appropriate measurement function.
- Take the measurement and record the results.
- When finished, turn off the Extech LCR200 LCR meter and remove the SMD component from the fixture.
Usage
This chip component fixture is for use with the Extech LCR200
LCR meter.
- Adjustment range : 0 to .375 “(0.95cm)
- Terminals: 3 blades :
- High
- Low
- Guard
The Adjustment knob (6) will clamp the measurement contacts (5) to the SMD
component (4).
Copyright © 2022 FLIR Systems Inc.
All rights reserved including the right of reproduction in whole or in part in
any form
ISO-9001 Certified
www.extech.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>