Avance Beauty IPL 350-LS Ultra and Driver User Manual

Avance Beauty IPL 350-TT
Instruction Material for IPL
Tattoo Reduction System.
Quick Setup Guide
Also approved for: Acne, Permanent Hair Reduction,
Wrinkle Reduction, Photo Rejuvenation,
Toning/Tightening and Hyperpigmentation Issues.

IPL 350-LS Ultra and Driver

Keep this manual in a convenient place for quick and easy reference at all times.
In the interest of providing superior equipment, Avance Beauty Industries re- serves the right to modify or amend equipment specifications without notice or obligation.
Avance Beauty Industries Ltd.

Intense Pulsed Light (IPL)

IPL Epilation is a relative newcomer to the scene of photo-based hair removal. Laser hair removal provided stunning results using a fast and entirely non- invasive beam of light. Doctors around the world began using lasers in their practices, and it seemed that there was no end to what lasers could accomplish. Yet each laser could produce only a single wavelength, and depending on a num-ber of factors such as skin type, it was impossible to provide this incredible treatment for certain people, particularly those with deep tans and/or darker skin tones. In the late 90s, dermatologists began asking themselves how they could provide more treatment options while improving results. Pulsed light uses a broad-wavelength light source (for example, a xenon or halogen flash bulb) to create an intense pulse of light which is focused through a con-denser lens. As each wavelength is represented with a smaller number of photons, the light can readily pass through darker skin without heating the melanin. The concentrated dark color of the pigment contained in the hair follicle absorbs many different wavelengths of light, converting them to heat.

IPL provides a much safer alternative to laser, while at the same time being much more versatile. In addition to treating unwanted hair, IPL has long been used for general dermatology, enabling such treatments as dermal resurfacing, scar and stretch mark removaVreduction, and tattoo re-moval. Spider veins, rosacea, port-wine gain (birthmark), and even acne can be treated using IPL

Client Pre-Qualifications

The best candidate for IPL hair removal has fair skin with dark termi-nal hairs. Skin typing for exposure to ultraviolet light can be catego-rized by the Fitzpatrick classification, developed by Dr. Thomas Fitz-patrick of Harvard Medical School. Skin Type I: Never tans, always burns (extremely fair skin, blonde hair, blue/green eyes). Skin Type II: Occasionally tans, usually bums (fair skin, sandy to brown hair, green/brown eyes). Skin Type HI: Often tans, sometimes bums (medium skin, brown hair, brown eyes). Skin Type IV: Always tan, never burns (olive skin, brown/black hair, dark brown/black eyes). Skin Type V: Never burns (dark brown skin, black hair, black eyes) Skin Type VI: (black skin, black hair, black eyes). Types 1 through 4 are outstanding candidates. Type 5 will have excellent results as well, but care must be taken to assure that the IPL will not burn the skin. Type 6 should not undergo IPL or laser hair removal unless used in conjunction with skin bleaching due to the high risk of burning and hypo/hyper pigmentation issues. Reference

1. Eye/ring P, Cremes N, Egekvist H, Christiansen K, Troilus A. Hair reduction using a new intense pulsed light irradiator and a normal mode ruby laser. J Cutan Laser Ther 2000; 2: 63-71.
2. Kauvar AN. Treatment of pseudorolkuhris with a pulsed infrared laser. Arch Dennatol 2000; 136:1343-6.
3. Eremia S, Li C, Newman N. Laser hair removal with alexandrite versus diode laser using lour treatment sessions: 1-year results. Demerol Surg 2001; 27: 925-9.
4. Gap° M, AsMn G, Akoz T, Erdogan B. Comparison of alexandnte laser and electrolysis rot hair removal. Derrnatol Surg 2000; 26:37-41.
5. Sendai PL, Luci A, Gallmbelti fa, Ferranti G. Long-term elation with king-pulsed neodimium:YAG laser. Dennatol Sorg 1999; 25:175-B.
6. Lbyd JR, Malcov 14. Long-term evaluation of the King-pulsed aleyandrite laser tor the removal of bikini hair at shortened treatment intervals. Dermatol Sep 2000; 26:633-7

IPL Control Locations/Feature Descriptions

A. Key Lockout: This feature is required by law on all high-power laser and light devices.
The first step in the correct sequence to power-up your laser is to turn this clockwise using the special key included in your kit.
B. System Status LEDs: These lights will indicate system status (neutral or live) and which  modality is enabled.
C. Pulse Control: This allows the operator to set the number of IPL/RF pulses per second.
D. IPL Jack: An eight-prong coaxial power jack for the IPL hand piece.
E. IPL Instrument: A 13,000mW high intensity pulsed light and high powered RF emitter instrument with thumb switch and counter reset button. Note:
F. Eyewear: This is an essential part of the treatment process. Direct or reflective IPL radiation can seriously injure the eye. Both the technician and the patient must use the
protective eyewear while the IPL is enabled or activated. Eyewear is intended for accidental exposure only. Never stare directly into an IPL emission.
G. Carbon Dye: This is an atomized form of molecular carbon which easily penetrates deeply into the follicle shaft. The dye adds pigment which gives a receptor for the pho-
ton/heat exchange reaction.
H. HF (High Frequency): This switch enables or disables the secondary function HF energy mode to amplify the thermolysis effects of the IPL treatment.
I. Post Treatment Gel: This is a special formula which speeds healing and reduces hair growth activity with OTC anti androgens.
J. Dermal-Plast: A special 3.5% lidocaine gel formula to reduce patient discomfort.
K. Post Treatment Gel: Anti-androgen formula that reduces the rate of hair re- growth and speeds healing of the skin following IPL treatments.
Equipment Warranty
We warrant to the original purchaser the equipment manufactured by us to be free from defects in material and workmanship under normal use and service. Our obligation under this warranty shall be limited to the repair or exchange of any part or parts which may prove defective under normal use and service within 12 calendar months from the date of shipment and which our examination shall disclose to our satisfaction to be thus defective. When necessary, purchaser shall apply for a Return Materials Authorization and instructions on proper return procedures from their original sales associate. The laser diode (head) requires special operating precautions which, if defied, may void warranty. Warranty Extension Certification:

IPL Startup Procedure

Put on your IPL eyewear before powering up your system. Wear the eye protectionthroughout the entire procedure.
Before connecting your IPL instrument to the main system, be sure the key switch is off (counter and indicator LEDs will be off). Failure to adhere to the start-up procedure may cause damage to your IPL emitter.
Place the IPL head in a secure position POINTED AWAY from you and the client.

1.  Turn the key lockout switch clockwise to system status IPL ‘Enabled’. At this time your digital pulse counter readout will show the number of pulses since the last reset. A bright LED on the instrument will begin flashing. The flashing blue warning LED means your IPL is now live and extreme care must be exercised while handling to avoid accidental eye-exposure.
2.  Activate the HF ‘Enabled’. The red and yellow warning indicators will confirm this operation.
3.  Set power level for treatment. It is recommended to start out on setting 2 then work your way up to 3 if client discomfort is minimal. The use of a lidocaine pre-treatment spray or an IPL coupling gel reduces discomfort substantiall

WARNING: This IPL instrument emits photon intensity equivalent to an arc welder and many times the intensity ofthe sun.
It must be handled with great care. Do not allow person into the treatment room who are not wearing ANSI certified IPL protective eyewear. In addition, this  nstrument emits high intensity shortwave radiation which also poses risk to the human eye.  Never treat on the eyes. The eyelid provides no protection. IPLand shortwave radiation will pass easily through and may seriously damage the retina and/or lens resulting in loss of vision quality.

Technical Specification

Input: 110-240V AC, 4A
Output: 13,000mW (pulsed)
Spectrum:410-1200nm
UV Radiation: None
Safety Considerations:  Eye Protectio It is recommended to use the IPL in high pulse mode (setting 3) at all times. This will allow the technician to deliver single pulses each time the trigger switch is pressed. If the switch is held down, the IPL driver will deliver a steady series of pulses atapproximately 7 per second. This is the ideal rate for most treatments.

IPL Emitter Port Maintenance
Intense Pulsed Light treatments should be performed on shaved (or waxed) skin. In photo epilation, the follicle being targeted is about 0.25-0.5cm (1/8 to 1/4 in) below the  kin (the follicle and papilla). To best reach the desired tissue under the skin it is best to remove the hair from the surface of the skin.
If using carbon or photoreactive dyes, remove any excess which may come in contact with the optics using ethyl alcohol.
For light maintenance use acetone or alcohol on a cotton tip applicator. For more aggressive cleaning use a sharp blade (scalpel or razor blade) to scrape any carbonized material from the tip
Intense Pulsed Light Progressively Permanent Hair Removal
The IPL can be considered an excellent replacement for laser hair removal as the results and over-all procedure are similar in many ways. It can be noted that IPL treatments are more efficient due to the substantial increase in overall energy being used (which equates to less overall treatment time). Like laser, IPL will injure the cells which are responsible for hair growth by way of thermolysis (heat in the follicle tissue). This trauma is just below the threshold of injuring other cells (notably skin) around the follicle. IPL works best on clients who have light skin combined with dark hair growth. Should a hair follicle survive the IPL treatment, it will grow back slower and thinner. After a series of treatments the continual ‘site specific’ local-ized trauma to the follicle tissue will eventually destroy all hair growth. Once destroyed, the follicle cannot produce another hair.
Discomfort and Client Reaction
Remarkably, the sensation felt with an IPL treatment is no more intense than that of a laser (although much more total energy is being delivered to the tissue). The first few pulses from the IPL generally are not felt by the client. Pulses 5-6 (if the technician chooses to deliver that many) begins to feel like a snap of a rubber band (as the tissue absorbs and re-tains the energy). Seven or more pulses in less than one second may be uncomfortable for some clients. The use of a topical desensitizing spray or pre-treatment cold pack will alleviate most sensation. **Pre-Treatment Preparation
First spray the area with a lidocaine or benzocaine topical numbing com-pound. Now coat the IPL emitter tip with the cooling and coupling gel included with your kit. The patient will be able to withstand as many as 8-10 pulses per 2.5 cm2 without much sensation. It is generally not necessary to deliver more than 7 pulses for effective hair removal treatment (maximum pulse freq. setting 3).
IPL Hair Removal Variation 1
This procedure is the most popular among professionals as it requires only shaving prior to the application. It will be necessary to remove all hair above the skin with a razor. Any hair which protrudes above the skin may cause pits in your optics which will reduce the overall efficiency of the device.
Turn your IPL driver to maximum pulse frequency (setting 3) with HF assist enabled. Place the IPL emitter port against the skin in the area where the unwanted hair growth is occurring. Press the trigger switch down for 1 second delivering eight total emissions equating to 220 jcm2 of energy density) then move to the next treatment area and repeat. The treatment will effectively damage or destroy most or all anagen follicles in an area of 2.5 cm2 which have dark pigment.
IPL Hair Removal Variation 2: Deep Tissue Trauma With Follicle Ex-traction with Carbon Dye**
Before applying treatment, remove all hair from the area by tweezing or waxing. IN. hair removal is most effective when applied to an empty follicle shaft. Human hair simply does not normally have enough pigment to allow for sufficient heat exchange to cauterize, desiccate and necrotize the cells which produce hair. To compensate for this lack of ‘quantitative’ and ‘qualitative’ photon targets, rt will be necessary to place a high-density carbon dye inside the follicle prior to treatment. Using a cotton-tipped applicator, completely cover the treatment area with the special dye included in your krt. Massage the dye into the follicle pore with a firm downward circular motion. Repeat 2-3 times to saturate the follicle pore. Use an ethyl alcohol based wipe (isopropyl alcohol will not dissolve the dye) clean the excess from the surface of the skin. At this point you will have all de-sired follicles visibly highlighted with a dark spot. Perform the standard IPL treatment as out-lined in ‘IPL Hair Removal Variation 1’ as normal. Don not over treat. Applying 7 or more pulses to the same area may result in a burn (leading to blistering).

Treatment Efficacy

Permanent hair removal is a gradual process which takes 90 days or more for complete destruction of the follicle tissues. Each hair must go through its entire growth cycle for it to be effectively treated. Generally, it is only during the early anagen phase that it is vulnerable to destruction. The following chart will give you an accurate example of what the reduction in growth activity should look like from 30, 60 , and 90 days of treatments.

Important Considerations for Safe IPL Hair Removal Treatment Treatment

Around or Near the Eyes : Great care must be exercised when working near the eyes. The IPL emission is powerful enough to actually penetrate the eyelid and permanently damage the eye. Having the patient close their eyes is not satis-factory protection. The use of a dark-colored damp wash cloth which is folded over four times will deflect the harmful radiation; however, only IPL protective eyewear is recommended.
Treatment Around or Near Mucus Membrane s: IPL radiation will severely damage the tissues inside the nose and ear canal. Treatment should be avoided in these areas altogether.
Treatment Around or Near the Genitals: IPL hair removal is safe for appli- cation to the pubic regions including the reproductive organs of both sexes. Care must be taken into consideration in these areas due to the increased level of neural sensitivity.
Treatment Around or Near the Areola (nipple): IPL hair removal is safe and effective on hair growth which occurs from the areola of both sexes.
Post-Treatment: The skin surrounding the treatment area may experience short- term erythmia (reddening) which will subside within 12-24 hours. Should the treatment area show signs of excess scabbing you may wish to reduce the overall treatment time or intensity. The application of a post-treatment cooling and healing gel (such as Aloe) is encouraged to speed heal-ing and reduce sensitivity. Instruct the patient to refrain from applying cosmetics or sunbathing for at least 24 hours. Over Treatment: Each IPL pulse sends a photon ‘bundle’ deep into the skin where it damages the hair follicle tissues. This IPL radiation also will have mild effects on capillaries and skin tissue. If too many IPL pulses are administered the capillary network will begin to break down. This will create a bruise which will take several days to subside.
The general rule of thumb is to patch test the skin with 7 pulses then send the patient home. Have them back in the office in 24 hours to observe the reaction. If there is no burning or bruising, ad-minister the full treatment. It is not recommended to deliver more than 10 pulses to one stationary area at a time. If more than 10 pulses are delivered the technician should make a small circular motion with the IPL head to avoid sending all the energy through the exact same entry points.

UK
  Beam characteristic|   Flash Lamp|  Warranty:  1 Year
  Pulse duration|   Manual Adjust|  Emission Indicator: Yes
  Weight|   15 kg max|  Key Lock:  Yes
  Optics|   Glass|  Beam Shutter:  No
  Dimensions|   170 x 500 x 370 mm|  21CFR 1040, IEC 825-1:1993: No
  Fluence| 120J/cm2 max
---|---
  Energy Instability| 19% maximum
  Safety goggles| OD 8.0 @ 100-1000nm (minimum) suggested.
  Electrical requirements| s  100/120 VAC, 50/60 Hz nominal, 1.0 A max.  220 or 240 VAC, 50/60 Hz  nominal, 1.2 A max.
  Ambient operating temperature| 10°C to 30°C
  Ambient storage temperature| -25°C to 70°C

Intense Pulsed Light Tattoo Removal

Nearly 1/2 of all people with tattoos eventually want them removed. Until recently these people had no viable (and safe) options available to them. In the mid 1980’s lasers had been used experi-mentally to remove the pigment with encouraging success rates. A newer procedure used an in-tense pulsed light. Surprisingly, lasers and IPL’s do not actually burn the ink out; they fracture it into tiny pieces which are then removed from the skin by your immune system.
On average, professional tattoos require 5-6 treatments, while amateur tattoos may require 3-4 treatments, spaced approximately 1-2 weeks apart. The number of treatments depends on the amount and type of ink used and the depth of the ink in the skin. Occasionally technicians have needed to treat a tattoo 5-10 times.
What should I charge for the procedure? The fee depends on the size of each tattoo, and how many treatments it takes to lighten or remove it to your satisfaction. Each tattoo treatment gener-ally costs $135 for the 1st square inch and $25 for each additional inch. If more than one tattoo is being treated at the same time, you may offer pricing alternatives. A consultation fee of $40-$60 should be assessed for this quote.
What will the treatment be like? It is less painful to have a tattoo removed than getting it put on. A numbing spray and ice pack should be applied before the procedure. After the procedure the treated area may blister, swell, crust, scab, or bleed slightly. Care for the treated area daily in order to prevent infection and to get the best possible healing results. The tattoo will then gradu-ally fade for 1-2 weeks when it can be treated again. You may see additional fading for as long as several months so you can space the treatments farther apart but not closer than 7-10 days.
Important Considerations for Safe IPL Tattoo Treatment
Treatment on Skin with Hair Growth : One of the major side effects of IPL tattoo removal is destruction of hair follicles. If your client would like a tattoo removed from an area in which there is ‘wanted’ hair growth, manually extract all follicles before treatment. The use of an aggressive depilatory wax is best. If the follicle is removed there will be far less damage to the papilla cells which produce growth. The hair follicle unit will regenerate in 2-3 weeks.
Treatment Around or Near the Genitals: IPL tattoo removal is safe for application to the pubic regions including the reproductive organs of both sexes. Care must be taken into consideration in these areas due to the increased level of neural sensitivity. The patient may find the process uncomfortable without a topical desensitizing spray. Treatment Around or Near the Eyes : Great care must be exercised when working near the eyes. The IPL emission is powerful enough to actually penetrate the eyelid and perma- nently damage the eye. Having the patient close their eyes is not satisfactory protection. The use of a dark-colored damp wash cloth which is folded over four times will deflect the harmful radiation; however, only IPL protective eyewear is recommended. Post-Treatment: The skin surrounding the treatment area may experience short-term erythmia (reddening) which will subside within 12-24 hours. Should the treatment area show signs of excess scabbing you may wish to reduce the overall treatment time or intensity. The application of a post-treatment cooling and healing gel (such as Aloe) is encour-aged to speed healing and reduce sensitivity. Instruct the patient to refrain from applying cosmetics or sunbathing for at least 24 hours. REFERENCES Nestor, Mark S., MD, PhD, *Laser Hair Removal: Clinical Results and Practical Applica-tions of Selective Photothermolysist Skin & Aging, January 1998. Lask, Gary, MD, &man, Monica, MD, Slatkine, Michael, PhD, Waldman, Amir, PhD, Ro enberg, Zvi, PhD, laser-Assisted Nair Removal by Selective PflOtOtherMOtySiS: Preliminary Results’, the American Society for Dermatology Surgery, 1997.
—Black ink absorbs all wavelengths of light and responds very well to 1PL treatments.
—Green and Blue ink absorbs 670-8gOnm light best and responds very well to 1PL treatments.
—Red, Orange, and Purple inks absorb 500-700nm light best and responds very well to 1PL treatments.
—Turquoise responds variably, depending on the pigments in the ink.
—Flesh tones tend to reflect light and does not respond well to IPL treatments.
—Yellow tends to reflect light and does not respond well to IPL treatments.

IPL Tattoo Removal

To begin the process it will be necessary for you to scrub the skin over the tattoo with an abrasive applicator. This is will remove the outer layers of the epidermis which will allow for greater pene-tration of the IPL radiation. Using a depilatory wax or epilation paper, remove all hair from the tattoo area. Hair growth will block some of the IPL radiation from entering the tattoo. Follicles in the skin of the tattoo will also be permanently damaged by the radiation which may not be desirable to your patient.
Apply the pre treatment TCA enhanced cooling and coupling gel to the tattoo. This is a very impor-tant step which should not be omitted. Although the gel does contain the desensitizing compound lidocaine it will be quite common for the patient to feel some burning in the minutes and hours following the procedure. If the patient requests extra relief, apply a cold pack as needed.

The Treatment Procedure

Carefully power up your IPL (see page 3). Dial in full intensity ‘high’ pulse frequency setting 3. Place the optics side down (in contact with the skin) on top of the tattoo.
Deliver 7 pulses (approximately 220 joules) to each area of 2.5 cm square (depending on color). Be very systematic and thorough, but resist the temptation to over treat. Applying more than 220 joules per cm2 may burn the skin.
Black ink can be successfully treated with 120 jcm2. Blue and green normally re-quires 180 jcm2, and red requires up to 220.
The example tattoo at right would require 1530 pulses for a total of roughly 5,000 joules. In picture number 4, you can see some of the redness, swelling and scabbing which may show up 1-3 days following treatment. In picture number 5 and 6, you can see some fading of the tattoo, but also a mild form of hypo pigmentation (loss of the patient’s natural skin color). This condition is temporary and will subside as the melanin regenerates with natural healing.
In picture number 7, you can see that the tattoo has faded to a point where it is not recognizable. This type of tattoo should require about 6 treatments over 7 months. It is always a good idea to take pictures of your patient’s treatment areas to show them the steady improvement. This will help them to stay committed and motivated as the process requires a substantial investment of time.

average

IPL Resurfacing and Photo-Rejuvenation

IPL resurfacing is performed using a beam of light energy which vaporizes the upper layers of dam-aged skin at specific and controlled levels of penetration. The procedure of- . fers many advantages which others do not have.
Unlike Microdermabrasion, the IPL penetrates deeply into the dermis where promotion of collagen proteins can be stimulated. Chemical peels can be very unpredictable and dangerous while an IPL can be dialed in to deliver precisely the right amount of radiation to produce safe and effective results. All resurfacing treatments work essentially the same way. First, the outer layers of damaged skin are stripped away. Then, as new cells form during the healing process, a smoother, tighter, younger-looking skin surface appears.
For superficial or medium resurfacing, the IPL can be limited to the epidermis and papillary dermis. For deeper resurfacing, the upper levels of the reticulas dermis can also be removed. Varied penetration allows treatment of specific spots or wrinkles.
It’s also important to consider the length of recovery when choosing among the skin-resurfacing alternatives. In general, the more aggressive the resur- facing procedure is, the more prolonged the recovery is likely to be. “Light” resurfacing procedures, such as superficial chemical peels or superficial IPL resurfacing, offer shorter recovery times. However, these lighter procedures may need to be repeated multiple times to achieve results comparable to those achieved with more aggressive techniques.

General Dermatology

Treatment of additional skin afflictions such as Rosacea, Fine Wrinkles, Sun Damaged Skin, Acne Scars, Age Spots, Large Pores, Acne Prone Skin.
As the IPL goes over the dermis, vascular spaces with hemoglo-bin in them absorb the light energy thereby heating the sur-rounding tissue and stimulating the fibroblasts to produce type 1 collagen and dermal proteins. The treatment rearranges and/or replaces the solar elastosis in the upper dermis, resulting in NEW collagen formation.
What used to be loose, irregular collagen in the dermis is now tighter, refreshed and rejuvenated.
The benefits of each IPL treatment over all other skin rejuvenation procedures include: Low down-time, non-surgical, little pain and discomfort, immediate results after 1 – 2 treatments, affordable, enhances your own collagen growth, produces more dermal proteins and treats most types of skin.

Treatment Procedure: Resurfacing and Wrinkle Reduction

Deliver 7 pulses (approximately 220 joules) to each area of 2.5 cm square. Be very systematic and thorough, but resist the temptation to over treat. Applying more than 220 joules may burn the skin.
Figure 1 shows normal sagging and wrinkling of the skin which can be expected as humans age. Figure 2 shows excellent improvement on a 47 year old female after 6 treatments. Always use an approved cooling and coupling gel with your IPL treat-ments. This will substantially reduce patient discomfort and protect the dermis from excessive thermal retention or damage from heat. It will also increase the ‘translucency’ (rate of which the skin will allow IPL energy to pass through) factor which improves overall results.
Call your patient back in for a follow up in 48 hours. Additional treat-ments may be applied in 7-10 days depending on the level of dermal trauma the patient experience and their rate of healing.

Treatment Procedure: Rosacea

Apply ‘IPL Spider Vein Treatment Gel’ (see back page of pamphlet for ordering information). This formula contains activated phylloquinone, which sup- ports healthy regeneration of new capillaries (reducing the recurrence of future Rosacea) by strengthening the capillary walls.
Deliver 5 pulses on high power (approximately 180 joules) to each area of 2.5 cm square. Be very systematic and thorough but resist the temptation to over treat.
Figure 1 shows severe late stage Rosacea of a 30 year old male. Figure 2 shows the substantial improvement achieved with 20 treatments over 24 months. Spider veins and enlarged capillaries require more treatments overall than most other laser procedures. Treatment Procedure: Age Spots
This condition is caused by melanin deposits in the skin which do not fade. Normal melanin will darken (proliferate) with exposure to sun, but will also fade over 4-6 weeks when the exposure is stopped. It is most common in the elderly but occurs in all ages. IPL treatments are remarkably effective for this affliction.
Apply ‘IPL Wrinkle Treatment Gel’ (see back page of pamphlet for ordering information). Deliver 6 pulses (approximately 200 joules) to each area of 2.5 cm square. Fading of the age spots (also known as ’liver spots’) will be evident after 4-6 weeks. Figure 3 shows moderate age spot activity on a 46 year old female. Note the improvement in figure 4 showing nearly complete regression of the skin disorder. This patient underwent 3 treatments over 11 weeks.
Treatment Procedure: Scars
This condition can be caused by any trauma to the skin from acne, sun burn, cuts, scrapes and surgical procedures. To reduce the appearance  of the scar, it will be necessary to rebuild the collagen proteins in the skin with IPL radiation. This process is extensive (especially in cases where severe scarring exists). It may take 5-10 treatments over 12
months to achieve desired results. Apply ‘IPL Scar Reduction TreatmentGel’ (see back page of pamphlet for ordering information).
Deliver 7 pulses (approximately 220 joules) to each area of 2.5cm square. Remember, applying more than 220joules may burn the skin so this  procedure must be done very carefully. You must deliver the seven pulses in under one second for maximum thermal heat exchange in the tissue (simply hold the trigger switch down).
Figure 5 shows a 28 year old female with acne scarring which was left over from teenage puberty.
There are very deep pocks, which are the hardest to improve. In figure 6, the appearance of the scars (including the pock) has improved 90%.
Treatment around the eyes must be done with adequate protection.
Exposure to IPL radiation (even through the eye lid) can permanently injure the eyes up to and including vision quality loss.
Photos are for example purposes only and may not indicate results which will be achieved on every patient. Medical IPL treatments for dermatology purposes are rated by improvement and not by cure. Many skin conditions such as Rosacea may return and require future treatments to be controlled. Advise your patient to expect improvement but caution them as to which degree of improvement they will be able to achieve.

IPL 350-LS Instrument

The IPL 350-LS comes with a 220jcm2 maximum fluence per second adjustable pulse frequency (fixed pulse duration) instrument for superior operator control. The addition of high frequency shortwave energy substantially amplifies the thermolysis deep in the tissue for greater intensity and improved results. RF enhanced IPL treatments enable a greater range of treatments.

Trouble Shooting

Should you encounter technical problems with your IPL 350 system, refer to the following guide for potential problems and the appropriate solution.
—Unit is plugged into the wall, all accessories are correctly inserted into the unit but no IPL output is being registered.
++Check all connections. Plug and unplug each one being sure all contacts are sound.
++Check all cords. Due to continual bending and fatigue, wires may fray or break resulting is full loss of power.
—Unit hums or makes abnormal noises.
++Unit needs servicing. A clicking sound is normal.
—IPL output is weak.
++Emitter may be obstructed with debris (dried coupling gel, dirt etc.). Clean thoroughly with a cotton tipped applicator and alcohol. If the performance of the IPL does not improve after cleaning the head your unit needs servicing by a qualified agent. Contact technical support for assistance.
—No output from the IPL is registered after all trouble-shooting suggestions listed above have been checked.
++Probable flash emitter failure. Unit needs servicing.

IPL 350-LS Power Output Capabilities| |
---|---|---
Standard| Intensity Setting| 3, HF Function Disabled| 3, with HF Assist
Treatment Duration| 1 second (7-8 pulses)| 1 second (7-8 pulses)
jcm2/second| 120| 180
Intense| Intensity Setting| 3, HF Function Disabled| 3, with HF Assist
Treatment Duration| 2 seconds (14-16 pulses)| 2 seconds (14-16
jcm2/second| 180| 220
Gentle Gentle| Intensity Setting| 2, HF Function Disabled| 2, with HF Assist
Treatment Duration| 1 second (6 pulses)| 1 second (6 pulses)
jcm2/second| 60| 90

Avarice Beauty IPL 350-L5 Ultra and Driver
Replacement Parts 1-888-621-4484 IPL Eyewear Eyewear # D-213-4600 Each $39.95 IPL350 Emitter Tip Replacement IPL # D-213-6700 Each $79.95 Carbon Dye 50m1 Carbon Dye # P-213-2500 Each $29.95 Carbon Dye 50m1 Gel Carbon Dye # P-213-2505 Each $29.95 IPL Tattoo/Wrinkle Treatment 50m1 Gel Stock # P-216-2500 Each $29.99 IPL Spider Vein Treatment 50m1 Gel Stock # P-216-2600 Each $29.99 IPL Pre Treatment Lidocaine 3.4% 50m1 Gel Stock # P-216-2607 Each $29.99 IPL Nail Fungus Treatment 50m1 Gel Stock # P-216-2509 Each $29.99 IPL Wrinkle Reduction/Skin Toning Treatment 50m1 Gel Stock # P-216-2709 Each $29.99
Prices are subject to change without notification.
To order on-line, go to http://www.centre-biotechnique-avance.com
For technical assistance beyond what this manual provides, please e-mail support@centre-biotechnique-avance.com Please allow 24 hours for processing.
The IPL 350-LS produces IPL radiation which can be harmful to the eyes. Always wear protective eye wear while operating this equipment. Intense Pulsed Light has the capability to burn the skin if the technician does not closely observe the patient’s reaction to the procedure. IPL treatments will result in destruction of hair follicles and is irreversible. Always plan ahead before undertaking detail work such as eyebrow shaping or hairline contour-ing. Patch test a small area (no larger than lcm by 1cm square) before full application. Allow 24 hours to deter-mine the patient’s reaction before applying full treatment. UL8529001
Printed in USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>