hp 4202dn Color LaserJet Pro Printer User Guide
- June 10, 2024
- HP
Table of Contents
4202dn Color LaserJet Pro Printer
User Guide
Power on
Plug in and power on. On the control panel, choose your language and country/region by turning the dial. Press dial down to select.
Load paper
Load paper and adjust the guides.
Note: If loading legal paper, squeeze the side latch at the front of the
tray and pull forward. When inserted, the tray will extend from the front of
the printer approximately 2 inches (50.8 mm).
Connect printer
On the control panel, choose your connection method. If the printer will support multiple users, select Ethernet.
Ethernet
- Connect an Ethernet cable from the printer to the same network as the computer.
- Press “Continue” on the control panel to confirm the IP address. Then continue with the steps on the control panel until you reach the home screen.
USB
- Connect the USB cable to the port on the back of the printer and to the computer.
- Continue with the steps on the control panel until you reach the home screen.
Install printer software
- Go to hpsmart.com/download to download the HP software and print drivers.
- Install software and complete setup.
Get help with setup
Find setup information and videos online.
https://www.hp.com/support/colorlj4201-4203
© Copyright 2023 HP Development Company, L.P.
Printed in XXXXX
References
- hp.com/support/colorlj4201-4203
- HP Smart
- HP Color LaserJet Pro 4201-4203cdn/dn/dw Printer series | HP® Customer Support
- HP Smart
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>