PHILIPS EasySense SNS412 IA Fixture Mount Sensors Installation Guide
- June 10, 2024
- Philips
Table of Contents
PHILIPS EasySense SNS412 IA Fixture Mount Sensors Installation Guide
Note: Below data applicable for SNS412 IA..
Electrical Information
Input Voltage| Powered by SR driver low-voltage interface
Current Consumption| 13mA
Nominal Power Consumption| 200mW
Standby Power| < 1 W on luminaire level, including driver standby power
Environment & Approbation
Operating Ambient Temperature Range| -30°C to 65°C
Operating Humidity| 20% – 85% non condensing
Storage Temperature| -30 °C – 85 °C
Storage Humidity| 0-95% non condensing
Max Case Temperature (Tcase)| 65°C
Agency Approbations| UL, FCC; Tested and approved for use in plenums
Limited Warranty| 5 years
Digital Interface| Xitanium SR
Other
Status Indicators| Yellow LED always on
No. Drivers per Node| Four (max)
Field Configuration| via BLE or Zigbee, via the Interact system app or
gateway
Operation and Configuration via Mobile App
SNS412 IA requires commissioning to operate. The node can be commissioned and
configured via the Interact system.
FCC and IC Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules for the United States
and Industry Canada (IC) license-exempt RSS standard(s). These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment and is intended for
commercial use only. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Operation
of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense. Any changes or modifications not expressly
approved by Signify could void the user’s authority to operate this equipment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body
Wireless Node Part Number
| Commercial Product Name | Order Code |
|---|---|
| EasySense SNS412 IA | SNS412 IA,12NC:929003430913 |
LED Drivers
The EasySense SNS412 IA sensors are compatible with Xitanium SR drivers. To
find the SR driver that fits your application needs and for product
specifications, please visit
www.signify.com/xitaniumsr
**Wiring Diagram***
| Connection | Color | Connection | Color | |
|---|---|---|---|---|
| Green | Ground | Purple | DA+ | |
| White | Neutral | Brown | DA- | |
| Black | Line | Red | LED+ | |
| Blue | LED- |
Sensor Dimensions (in/mm)
Mounting Dimensions (in/mm)
Mounting in U-shaped slot in sheet metal (max thickness 1 mm)
Mounting in cut-out in sheet metal (thickness 0.7 mm to 1.0 mm)
Note: Consult factory for accessory mounting ring to secure sensor to cut-out.
Fixture with EasySense installed
Mounting in a slot
Mounting in a cut-out with mounting bracket
Accessory Mounting Ring
- Part Number SMR-50 / Set of 50.
- Ordered separately, not included.
Accessory Mounting Bracket
- Part Number SMB-50 / Set of 50.
- – Ordered separately, not included.
References
- EasySense Fixture-Mount Sensor - Philips lighting
- Xitanium Sensor Ready Drivers | Advance | Signify Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>