Qingdao Hengrun Yuantong Trading Co Ltd TB1001 Computer Speaker User Guide

Qingdao Hengrun Yuantong Trading Co Ltd TB1001 Computer Speaker

Package Contents

1. 1x Sound Bar (Model: TB1001)
2. 1x 3.5mm Audio Cable
3. 1x Micro USB Charging Cable
4. 1x User Manual

Warranty Service

All our products are covered with 12 months of warranty service. If any problems occur, please contact the TBHATFY Customer Care Centre at [email protected].

Button Control

Charging the Soundbar

1. Connect the micro-USB end of the cable to the charging port of the computer soundbar.
2. Plug the USB end of the charging cable to a USS charging port or any active USB port. The light indicator will turn red when charging.
3. The LED indicator will turn purple when charging and will automatically tum off when fully charged.

Note

1. You can use the soundbar while it is charging.
2. We recommend charging the soundbar for at least 2 hours before using it for the first time.
3. We do not recommend keeping the soundbar plugged into any power source all the time, which may cause damage to the battery of the soundbar.
4. We recommend that please keep the soundbar charging when you are using it.

Operation

Bluetooth Connection

1. Turn on the soundbar. It will automatically go into Bluetooth mode and there will be a voice prompt “Bluetooth mode”. The device is in Bluetooth mode initially.
2. Activate the Bluetooth function on your device and search for Bluetooth connections nearby.
3. Find “TB1001” in the search results and tap to connect.
4. There will be a short audio prompt once the soundbar is successfully connected to your device. And now the soundbar is ready to play.

Wired Connection

1. Plug the 3.5mm audio cable into the aux jack of the sound bar, and there will be a voice prompt “wired mode”.
2. Plug the other end of the audio cable to the headphone jack of your device, and now the soundbar is ready to play.

Note

1. If you want to switch to Bluetooth mode while the sound bar is plugged into any device with the aux cable, please kindly press the mode button once and the soundbar will go into Bluetooth without unplugging the cable.
2. If the sound bar is correctly plugged into your devices but no sound comes out please kindly check the sound setting of your device, and choose TB 1001 to be the sound output device.

If Card / USB Card Mode

1. Insert your TF card or USB card into the slot on the soundbar.
2. The sound bar will automatically enter the corresponding mode to play music.

Important Safety Instructions

Please read the instructions thoroughly before using this product and retain it for future reference.

Warning

1. Never place the sound bar near the heat sources.
2. Only use this sound bar indoors.
3. Never place this sound bar on other electrical equipment.
4. Keep the product clean and dry. Do not clean the product with detergent-containing alcohol, ammonia, benzene, or abrasives.

Caution

1. Do not expose this product to high temperatures.
2. Store this product in a dry place. Keep it away from humidity and corrosives.
3. Do not immerse the sound bar in water or expose them to humidity for a long time.
4. Avoid dropping.
5. Close attention is needed when using near children.
6. Unauthorized disassembly of any parts of this product is forbidden.
7. Always ask a professional technician or authorized personnel for repair.

Cleaning and Maintenance

1. Clean the sound bar on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.

FCC Warning Statement

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements.

Manufacturer: Qingdao Hengrun Yuantong Trading Co., Ltd. Address: Building 7, No. 177, Zhuzhou Road, Laoshan District, Qingdao City, Shandong Province, China E-mail: [email protected].

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>